- Manufacturer: Bianchi Casseforme, Italy - Vehicle type: self-propelled / mobile concrete spreader - Application: Concrete distribution / precast concrete production - Year of manufacture: unknown - Type / Model: unknown - Operating hours: unreadable / unknown - Operating hours display not available due to previous conversions or renovations - Large concrete feed hopper - 2 vibrators / vibrators on the upper filling area - Discharge/distribution unit swivels - Travel drive available - Exhaust system overhauled - Rear view camera available and functional - Lighting/lighting system functional - Rotating beacon available - Exterior mirrors available - Control station with driver's seat and steering wheel - Hydraulic system / components available - Vehicle ready to drive - Machine ready for operation / functional - Signs of wear and tear due to age and use - Partially visible paint chipping ...

Saucer mixer 400 Volts Auction-ID: A1-50663-1346

Including various, in and including 1x plastic stacking box Auction-ID: A1-50889-133

Plot has been tested for operation Auction-ID: A1-40164-155

Plot has been tested for operation Auction-ID: A1-40164-156

Size 120x70x115 cm. Auction-ID: A1-50656-143

Auction-ID: A1-50340-52

Mobile Wheel Screening Plant Powerscreen Chieftain 8 x 4 = Manufacturer Powerscreen mobile screening system on wheels, mobile, semi-trailer Screen dimensions 2,438 x 1,219 mm Screen Box: Double Decker Eccentric Screen Box Throughput: approx. 80 - 100 t/h

Aerated concrete plant complete for 60,000 m³ per year

Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system

Impact crusher 8/4/3 S3 Infeed width 480 mm Inlet height 400 mm Maximum feed up to 250 mm hard rock Capacity up to 60 t/h depending on gap setting Drive power 45 - 90 kW The machine has completely new wear parts The rotor is overhauled with new blow bars Includes hydraulic power unit for swingarms and housing Basic machine with infeed hopper

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

Split sieve coverings for an IFE dewatering screening machine 1 pcs L 500 mm x W 800 mm gap 0.3mm 1 pcs L 1000 mm x W 800mm gap 0.3 mm 2 pcs L1000mm x W 800 mm gap 0.3 mm 3 pcs L1000mm x W 800 mm gap 0.3 mm 5 pcs L1000mm x W 800 mm gap 0.3 mm The pads are unused or only in use for a short time

Screening machine large, Terra St used, overhauled

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Four nearly new moulds for garden wall and fence.

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of ...

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

TECHNICAL SPECIFICATIONS Description: Land conveyor belt system Wheelbase: 91,000 mm Strip width: 650 mm Drive power: 15 kW Drive type: V-belt Conveying capacity: approx. 180 t/h Discharge height: approx. 1,500 mm Handover: Transfer hood Belt tension: tension slide Top Strap Cover: No Galvanized version: no Segment length: 6,000 mm

TECHNICAL SPECIFICATIONS Manufacturer: GfA Description: Sand trap Type: SF 2550 Year of Make: 1992 Drive power: 5.5 kW (SEW-Eurodrive) Bucket wheel diameter 2,500 mm Bucket width: 450 mm Number of buckets: 13 pcs. Trough length: approx. 5,000 mm Overall dimensions: 3,200 x 6,500 x 2,700 mm Incl. GfA dewatering strainer Type: ESU 1020 Year of Make: 1992 2 x Friedrich unbalance motors à 1.0 KW

TECHNICAL SPECIFICATIONS Description: Haldenband Design: stationary, swivelling Wheelbase: 34,000 mm Strip width: 650 mm Drive power: 11 kW Conveying capacity: approx. 180 t/h Drive type: V-belt drive Idler rollers: 3-part trough stations (Obertrum) Support: V-Column Catwalk: single-sided Handover: Baffle plate Belt tension: tension slide Drive drum: 450 mm Tensioning drum: 350 mm Top Strap Cover: No Galvanized version: no

TECHNICAL SPECIFICATIONS Manufacturer: Bräuer GmbH Description: Vibratory conveyor trough Type: ZT1500/2700 Year of Make: 1998 Number of unbalance motors: 2 pcs. Drive power: 2 x 1.70 kW (Fabr. Friedrich) Speed: 980 rpm Channel width: 1,500 mm Channel length: 2,700 mm

TECHNICAL SPECIFICATIONS Manufacturer: SBM Description: Sand trap Type: SF 25-10L Year of construction: approx. 2007 Feed grain class: 0 - 5 mm Max. feed size: 15 x 5 x 5 mm Feed capacity dry material: 85 t/h Feed capacity water: 250 cbm/h Typical products: 0 - 2 mm, 0 - 4 mm, 0 - 5 mm Overflow edge: 4,800 mm Number of cups: 10 pcs. Wheel diameter: 2,500 mm Wheel width: 1,000 mm Trough width: 2,700 mm Trough length: 6,400 mm Speed: 0.6 - 1.2 rpm Weight: 9,500 kg Drive power: 4 kW Transport dimensions (length/width/height): 7,712 x 2,700 x 2,800 mm SPECIFIC COMMENT - High efficiency with minimal energy consumption - Clean product qualities - Robust & durable - Excellent dewatering and reliable application of high-purity sand fractions

TECHNICAL SPECIFICATIONS Manufacturer: SBM Mineral Processing Description: Reversible impact crusher Type: SMR 10/5/4 (SMR-1) Year of Make: 2007 Drive power: 110 kW Throughput capacity: max. approx. 80 t/h (depending on feed material) Maximum feed size: 10 to 150 mm Target grain size: 0 - 32 mm Rotor diameter: 1,000 mm Crusher inlet: 260 x 520 mm Number of blow bars: 4 pcs. Weight (crusher): approx. 8,500 kg Feed chute: SBM type FRLM 5/15 Nominal width: 500 mm Nominal length: 1,500 mm Drive power: 11 kW SPECIFIC COMMENT - Incl. drive motor 110 kW - Incl. steel construction and outlet tray

ID3851 Kleemann Mobiscreen MS21 Bivitec year/Baujahr 2019 approx. 2.100 hours/hours 37.5 t Coarse screening plant with flip-flow screen box, 3 screen fractions, screening concept: coarse screen (top deck) + flip-flow screen (bottom deck), throughput capacity up to 500 t/h, top deck – screen area: 11 m², cut size: 25x25 mm; 35x35 mm; 50x50 mm, bottom deck (flip-flow, self-cleaning) – screen area: 10 m², cut size: 3.5x3.5 mm; 4x19 mm; 8x8 mm, wired and radio remote control, including various screen liners. This is an extremely high-performance combination of a coarse-particle screen (upper deck) and a tension shaft (lower deck). The tensioned shaft is particularly well suited to fine separation cuts (e.g. 2 mm) with damp material, where conventional screening technology no longer works. Thanks to the tensioned shaft technology, the screen mats clean themselves and therefore do ...

TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Designation: Fine sand scoop wheel Design: extended settling trough Type: FS2709BL75 Year of Make: 1994 Solids discharge capacity: approx. 16 cbm/h (25 - 30 t/h) Mixture/water throughput: max. 150 to 200 cbm/h Drive power: 2.2 kW Drive type: electric drive with attached reduction gear Output speed: 3.06 rpm Wheel diameter: 2,700 mm Wheel width: 900 mm Trough length: 7,500 mm Trough length: 2,870 mm Weight: 9,100 kg SPECIFIC COMMENT - Fully functional and ready to use - Main area of application: fine sand with a grain size of 0 - 1 mm and 0 - 2 mm - Proven, extremely robust mechanical engineering quality - Extended calming trough - Low-wear gentle operation

TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Description: Drainage bucket wheel Type: E 200 S Year of manufacture: 1970 (overhauled 1993) Diameter scoop wheel: 4,950 mm Cup width: 900 mm Number of cups: 22 pcs. Throughput: 120 to 150 t/h Drive power: 5.5 kW Gearbox type: STIEBEL flat head gearbox type S19 Total length of tray: 7,000 mm Total width of tray: approx. 4,500 mm Overall height: 5,440 mm Weight: approx. 17 to.

TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Description: Drainage bucket wheel Type: E 200 S Year of manufacture: 1970 (overhauled 1993) Diameter scoop wheel: 4,950 mm Cup width: 900 mm Number of cups: 22 pcs. Throughput: 120 to 150 t/h Drive power: 5.5 kW Gearbox type: STIEBEL flat head gearbox type S19 Total length of tray: 7,000 mm Total width of tray: approx. 4,500 mm Overall height: 5,440 mm Weight: approx. 17 to.