lathes used for sale (3,161)

Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-47195-29

With chip conveyor, manuals present Auction-ID: A7-47195-43

Includes: brake drum with integrated clutch with 6 pins Auction-ID: A1-41277-221

Mori Seiki CL 253 B CNC Lathe - Monitor defective • Maximum turning diameter: 260 mm • Maximum turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Rod capacity: 74 mm Lrsbknjy D Rnyo Aurwel • Rapid traverse (X/Z): 18 / 24 m/min • Tool feed (BMC): 3,000 rpm / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) • Turret: 12 stations VDI 40 Auction-ID: A7-47048-8

turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CENTRE LATHE KNUTH DL 550 / 1500 B with big whirling machine Swing over bed dia. 1100 mm Swing over cross slide dia. 1590 mm Swing in the gap dia. 1270 mm Spindle bore 105 mm Bed width 550 mm Length x width x height: 3510 x 1590 x 1760 mm Weight: 5250 kg Auction-ID: A7-47067-4

Technical details Type: CNC turning center / CNC lathe Power supply: 400 V / 3 phases Installed power: 20 kVA Maximum turning diameter: 210 mm Maximum turning length: 460 mm Bar capacity: 42 mm Spindle speed: Up to 6000 rpm Hydraulic chuck: 6” / 3 jaws X-axis travel: 215 mm Z-axis travel: 520 mm Rapid traverse speed X/Z: 30 m/min Main motor power: 11 / 15 kW Bed configuration: 30° inclined heavy-duty bed Equipment: - Automatic turret - Manual pulse generator - Hydraulic chuck - Adjustable hydraulic quill - Automatic lubrication system - Cooling system Application: Precision CNC turning and bar machining operations Condition: Used Auction-ID: A7-40834-7

turning diameter: 700 mmturning length: 1250 mmcontrol: Siemens 840 G Ergoline spindle passage: 104 mmspindle speed:: 4000 spindle motor: 35/45 kWmax. torque on the spindle: 600/700 NmSpindlespeed subspindle: 4000 U/minmilling head -swivable +/-: +/- 120 °milling drive: kWturning speed range - milling: 12000 U/mintool taper: Capto C6 tool magazin:: 36 rapid traverse: m/miny-axis: +/- 200 mm mmdimensions: mweight of the machine ca.: 18,5 tUsed CNC- Lathe with sub- spindle and milling head- milling head full axis + 1° clamping- chipconveyor- aircondition for elextric box- new milling spindle in 2025- absolute scale X/Y/Z1 axis- Shop Mill dialig programming- 8/20 bar coolant programmable- band filter system- Bar package (Partscatcher, prepared for ba magazin)Machine sold without jaws.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 100 mmturning length: 75 mmcontrol: FANUC Oi-TF total power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mori Seiki CL 153 CNC Lathe Turning diameter over bed: 515 mm Maximum turning diameter: 400 mm Maximum turning length: 303 mm Rapid traverse X-axis: 2010 m/min Rapid traverse Z-axis: 2400 m/min Spindle holder: A2-5 Spindle bore: 67 mm Through-hole spindle: 43 mm Maximum rod diameter: 33 mm Spindle speeds: 60–6000 rpm X-axis travel: 235 mm Travel Z-axis: 310 mm Spindle drive motor: 10 hp 12-speed revolver Electrical connections: 220 V, 60 Hz Auction-ID: A7-47048-23

Turning diameter max. 390 mm Turning length max. 572 mm Control MSD 501 Circumferential diameter over bed 700 mm Circumferential diameter over face slide 560 mm Distance between tips 725 mm Standard turning diameter 248 mm max. turning diameter 1: 390 / 2: 260 mm Main spindle: Speed range - main spindle 35 - 3,500 min/-1 Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A2-8 Spindle bearing diameter 130 mm Spindle bore 86 mm Usable rod diameter 62 mm Travels: x-axis 1: 238 / 2: 173 mm z-axis 1: 650 / 2: 650 mm Tool turret: Number of turrets 2 Number of tool positions 10 + 8 pos. Number of driven tool stations - pos. Switching time 0.3 sec Shaft diameter 25 mm Shank diameter of the drills max. 50 mm Tailstock: Tailstock travel 500 mm Quill diameter 110 mm Tailstock mount MK 5 Quill stroke 150 mm Feeds: Rapid traverse X1/2: 18 m/min Rapid traverse Z1/2: 24 m/min Feed  ...

turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1500 mmgreates pass round over bed: 490 mmturning dia. over face-slide: 280 mmcontrol: Heidenhain Manual Plus Speed range - up to: 3000 U/minspindle bore: 65 mmpower capacity - workpiece power: 12/16 (100/60%) kWweight of the machine ca.: 3,5 tEquipment/Accessories:- Steady rest- Chuck- Tool holders- Drill bits- Tips- Multifix holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...

Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Incl. chip conveyor, tailstock, tool turret Auction-ID: A7-47048-5

Mori Seiki ZL 250-600 CNC Lathe Power of the main spindle 18.5 Kw Passage of the main spindle rod 73 mm Diameter of rotation 250 mm Length of rotation 650 mm Number of revolutions of the main spindle 3500 Number of Tool Turrets 2 Number of first turret tool locations 12 Number of motorized first turrets 12 Travel X-axis first turret 238 mm Travel Z-axis first turret 650 mm Number of second turret tool locations 10 Number of fixed tool positions second turret 10 Travel X-axis second turret 173 mm Z-axis travel second turret 650 mm Tailstock Quill stroke 150 mm Chip conveyor Auction-ID: A7-47048-19

Mori Seiki NL 2500 Y/700 High Performance Lathe Turning diameter 275 mm Turning length 705 mm Control MAPPS II MSX 850 Circumferential diameter over bed 923.8 mm Circumferential diameter over face slide 755 mm max. turning diameter 356 mm max. rod diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Spindle bearing diameter 140 mm C-axis 0.001 ° Travel x-axis 260 mm z-axis 795 mm y-axis 100 (+/- 50) mm Revolver Tool Positions 12 Pos. Shank height for square tool 25 mm Shaft diameter for drill rod max. 50 mm Turret switching time 0.25 sec. Speed range of the indicated Tools 6,000 min -1 Drive power - applied Tools 5.5 / 3.7 kW Feed Rapid traverse X-axis 30 m/min Rapid traverse Z-axis 30 m/min Rapid traverse Y-axis 10 m/min Tailstock Tailstock Shift 564 mm Quill diameter 80 mm Pick-up ...

max. turning diameter 356 mm Turning length 510 mm Control M 720 BM MAPPS II Circumferential diameter over bed 923 mm Circumferential diameter over carriage 755 mm Standard turning diameter 275 mm Rod diameter max. 65 mm Main spindle: Spindle nose A2-6 Speed range - spindle max. 5,000 min/-1 Drive power - spindle motor 15 / 11 kW Spindle bearing diameter 120 mm Spindle bore 73 mm max. usable rod diameter 65 mm C-axis 0.001 ° Sub-spindle: Spindle nose A2-5 Speed range - spindle max. 6,000 min/-1 Drive power - spindle motor 11 / 7.5 kW Spindle bearing diameter 85 mm Spindle bore 43 mm max. usable rod diameter ( - ) mm C-axis 0.001 ° Travels: Travel of counter spindle B: 624 mm Travel - x 260 mm Travel - z 590 mm Travel - y 100 (+/-50) mm Tool turret: Turret head (x-fold) 12 powered stations 12 pos Shaft diameter 25 mm Shaft diameter for drill rod max. 50 mm Speed range of the ...

Mori Seiki SL 300 BMC/700 CNC Lathe Max. turning diameter 715 mm X-axis 250 mm Z-axis 800 mm Spindle bore 77 mm Speed 3500 rpm Power spindle 18.5 kW Tool Changer 12 Speed driven tools 4500 rpm Length 3500 mm Width 2200 mm Height 2400 mm Weight 9000 kg Incl. jaw chuck and tool holder in the turret. No other accessories Auction-ID: A7-47048-11

Mori Seiki CV 500 Machining Center X-axis: 510 mm Y-axis: 510 mm Z-axis: 510 mm Pallet length: 750 mm Pallet width: 550 mm Spindle Type: BT-40 Max. workpiece weight: 200 kg Spindle motor power: 7.5 kW Number of tools: 24 Spindle speed: 8000 rpm Dimensions: L 2000 x W 3600 x H 2750 mm Machine weight: 4400 kg Auction-ID: A7-47048-28

Mori Seiki SL 203 MC, CNC Lathe Year of Make: 2000 Incl. chip conveyor, tailstock Incl. jaw chuck and tool holder in the turret. Auction-ID: A7-47048-9

turning diameter: 300 mmturning length: 600 mmcontrol: FANUC, 18i-TB turning diameter over bed slide: 230 mmtravel x1: 165 mmtravel z1: 700 mmtravel x2: 190 mmtravel z2: 720 mmtravel -y axis: +/- 50 mmmain spindle bore: 76 mmmain spindle speed: 5.000 U/minmain spindle drive: 22 kWmax. torque on the spindle: 208 Nmsub spindle bore: 76 mmsub spindle speed: 5.000 U/minsub spindle drive: 22 kWmax. torque on the spindle: 208 Nmtool turret: 2 x 12 Stat.number of driven tool stations: 2 x 12 speed of driven tools: 5.000 U/minmax. torque: 47 Nmwork piece power: 5,5 kWC-axis resolution: 0,001 °rapid traverse x + z axis: 20 / 40 m/minrapid traverse y-axis: 7,5 m/mintotal power requirement: 68,4 kVAAccessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret,  ...

turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...

Auction-ID: A7-46758-3

faceplate diameter: 850 mmswing diameter: 1200 mmturning height: 1000 mmControl: Siemens type: 840 D Tool changer: 36 Pos.x-travel: 870 mmz-travel: 1020 mm: live tooling: c-axis: 0weight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...