presses for wood used for sale (313)

\"Motor power: 2.6 KW Pressing area: 2000 x 600 x 40 mm\" Auction-ID: A7-45983-56

\"Press length: 6000 mm Crimping height: 1300mm Crimping depth: 180 mm 12 stamps for alignment from the back 12 Stamps from Above Press pressure: up to 150 bar\" Auction-ID: A7-45983-44

\"Width: Approx. 1,200 mm Total height: approx. 3,000 mm Total installation depth: approx. 900 mm Guide tubes diameter 100 mm Cylinder stroke: approx. 700 mm Piston rod diameter: 70 mm Distance between cylinder guides: 350 mm\" Auction-ID: A7-45983-106

\"Height incl. table: 1900 mm Width 800 mm Depth: 500\" on pallet Auction-ID: A7-45983-126

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

Technical data: Number of press punches: 8 punches Press length: 4.00 m Press height: 1.20 m Press depth: 260 mm Auction-ID: A7-45983-9

work piece width: max ~ 100 mmworkpiece height: max ~ 100 mmcycle time: 4 secMitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction.The glue must be applied manually as the machine does not have a glue container.Operation: Foot switchPossible angles: 90°, 120°, 135°Machine without functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press pressure: max 104 tworking length: 3.090 mmWorking width: 4 x 240 mmSolid hydraulic molding or beam press Wemhöner type VS 4 S for veneering moldings, gluing wood or other pressing tasks.The press has four independently controllable pressing surfaces.Including dismantling and loading. Fixed loading date: 15.06.2026.Glue spreader also available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 350 mmworking length: 5.100 mmhollow: 210 mmSolid hydraulic beam press Bürkle type HS 1/90 35/510 for gluing timber, beams or other pressing tasks. Heating plates without function.Including replacement cylinders as good as new.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 750 mmworking length: 3.000 mmlength: ~ 3.850 mmwidth: ~1.000 mmheight: ~ 2.000 mmHydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-45833-317

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-45833-198

Technical data Machine Type: Press Manufacturer: TOX PRESSOTECHNIK GmbH & Co. KG Press Type: MAG 030.226.A.001 Serial Number: 315604 Drive: TOX Powerhouse S 30.113.140.12D-LF Pneumatic connection: G 3/4\" Electrical connection: 230 VAC Maximum pressing force: 170 kN (6 bar), 300 kN (10 bar) Minimum air pressure: 3 bar Maximum air pressure: 10 bar Stroke: 140 mm (total), 12 mm (power stroke) Ambient temperature: 10°C to 60°C Weight: approx. 1150 kg Year of Make: 2007 Configuration Control: STE 325-130-3/4 Compressed air: filtered and dried (max. 40 μm) Note: Powerhouse should be renewed Auction-ID: A1-45711-324

Used machine - completely overhauled - ready to use, no costs to be expected! BRIQUETTING PRESS Model No. E55 Year: 2010 Briquette diam. 55 mm, Engine kW 5.5 (High Efficiency). Production from 15 to 60 Kg/h. Dimensions: H 1.510 mm, 1.700 mm, 1.170 mm. Kg 600. Technical characteristics: Oleodynamic machine; No. 7 Cycles per minute approximately with the machine at full speed; 3 cylinders; 1 Monobloc vice; Maximum length of each expulsion 50 mm; 1 capacitive probe for working in automatic mode; 1 viewfinder; Ferrum diam. 1,000 mm. Capacity capacity ~ 0.73 m3; End-of-cycle device; Electronic pressure gauges, pump and vise; PLC Touch Screen Siemens; Siemens Display; hour meter; Inductive limit switches; Machine position control by LED; Stamping head; Preheating system; Oil and temperature level sensor; Current Stabilizer; Service keys; Voltage 400V – 50 Hz Standard Paint: Structure RAL  ...

Production: 30 to 60 kg/hBriquettes:Diameter: Ø 55 mmMotorization:Pump motor power: 5.5 kW / 7.5 HPPower supply: 380 V / 50 HzHydraulic:Briquette cylinder Ø 120 mmPushing power: approx. 700 kg/cm²Drawer cylinder Ø 40 mmMechanical elements:Cylindrical ferrule Ø 1,000 mmMachine dimensions:1,650 × 1,150 × 1,460 mmWeight: 830 kg Auction-ID: A1-45443-77

Machine: Briquetuse Briquette Ø: 50 mm Output: 30 - 50 kg/h (depending on material) Engine: 5.5 kW Voltage: 400 V, 3 Ph Consumption: 15 A Fuse protection: min. 16 A Cable cross-section: 6 mm² (≤10 m) Hydraulic power unit: capacity 100 L Weight: 700 kg Auction-ID: A1-45443-29

- Total installed power 1.50 KW. - Maximum work surface approx. 6000 x 1650 mm. - Maximum wood thickness approx. 80 mm. - 12 vertical hydraulic pressure clindros. - 8 front clamping bars of the parts with 2 pneumatic cylinders each. - Hydraulic group of 1.50 KW-1420 rpm. - Possibility to work in 2 zones independently. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-3

- Dimensions of the work table approx. 2200 x 1200 mm. - Maximum workpiece dimensions approx. 1950 x 1000 mm. - Perforations in the table every 60 mm in the 2 directions. - 5 positionable hydraulic clamping cylinders. - 1.50 KW-1400 rpm hydraulic pump. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-11

- Total installed power 1.80 KW. - 3 x 2 vertical pressure cylinders. - 2 x 2 horizontal pressure cylinders. - 2 independent work areas. - Maximum pressing dimensions approx. 2350 x 600 x 1200 mm. - Working pressure: 0-100 kg/cm². - Operating conditions of this machine: unchecked. - Dimensions for transport approximately XXXX x XXXX x XXXX mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-4

Plate dimensions: 2200 x 1100 mmDaylight opening: 350 mmNumber of daylights: 1 St.Heating: elektrisch Specific pressure: kg/cm²Total pressure: 65 toMotor output: 1,1 kWDimensions (L/W/H): 2540 x 1280 x 1900 mmweight of the machine ca.: 2500 kgYear: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2.800 mmwidth: 600 mmheight: 1.800 mmNumber of pressing cylinders: 6 Stk.work height max.: ca. 1.000 mmSolid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders.One cylinder without pressure shoe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 3.000 mmheight: 1.900 mmlength: 800 mmPneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mmTotal pressure: 400 toweight of the machine ca.: 12000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1550x2950 mmWeight: 4000 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mmWeight: 4000 kgTotal power requirement: 19,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x1620x2130 mmWeight: 5760 kgTotal power requirement: 32,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mmWeight: 7900 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mmWeight: 400 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.