lathes used for sale (3,094)

Serial number: L2104250,Power supply - 400V/230V, 50Hz,Power 9,0 kW Auction-ID: A7-40851-4

Operating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 20 ATip length: 1000 mmCenter height above bed: 250 mmTurning diameter over bed: 500 mmCenter height over support: 150 mmTurning diameter over support: approx. 300 mmSpindle passage: approx. 58 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck FORKARDT, diameter: 200 mmalso a two-axis digital display from the manufacturer HEIDENHAINSpeed: up to 2500 rpm Auction-ID: A7-49089-410

Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-49302-3001

Sub spindle Driven tools Y-axis Technical Details Drehdurchmesser max. 246 mm Drehlänge max. 445 mm Supporting Fanuc 32 iS Distance between Spitzen 665 mm Spitzenhöhe 365 mm Length diameters over bed 500 mm Length diameters over shelf sections 375 mm Standard diameter 170 - 210 mm Main spindle: Max. Drehzahl Main Spindle 6,000 min/-1 Antriebsleistung - Main spindle 12 kW Max. torque 115 Nm Spindle bearing diameter: 100 mm Spindle drilling 73 mm max. Useless rod diameters 50 mm C-Achse 0.001 ° Spindle head FL 140 h5 max. Futterdurchmesser 170 - 210 mm Futterdurchmesser ( - ) mm Gegenspindle: Max. Drehzahl Gegenspindle 6.000 min/-1 Antriebsleistung - Gegenspindle 7.5 kW Max. torque 48 Nm Spindle bearing diameter: 90 mm Spindle drilling 44.5 mm max. Useless rod diameters 37 mm C-Achse 0.001 ° Spindle head FL 140 h5 max. Futterdurchmesser 170 mm Futterdurchmesser ( - ) mm Transport: ...

turning diameter: 310 mmturning length: 450 mmcontrol: Fanuc O-TC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc O-TC12-fold revolver (VDI30)3-jaw chuck main spindle3-jaw chuck sub spindlechip conveyortool measuring devicecoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 500 mmUmlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mmmax. Drehdurchmesser / max. turning diameter 310 mmmax. Drehlänge / max. turning lenght 450 mmX-Weg / X-travel 200 mmZ-Weg / Z-travel 450 mmDrehzahl / spindle speed 4500 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesStangendurchlass Hauptspindel / bar diameter main spindle 50 mmEilgang X / rapid feed X 24 m/minEilgang Z / rapid feed Z 30 m/min.Antriebsle ...

Operating voltage: 230 VFrequency: 50-60 HzRated current: 11 AControl: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)Turning length: approx. 300 mmCenter height above bed: approx. 100 mmTravel X: approx. 100 mm, Z: approx. 200 mmThe machine is equipped with a tailstock, a three-jaw chuck and a special tool turretincluding a mobile workbench and matching accessories Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. The illustrations serve only as examples. It cannot be guaranteed that the accessories shown are included in the scope of delivery Auction-ID: A7-49056-36

Auction-ID: A1-49309-10

Equipped with: groups cabinet, Auction-ID: A1-47359-94

Mori Seiki NL 2500 Y/700 High Performance Lathe Turning diameter 275 mm Turning length 705 mm Control MAPPS II MSX 850 Circumferential diameter over bed 923.8 mm Circumferential diameter over face slide 755 mm max. turning diameter 356 mm max. rod diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Spindle bearing diameter 140 mm C-axis 0.001 ° Travel x-axis 260 mm z-axis 795 mm y-axis 100 (+/- 50) mm Revolver Tool Positions 12 Pos. Shank height for square tool 25 mm Shaft diameter for drill rod max. 50 mm Turret switching time 0.25 sec. Speed range of the indicated Tools 6,000 min -1 Drive power - applied Tools 5.5 / 3.7 kW Feed Rapid traverse X-axis 30 m/min Rapid traverse Z-axis 30 m/min Rapid traverse Y-axis 10 m/min Tailstock Tailstock Shift 564 mm Quill diameter 80 mm Pick-up ...

- Maximum distance between points approx. 6000 mm. - Turning on bed approx. 740 mm. - Flip on carriage approx. 420 mm. - Bed width 510 mm. - Bar pitch diameter approx. 80 mm. - 18 rotation speeds from 16 rpm to 1250 rpm. - 3-jaw chainring, diameter 315 mm. - Fagor 20i-T 2-axis (X,Z) digital display. - Equipped with a bezel. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-14

TEACH-IN LATHE Inv. No. 13.051C1 Make CMT URSUS Model URSUS PLUS 250 Year 1996 Serial number 12628 Centre Distance 1.000 mm Max. Swing over Bed Ø 480 mm Max. Swing over Cross slide Ø 400 mm Spindle bore Ø 105 mm 2 ranges stepless 0 – 2.000 kW 8/11 Volt 380 Cycles 50 Including Toolholder Multifix 3-jaw chuck Ø 315 Auction-ID: A1-49027-47

NAKAMURA-TOME WT-300 CNC turning center equipped with LNS automatic bar feeder, designed for industrial mass production with high productivity. This configuration allows: Simultaneous machining thanks to double spindle and double turret Automatic bar feeding Continuous production without operator intervention Reduced cycle times The WT-300 + LNS bar feeder combination is an ideal complete solution for: Bar turning Mass production Industrial subcontracting Precision mechanics Automotive industry, watchmaking, general mechanics LNS bar feeders are a world reference in the automation of CNC lathes, which are highly sought after on the second-hand market. Auction-ID: A1-48554-5

turning diameter: 210 mmturning length: 580 mmcontrol: 840 D Siemenscentre height: 190 mmturning diameter over bed: 330 mmturning dia. over face-slide: 260 mmMain spindle:: turning speed range - main spindle: max. 4.000 min/-1power capacity - main spindel: 10 / 7,5 kWmax. Torque: 115 / 86 Nmspindle bore: 68,5 mmmax. usable bar diameter: 51 mmC - Axis: 0,001 °axis stroke:: travel -x axis: 185 mmtravel -z axis: 455 mmturret:: number of toolpositions: 12 pos.tool taper: VDI 30 Driven Tool Stations:: 6 pos.Tailstock:: tailstock adjustment: 400 mmintake pressure max.: 4.000 Nfeeds:: rapid traverse: X: 20 / Z: 30 m/minFeed force ( X / Y / Z ): 4,5 kNtotal power requirement: 21 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 8,0 x 2,2 x 2,0 mDocuments: Chip conveyor: Tailstock: Coolantsystem: C-axis: parts catcher: driven tool stations: Signal-Light: bar feeder: I ...

turning diameter: 400 mmturning length: - mmcontrol: DMG Mori SLIMline z-axis: ca. 750–755 mmx-axis: 276 mmy-axis: +/-60 mmgreates pass round over bed: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine is in very good condition and has recently been inspected and measured by a service technician.The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, andcounter-spindleCNC control:DMG Mori SLIMline multi-touch control (19/Operate 4.7 on Siemens)Screen language: German/EnglishMain spindle:A2-8 with AC motorDrive power 25.5/17 kW (40/100% duty cycle)Spindle speed 4000 rpmHollow clamping system, max. bar capacity 80 mmCounter-spindle:A2-6 designed as a built-in motor spindleISM 52 with hydraulic clamping deviceDrive power 14/13 kW (100/40% duty cycle)Spindle speed 5000 rpm12-sta ...

Technical data Manufacturer: Yamazaki Mazak Model: Quick Turn 28N/QT-28N-U Serial Number: 85751 Control: MAZATROL T32-2 Weight: 5,200 kg Chuck: hydraulic 3-jaw chuck, marking B-210A08 Clamping cylinder: S-1875 Max. pressure clamping system: 370 PSI / 26 kgf/cm² Max. permissible speed chuck: 4,200 rpm Configuration CNC lathe with tool turret, tailstock and enclosed work area. Chip conveyor available. Connected suction/filter unit visible. MAZATROL T32-2 control with color screen. Remarks Used condition with clear signs of wear and dirt due to age and operation. Control on the recordings turned on. Functional test or machining sample not documented. Note No technical documentation available. information researched to the best of my knowledge and belief. No guarantee is given for completeness and correctness. Auction-ID: A7-49302-168

GIANA 400 parallel tower – 6 metres between points GIANA 400 industrial parallel lathe, a high-capacity machine for machining long and large diameter parts. Distance between spikes: 6,000 mm Spindle Passage: 90 mm Passage over the trolley: 500 mm Passage diameter: 800 mm Equipped with Miniwizard digital display Chuck Bezel Counterpoint Adjustable feeds and threads Machine working perfectly Sold in the condition shown in the photos The seller has the necessary equipment to ensure the loading of the lot during collection. Mandatory pick-up dates are scheduled for September 14 and 21, from 9:00 a.m. to 12:00 p.m. Auction-ID: A3-46186-36301

Fanuc 18i-TB control,5 axes (X, Z, Z2, C main spindle, C counter spindle),max workpiece diameter X600,max turning diameter X330,max turning length 500,max length Z2 axis 500,12-position tool head,12-position driven tools,10” main holder C axis,6” counter spindle C axisOther machines, devices and tools unrelated to the subject of sale visible in the photos are not part of the offer. Auction-ID: A7-49398-6

General Description Universal horizontal centre lathe manufactured by TOS, model E3N. Designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces in toolrooms, maintenance workshops and general machining applications. Technical Details Manufacturer: TOS Model: E3N Machine type: Universal horizontal centre lathe 3-jaw self-centering chuck installed Tailstock Four-way toolpost Leadscrew Quick-change threading gearbox Flexible coolant nozzle Condition Used industrial condition. The machine appears complete with chuck, tailstock, four-way toolpost, leadscrew, quick-change gearbox and coolant system. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-33

turning diameter: 820 mmturning length: 6000 mmcontrol: Siemens Si 840 D sl max. workpiece weight between centres: 4000 kgtotal power requirement: 155 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 16350 x 3700 x 3850 mOriginal purchase price in 2019: EUR 1.550.000,-Time recording from Feb. 2025Operating hours = 38601 hMain spindle = 1958 hMilling spindle = 1760 hCNC control Si 840D slWorking area 6000 mmWorking height 1390 mmSwing diameter over bed slide/bed 820 mmX-axis travel +850 -25 mmZ-axis travel 6820 mmC-axis, smallest increment +/-0.001°Workpiece spindleSpindle head according to DIN 55026 A15Bathing through 160 mmFront diameter Bearing 240mm2-stage gearbox, infinitely variable programmableDrive power at 100/60% duty cycle: 78/87kWSpeed ranges: 2Speed range I: 10-501 rpmSpeed range II: 10-1750 rpmTorque I, 60% duty cycle: 8000 NmTorque II, 60% duty cycle: 2308 N ...

Auction-ID: A7-49229-87

CNC LATHE Inv. No. 12.710C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG16AC Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-49027-28

Auction-ID: A1-49382-37

Technical data Manufacturer: WEILER Model: Matador, according to the marking Design: conventional lead and tension spindle lathe Turning length: approx. 500 mm Turning height: approx. 160 mm Spindle passage: approx. 40 mm Dimensions: approx. 1,500 × 500 × 1,300 mm (L × W × H) Weight: approx. 600 kg Configuration Three-jaw chuck, tailstock, tool holder and integrated machine base with storage space. With visible accessories, including collets, interchangeable wheels, chuck jaws and other lathe accessories. Auction-ID: A7-49302-98

Auction-ID: A1-49382-21

turning diameter over bed - 570 mm, turning length - 1000 mm Auction-ID: A7-49398-34

Technical data Manufacturer: WEILER Type: UD 24 CNC Control: Siemens SINUMERIK RÖHM chuck, max. operating pressure 50 bar Configuration CNC Lathe Tool turret RÖHM Chuck Closed workspace Remarks The article comes from a company liquidation and was actively used in the training workshop until the company closed. Auction-ID: A7-49302-142

turning diameter: 580 mmturning length: 1040 mmSpindle Speed: 3.500 U/min.travel -x axis: 250 mmtravel -z axis: 1040 mmdiameter of quill: 85 mmweight of the machine ca.: 7200 kgdimensions: 4650 x 2320 x 2060 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 21i-TB Control x-axis: 390 mmz-axis: 780 mmspindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 mThe machine has chucks that can produce gears from 100 to 500 mm.Special chuck is availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 820 mmworkpiece weight max.: 2.000 kgturning speeds: 7,1 - 1.400 U/minLongitudinal Feed: 0,063 - 56 mmPlanar Feed: 0,05 - 28 mmTravel Distance Plan Slider: 520 mmTravel distance of the tailstock quill: 280 mmcenter height over square guideway: 400 mmbed width: 560 mmfaceplate diameter: 800 mmtotal power requirement: 30 kWMain Spindle: - Spindle head (DIN 55022): 11 - Camlock spindle head: 11 - Spindle bore diameter: 128 mm - Spindle diameter at the front bearing: 170 mmLead screw: - Pitch: 12 mm - Diameter: 54 mmCircumferential diameter over the long cross slide: 515 mmCircumferential diameter in the bed recess: 890 mmLength of the  ...

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.