215 Mixers used for sale

Used stainless steel 30 L vacuum mixer with planetary dispersing agitator. Manufacturer: Miralles, model: MPV DV30.

Mixing plant (urea machine - AdBlue) - (with accessories)

Used ribbon mixer made by Jensen, capacity: 6000 liters.

Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.

Batch mixers, used Manufacturer : Drais Volume : 300 ltr. Material : Areas in contact with the product in stainless steel Spur gearbox drive : 7.5 KW; Other equipment : - 1 x cutter head with air flushing, drive : 4 KW; - Control cabinet, incl. frequency converter, as well as with all necessary switching and protective devices; - Circuit diagrams available.

Stock# U2470-1 Used stainless steel contact parts sigma blade double arm mixer by NAGEMA (Germany) type DMK 400. Working capacity 400 l and total capacity 550 l. Internal dimensions of mixing chamber 885 mm wide x 1005 mm long x 660 mm deep. Mixer has a carbon steel heating/cooling jacket with a capacity of 38 liters, designed to work at a pressure up to 2.5 bar and a temperature up to 138 C deg. Stainless steel SIGMA-type agitators are driven by a gearbox and an electric motor with a power of 15 kW, 730 rpm, 50 Hz. Tilt unloading is driven by a gearbox and an electric motor with a power of 1.1 kW. Stainless steel cover is opened by a gearbox and an electric motor with a power of 0,18 KW, 220/380 V, 50 Hz. Includes control panel. Shipping dimensions of mixer: length 3150 mm x width 1400 mm x height 2000 mm, weight 3625 kg.

Used twin-screw mixer made by Müllner & LUX KG, type LM 40. New 1990. Two motors 7,5 kW.

Used Ulbricht ML300VC meat mixer. Capacity 300 liters. Technical data: - Height: 2000 mm, - Width: 1950 mm, - Length: 1100 mm, - Weight: 380 kg, - Capacity: 300 l, - Electrical voltage: 400 V 50 Hz 3N, - Installed power: 3.8 kW, - Stainless steel, - With integrated cooling unit.

Used equalizer, capacity 4000 liters. - slow-speed agitator - power – 7.5 KW - diameter – 214 cm outside/198 cm inside - tank height – 212 cm, cover – 210 cm

Used tank with anchor agitator, capacity 300 liters. Water jacket heated by heaters. Made of stainless steel. Electric drive with gear motor. Control cabinet.

PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)

Mixing tank 900L

2 pcs 800L mixer with heating and control

Mixer

Mixing and homogenizing plant 300L, incl. heating and cooling, as good as new, never been in operation

Mixing and homogenizing plant 60L

Laboratory Mixer 25L

Mobile mixing and homogenizing plant capacity 334L

Powder mixer, price for both EURO 15,000,--

Mixing and homogenizing plant 300L

Agitator 0.37 KW with aluminium propeller 300 mm Electric motor: Electric motor 0.37 KW, 3 x 230/400 volts, n = 1400 rpm, Weight approx. 15 kg. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material: Stainless steel 1.4301. Stirring organ: Used double-bladed aluminum propeller d = 300 mm.

Dinnissen Double shaft Twin mixer. 10.000liter Year 2016. Spare parts like 2x complete paddles and 2 extra gears is available

Silo lung mixer with large capacity auger and hydraulic group. Ideal for plastic recycling, extrusion or storage. Capacity: 10,000 litres Integrated auger discharge Hydraulic unit: 5.5 hp (4 kW) With pressure regulator and pressure gauge Oil cooling heat exchanger Hydraulic tank: 80 litres

Used stainless steel cube mixer, made by Paasch, type: F 31. Total capacity 3500 liters.

Used dissolver made by Teja, type: MW-4. The MW-4 type dissolver, is used in the paint and varnish industry to mix pigment pastes in typical transfer vats with a capacity of 250 to 1000 dm3.

Continuous ploughshare mixer, used Type : KM 600 DW Brand: Lödige Material : Areas in contact with the product in stainless steel Volume : 600 ltr. --> 2 x Knife Head

Used homogenizer made by Brogli + CIE Basel Switzerland, type: MH 500 B, capacity: 500 liters with heating jacket, frame mixer, teflon scrapers, dispersing mixer and comb homogenizer.

Used plastic agglomerator, model GHX 300. New: 2021. Technical data: - Capacity 300 liters, - Recommended feed 200 liters, - Efficiency 220 kg/h (PE / PP PET / PA films), - Automatic or manual water supply, - 75 KW engine, - Installed set of six sets of fixed knives, - Rotating arm with double-sided knives, - Knife material 9 CrSi, - Pneumatic agglomerate discharge with the possibility of setting in automatic or manual mode, - Good condition / Used for only one year.

Used stainless steel egalizer, capacity: 1500 liters.

Used stainles steel mixer with dispersing agitator, capacity: 3000 liters.

Used stationary dissolver made by Teja, type: DDZ-90-7.5/2000, capacity: 2000 liters. Dissolver equipped with cooling jacket, anchor mixer with scrapers and dispersing mixer. Acid-resistant execution. Motor power 90 kW.

Sanco Dosing Installation, Year of Manufacture: 2018 Consisting of: - 2x insulated 1200-liter tanks with manhole and agitator - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. We are happy to assist you further upon serious interest in this installation.

CHARLES ROSS Mixer HSM-100LH2 High Speed HSM-100LH-2 Control mc series AC Tech with enclosure hydraulic control HIGHSHEAR MIXER Equipment has been excellently maintained. Partly with spare blades You buy a device here View more product information here More items - new and used - can be found in our shop! International shipping costs on request!

REITZ RW40300400 agitator for tank containers 4.0 KW / 300 rpm and inclined blade stirrer Worm gear motor IE3: Three-phase motor Moll 3 x 230/400 Volt, 4.0kW, IP55, n1 = 1440 rpm, n2 = 300 rpm, worm gear, i = 1:5, plug-in shaft as output shaft D = 28 mm. 5 m cable and motor protection plug. Shaft: Precision stainless steel shaft D30, length 2000 mm, diameter 30 mm, Material: stainless steel. With 2 x 1000 mm pitch and additional rigid coupling. Coupling: 2 pieces rigid coupling, 1x 28/30, 1x 30/30 mm, material stainless steel Agitator: 2 pieces of double-bladed oblique blade stirrers, diameter 400 mm, material stainless steel 1.4571, welded version. Truss: With 1 piece mounting frame approx. 400 mm x 2600 mm Each longitudinal strut 2600 mm consists of 2 mounting rails 41 x 82 mm profile. With diagonal struts and angles for fixation on tank frames. Frequenc ...

Laboratory Ploughshare Table, Demonstration Machine Volume : 10 ltr. Material : Areas in contact with the product in stainless steel

Pharma mixer for mixing, granulating, and chopping powders and liquid mixtures, for batch sizes in wet granulation up to max. 100 kg, with a total volume of 250L. The mixer was completely overhauled in 2012.

Ploughshare mixer, used Type : PSM 200 / 1 MK Manufacturer : MINOX Maschinenhandels GmbH Volume : 200 ltr. Material : Areas in contact with the product in stainless steel Drive : 2.2 KW 1 x cutter head : 3000 rpm --> incl. control cabinet and base frame

Used pressure tank made by Urlinski, type: ZB 50 PF. New 2020. Working capacity: 50 liters Intended use: The ZB 50 PF-type mobile tank, vacuum-tight, designed for hygienic storage and transportation of pharmaceutical and cosmetic products of the second group of liquid classification (safe liquids). Technical data: -TYPE: ZB 50 PF -Working tank capacity: 50 liters, -Total tank capacity: 70 liters, -Grade of steel in contact with the product: 1.4404, -Tank inner diameter: 400 mm, -Fastener sealing material: VMQ, -Capacity: 56 kg, -Height: +/- 1300 mm, -Height with lid open: +/- 1420 mm, -Length: +/- 610 mm, -Length with open lid: +/- 940 mm, -Width: +/- 530 mm, -Drain spigot height from the ground: +/- 300 mm, -Surface area in contact with the product: 0.84 m2.

Material : Areas in contact with the product in stainless steel Year of construction : 2014 Volume : 750 ltr. Drive : 45 KW

Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device  ...

Stirring value as good as new (was not yet in use) Fabr. RVT; 2.2 KW n=1,420 1/min

-with mobile mixing tank MBF500 /RF and tilting device KV 1000 -Working volume: 100 to max. 500 litres -Gross volume: 550 liters -Max. pressure: pressureless -Weight: approx. 2.4 tons -Control voltage: 230V/50Hz

Used 500 l capacity stainless steel mixer. Two agitators: - slow rotary (frame) 30 rpm Mixer speed adjustable as required. - fast-rotating (propeller) 1380 rpm. Installation and control for circulating pump.

Used cutter manufactured by Nowicki model KS B110 type 276 MM. New 2008. Zinastalled power 18.5 kW. Power supply 3x400V/50Hz. Max current 45A. Weight 500kg. Material - stainless steel.

Used mixer MK300

Planetary Mixer Autumn HRV-S 2-7 Power 1.5 kW Speed adjustable via frequency converter with control cabinet Wall scrapers Vacuum pump mounted on stainless steel plate Very good condition, straight from production

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Pelletizing Mixing Conditioner Pellet Mill Amandus Kahl Diameter 400 mm, length 2500 mm, stainless steel, as good as new

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer  ...