machines and plants for waste disposal and recycling used for sale (1,290)

used Actini Effluent treatment Skids. Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.

used Beel Industrial Boilers 10 bars Waste Heat Recovery. UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

used Piferoen 5H. Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.

used Sant Andrea Novara 40/750. AG

used TECNOECOLOGY Junior 25. AGICOM Recycling Machine Trade The Junior 25 cable peeler is a compact tabletop device. The machine is ideally suited for extracting copper from the thinnest electrical cables (with rubber or PVC jacket). Peeling range: 2 to 28 mm Cutting speed: approx. 25m/min. Power consumption: 220V/440Watt Dimensions: 450x500x500 mm Easy adjustment and operation, Cutting Unit: Two-Knife System Weight approx. 50 kg; Year of construction 2020

used TECNOECOLOGY TR 250. AGICOM Recycling Machines

used JMC Mcintyre JMC 500 GT. AGICOM Recycling Machines Very powerful and high-quality alligator shears with a cutting force of up to 90 tons. The scissor head is operated with a foot pedal for individual cuts or continuous cutting and is protected by a safety cage. Cutting force: 90 tons Knife length: 508 mm Max. knife opening: approx. 250 mm Drive: 7.5 kW/380 V Overall dimensions: 1370 x 720 x 1280 mm Total weight: approx. 1020 kg Drive: 7.5 kw / 380 V Number of strokes at full opening: 16 / min Operation: Foot pedal; Machine on wheels Operating instructions in German CE Declaration of Conformity Spare parts available

used TECNOECOLOGY SRL TG500. AGICOM Recycling Machines

used Sant Andrea Novara 40/750. AGICOM recycling machines

used EMILOS 1200 Ecosystem. AGICOM recycling machines: Used vibratory screen 1200 ECOSYSTEM, overhauled by the manufacturer. Working diameter approx. 1200 mm. Perforated screen thickness: 0.800 mm Completely made of stainless steel Icon Video

used TECNOECOLOGY Maxi 100. AGICOM Recycling Machine Trade The powerful and robust MAXI 100 cable peeling machine is ideal for processing cables with a diameter of 6 to a maximum of 90 mm. How do you peel cables? The two-knife system cuts open the cable insulation, and the copper or aluminum core can be easily removed. The cable peeling machine can be infinitely adjusted to all cable diameters via a hand crank. The cutting depth of the blades (cable sheath) is also adjustable and thus enables the processing of a wide variety of cable types (e.g. triangular wires made of high-voltage cables, cables with lead sheath ...) All-round intrusion protection CE Declaration of Conformity Manual in German Spare parts available! Cable diameter: 6 to 90 mm Number of blades: 2 Cutting speed: approx. 22 m/min Drive: 2 electric motors, 2 x 1.1 kW / 380V 50 Hz Dimensions: L 1850  ...

used IRS SRL EASY 180. AGICOM Recycling Machine Trade The Easy 180 cable pelletizing system is the ideal entry-level model for professional cable recycling. This one-man machine is thrown in by hand. Pre-shredded cable material or uncut cables are thrown in. The Easy cable pelletizing system is very robust, powerful and delivers the best results from old and residual cables. The machine is characterized by: Compact design Low space requirement Easy to use Low energy consumption Operating instructions in German Spare parts (knives, perforated sieves) available Technical data Feed material: Electrical cable without impurities Throughput capacity: up to 180 kg/h Drive: 8.5 kW Weight: approx. 1200 kg Dimensions: approx. 1700 x 1300 x 2100 mm

used Goudsmit Magnetic Systems Eddy Current REC-08. AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit. The Eddy Current non-ferrous separator is intended for the separation and recovery of non-ferromagnetic metals (e.g. aluminium and copper) from non-adherent material streams. The separation process of the Eddy Current non-ferrous separator is based on the so-called "eddy current principle". When electrically conductive materials are exposed to a rapidly changing magnetic field, current is induced. Such eddy currents create a magnetic field that is opposed to the changing magnetic field of the magnetic roller (the output magnet). Electrically conductive particles passed over such a magnetic roller are therefore repelled by the changing magnetic field. The non-electrically conductive materials fall off after passing through the magnetic roller.  ...

used Goudsmit Magnetics Eddy. AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit

used ISVE MR2260. AGICOM recycling machines: The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Year of Make: 2019 Machine in good condition and ready for immediate use!

used ISVE MR2260. AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the eve ...

used Stautmann MK 1100/3. 3 Chamber Press – Waste Press Strautmann MK 1100 used Features • Manufacturer: Strautmann • Type: MK 1100/3 • Condition: Used goods, see photos • Colour: Green • Dimensions: 3600 x 1000 x 2700 mm • Net weight: 2000 kg • Connection: 4 kW, 400 V, 50 Hz • Press force: 200 kN • Year of manufacture: 2000 Price € 4.900,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

used ARBOGA nb. Chip Receycling Plant System Arboga / Sweden

used PAWERT SPM I 90/200. For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presum ...

used KASU VACUMET Vacuum device. Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.

used LIM CP 1100. Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg

used diverse diverse Fabric slider. Fabric sliders: o Various nominal diameters available o Versions: Mechanical and pneumatic o Robust and durable for industrial applications Knob: o Precise control of flow rates o Choice of mechanical or pneumatic Condition: Mint

used JMC McIntyre JMC 150. AGICOM recycling machine trade: Small alligator shears JMC 150 overhauled by the manufacturer, benchtop device, ready for immediate use! Manufacturer: Mc Intyre Knife length: 150 mm Knife opening: 105 mm Cutting capacity: 25 tons Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

used LINDNER VEGA 1500. Shredder with external feed, metal separator, etc. very good condition, many spare parts, immediately ready for use!

used TECNOECOLOGY T150. Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

used HOLMATRO Mobile. Recycling machine trade AGICOM-Pedergnana OG: The battery-powered cutter has been specially designed for applications where more freedom of movement is required, to carry out cutting operations in hard-to-reach places or when it is important that the cutter must be ready for use in standby mode in case of emergency. Battery-powered cutters are made of high-quality aluminum. The HOLMATRO cutter model ICU 10 A 10 is particularly suitable for cutting telephone cables, underground cables, electrical cables and steel cables. Specifications: Maximum cutting force: approx. 242 kN, approx. 24.7 tons Maximum opening width: 115 mm Maximum operating pressure: approx. 500 bar Dimensions: L 737 x W 222 x H 177 mm Weight: 17.3 kg

used Maskin AB Rapid 205 Kurf. Edge strip shredder for edge trimming plastic films.

used PADBERG GZ 500 Spaen centrifuge. Zentrifuge Cepa Padberg GZ 500, BJ. 1994,approx. 100 kg per batch, 750 rpm Next: CEPA Padberg GZ 500 E, BJ 1994, with 125 kg swivel crane VETTER See pictures below

used voran Maschinen GmbH Compost professional. Engine power 4.0 (5.45) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 880 mm width 735 mm Height 1540 mm Weight 70 kg material Steel painted Hoehe ejection in 450 mm ; New machine - best condition

used voran Maschinen GmbH BG2-5,5kW BIO Universal Shredder BG2-5.5kW. - 1 outlet nominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition

used voran Maschinen GmbH BG3-11kW BIO Universal Shredder BG3-11kW. Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition

used RUF + Co RUF 5.5/3700/60X40. For sale is a RUF 5.5/83700 with 60x40mm briquette size used for steel. Machine is in very good condition. Power requirement is 400V AC 11kW 32Amp. Control system is Siemen's S7-200

used Erema SW8 470 P/T. Erema SW8 470 P/T Plastic Recycling / Re-granulation Line Year: 1999 Make: Erema Model: SW8 470 P/T Erema Recycling Line • Make: EREMA • Type: SW8 470 P/T • Year of Manufacture: 1999 • Serial Number: C997043 • Weight: 3350 kg Technical Specifications • Designed for plastic film recycling and re-granulation • Includes extruder, cutter/compactor section, and downstream pelletizing equipment • Electrically driven system with integrated process control panel • Complete line as shown in photos Features & Equipment • Control cabinet with touchscreen interface • Feeding and cutting section with integrated motors • Vibratory cooling and pellet separation trays • Heavy-duty construction suitable for continuous industrial operation

used BOREMA. TECHNICAL SPECIFICATIONS Manufacturer: BOREMA Umwelttechnik AG Description: Manual sorting system Version: with feed hopper, conveyor technology, overbelt magnet Year of construction: 2024 Material: KVA pre-sorted, combustible waste Feed size: approx. 0-500 mm Required capacity: approx. 5.0 t/h FACILITY CONSISTS OF: 01) Vibratory Conveyor SFLU Dimensions (LxWxH): 5,000 x 800 x 250 mm Hopper volume: approx. 5 cbm 02) Climbing Tape FB Conveyor belt length: 3,000 mm Conveyor belt width: 1,000 mm Inclination: approx. 20° Drive power: 3 kW Rubber Belt: Supergrip 03) Permanent overbelt magnetic separator IMP Z-120 Material: magnetic FE metals Drive power: 2.2 KW, 400 V, 50 Hz 04) Sliding belt conveyor FB, manual harvest Conveyor belt length: 6,500 mm Conveyor belt width: 1,000 mm Drive power: 3 kW Hand sorting area: Lining with wood 05) Sw ...

used EREMA SW 4/134 RTF. EREMA flush filter with partial flush back. SW 4/134 RTF

used NGR C-GRAN085-110VSP. Single-screw regranulation plant NGR Technical details: • Screw diameter : 85 mm • Production capacity: 500 kg/h • Screw L/D ratio: 21 • Degassing system: Yes • Engine power: 90 kW • Nozzle Type: Spaghetti • Suitable for (material) processing: PET,PE • Recently recycled material: PET • Suitable Material Form: Film Flakes, Trims • Use of the product: Sheet • SCREEN CHANGER: BSC160 Back-flushing screen changer • Screen Changer Type: Automatic Other specifications: Recycling machine for PET (non-food safe) and PE Material Output: PET/PE printed films (12pm PET + 30pm PE) Origin: Post-Industrial, Moisture: Dry (

used YEI YDN-V160. Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.

used Enerpac. Scrap scissors hydraulic with petrol engine

used Kongskilde OK-100 SKOD Dust removal system. Unused. New.

used Rapid Gestell für Zyklon rack for cyclone. New. Unused. Adjustable. Dismantled. Inner diameter passage: 155 mm Total height: 190 cm