lacquer machines used for sale (501)

can be loaded with forklift Auction-ID: A3-43525-11836

Dimensions (L/W/H): 2300 x 700 x 1300 mmAir consumption: 3500 m³/hMotor output: 1,5 kWweight of the machine ca.: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2394x990x3115 mmWeight: 0 kgTotal power requirement: 2,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1624x950x2345 mmWeight: 0 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at mach ...

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electric e ...

Usefull width: 1300 mmPanel thickness: 3 - 80 mmPanel feed by carpet, variable feedspeed 6-30 m/minCoating roller 55? Shore with variable speed and scraperChrome doctor roller with variable speed and scraperMachine length in the line: 1000 mm

Usefull width: 1350 mm.Max. pass: 6-80 mm.Working height 880-920 mmApplication rollers foam rubber 30? ShoreMembrane pump 4 kWincluding 2 spare rollers ( 1 is new )

ROLLER COATER with SINGLE SPREADING-COATING ROLLER- Max working width mm 1300- Lenght of the machine mm 1000 approx- Thickness of the panels (working height): mm 0 - 100- Adjustable feeding speed: m/min 4 - 23- Separate (from the machine s body) electric and command cabinet- Total installed power KW 2.4- Equipped with:- 1?) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37- 2?) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottomroller, counter-placed to the top one

Curtain coater for flat pieces2 coating heads, each with a pumpUsefull coating width: 1300 mmWorking heigth: 850 mm.Workpiece transport by interrupted belt 3xlength 3000 mmFeed speed 20 - 120 m/minpower 3,9 kW

Usefull width: 1300 mmPanel thickness: 3 - 80 mmPanel feed by carpet, variable feedspeed 6-30 m/minCoating roller 55? Shore with variable speed and scraperChrome doctor roller with variable speed and scraperMachine length in the line: 1000 mm

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Venyeskob, Type: Venspray Comfort, Year: 2017, Control: EPS CNC Liniensteuerung, Spraying line: yes, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350 - 2500, Min.-max. workpiece height in mm: 3 - 80, Belt conveyor: yes, work piece cleaning: yes, Spraying machine: Venspray Comfort, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 3, Laquer system - airless: Airmix, Lackrückgewinnung über Band: yes, Wäscheranlage: 1, by rollers: yes, Dry exhauster: yes, Werstückabmessung max:: 300-4000, Werstückabmessung max:: 300-4000, Jet dryers (number): 2, 2 UV lamps qty.: 3 D Trockner, Belt conveyors (number): 2, Jet dryers (number): 2, Feedin speed m/min: 3-5<CRLF>-, Year :2017

Manufacturer: Heesemann Cefla Türenlackieranlage, Type: Cefla Robot, Year: 2004, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, by rollers: yes, by scraper: yes, Dry exhauster: yes, Jet dryers (number): Hochtrockner, Sanding machines (number): 1, Brushing machine: no, Design sanding machine no 1: Querband/Längs/längs, Dust exhaust (number): yes, UV dryers - 3 lamps inclined (number): yes 120 Watt, Jet dryers (number): Hochtrockner, High dryers (number): 32, Length of pallets mm: 5500, Feedin speed m/min: 3-6, Year :2004

Manufacturer: Venyeskob Venspray Perfect, Type: Lackierstrasse mit Trocknung, Year: 2015, Control: Venyeskob/, Spraying line: yes, Work piece width min-max mm: 50-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Belt conveyor: yes, Dust exhaust (number): yes, work piece cleaning: yes, Spraying machine: Venspray Perfect, Farbmanagment: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Lackrückgewinnung über Band: yes, Wäscheranlage: 2 Stück, Dry exhauster: yes, Dust exhaust (number): yes, Year :2015

Manufacturer: Cefla-Sobini, Type: Spachtelwalze SP1, Year: 2003, Control: Sorbini, Operating side: links, Working hight mm: +/- 920, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 5 - 30, Gummierte Auftragswalze mm: ca 12, Gummiqualität : ca. 50 Shore, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Direktantrieb Glättwalze: yes, verchromte Glättwalze mm: yes, Auftragswalzenbreite mm: 1450, Dosierwalzenbreite mm: 1450, Glättewalzenbreite mm: 1450, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 3 - 80, Feeding speed min/max: 5 - 30, Roller lift out: yes, Hight adjustment by engine: yes, Carriage: yes, Anschluss für Betrieb in zentralgesteuerten Lackieranlagen: yes, Type of transportation: Band, Wight appr ...

Manufacturer: Cefla-Sobini, Type: Spachtelwalze SP1, Year: 2005, Control: Sorbini, Operating side: links, Working hight mm: +/- 920, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 5 - 30, Gummierte Auftragswalze mm: ca 12, Gummiqualität : ca. 50 Shore, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Direktantrieb Glättwalze: yes, verchromte Glättwalze mm: yes, Auftragswalzenbreite mm: 1450, Dosierwalzenbreite mm: 1450, Glättewalzenbreite mm: 1450, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 3 - 80, Feeding speed min/max: 5 - 30, Roller lift out: yes, Hight adjustment by engine: yes, Carriage: yes, Anschluss für Betrieb in zentralgesteuerten Lackieranlagen: yes, Type of transportation: Band, Wight appr ...