blow moulding machines used for sale

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

PET Stretch Blow Molding Machine 1-fold cavity Mileage: 20.2 million bottles Product-specific parts for the following threads: 24/ 410 25mm Snap On 28/ 410 28mm ROPP 38SP400 38mm 2-Start 38mm 3-Start 53SP400

A plastic blow molding machine from Apollo will be sold. Type ABLD 90th year 2019 For technical data, please refer to the Apollo Machinery homepage. Machine has run little due to restructuring and is therefore for sale. The plant is complete and can be put into operation immediately. The plant has been rebuilt for sale and can be tested. Price is net. The dismantling as well as the preloading onto a truck by an external company can be organized for 3000 euros net. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded. All information without guarantee. Visit us on TikTok & Instagram at neff_maschinenhandel

Extruder: 80 mm Year of Make: 1984 Overhauled: 2005 Control: Siemens S7 Blow head: 5 liter accu head equipped for the production of technical parts

Two injection blow molding machines for hollow body production are available. 1) Injection blow molding machine Kautex KB 15.10, year of manufacture: 1984, overhaul: 2005, stations: 1, nozzle diameter: 80mm, clamping force: approx. 250kN, opening stroke: 300mm/800mm, max. mold thickness: 2x160mm, max. mold dimensions X/Y: 950mm/600mm, control: Siemens S7, operating hours: approx. 96432h. 2) Injection blow molding machine Kautex KB 50/13-S, year of manufacture: 1983, overhaul: 2003, nozzle diameter: approx. 80mm, clamping force: approx. 410kN, plate dimensions X/Y: 700mm/900mm, mold thickness: 2x320mm, opening stroke: 600mm/1300mm, control: Siemens S7. Documentation available. On-site inspection is possible.

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefe ...

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Battery head 5.5 ltr, overhauled

overhauled battery head 5 ltr

new battery head

Clamping force 600 kN. Extruder 120/24D. Battery head 8 ltr. Strike plates 960 x 800 mm, opening path min/max 600/1300 mm. Mould thickness 620 mm. 380V 50 Hz

Clamping force 500 kN. Extruder 90/24D. Battery head 8 ltr. Strike plates 700 x 800 mm. Opening min/max 650/ 1200 mm. 380V 50Hz

Clamping force 300 kN. Extruder 70/24D. Battery head 3 ltr. Plate size 620 x 620 mm. Opening min/max 500/1050 mm. 380V 50Hz

Clamping force 400 kN. Extruder 90/24D. Battery head 6.3 ltr. Nozzle diameter 50 - 200 mm. Closing plates W x L x D = 800 x 1000 x 2x300 mm. Max. opening 1400 mm. Top and bottom blowing, needle blowing, interval blowing. hose strut and crimp. Butzendieze

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

Accumulation Head Capacity : 4 l // Number Of Heads: 1

Container Size With Actual Configuration: 2 l // Number Of Heads: 8

Container Size With Actual Configuration: 3,5 l // Number Of Heads: 1

Container Size With Actual Configuration: 5 l // Number Of Heads: 1

Container Size With Actual Configuration: 3 l // Number Of Heads: 2

Container Size With Actual Configuration: 250 ml // Number Of Heads: 1

Maximum Diameter: 500 mm // Minimum Diameter: 200 mm

Nissei ASB 150 DPW injection stretch blow moulding machine. The system included: - Nissei ASB 150 DPW - Mould Dryer, Matsui - Resin Dryer, Matsui - Hopper, Moulds for jars