peripheral equipment (e.g. heating,cooling,drying) used for sale

5 PCS AVAILABLE BRAND FRIGEL MANUFACTURED 2007 CONDITION USED - IN WORKING ORDER QUANTITY AVAILABLE 5 UNITS MODEL RCD180/24 (180 LTS PER HOUR) TEMPERATURE RANGE 23 TO 194 F (CELCIUS -5 TO 90) VOLTAGE 400 VOLTS FREQUENCY 50HZ SHIPPIING WEIGHT 395.00 Kgs MAX CURRENT 52 AMP FLUID H20 MAX PRESSURE 8 BAR REFRIGERANT R407C HIGH PRESSURE 27 BAR LOW PRESSURE 22 BAR abc.FRIGEL.IT

Pressing force: 120 tons. Oil volume flow (Q max): 130l/min Hydraulic pressure (P max): 210 bar Power supply: 400 V Auction-ID: A7-38912

working temperature: 30 °cooling capacity: 7,4 kWfill weight: 1,82 kgoperating pressure: 20/8,6 barvolume capacity: 9,44 Kubikmeter/hvolume capacity: 2900 pro Min.volume capacity: 28,5 barweight of the machine ca.: 160 kgdimensions: 675 x 835 x 1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gravimetry ConPro for Processing of up to 4 components Total capacity: approx. 300 kg/h GraviCon Type PP45-400/l – Basic Version Control terminal with 5'' colour screen (touch screen) Desk housing with stand Dimensions: H 430 mm x D 235 mm x W 245/340 mm 2 x hopper scale I-KTW F36 for components 1 + 2 Throughput: up to 250 kg/h (especially for fibrous materials and poorly free-flowing materials) Base frame Hopper without viewing window Load cell holder with platform load cell 2 x hopper scale I-KTW P3 for components 3 + 4 Throughput: up to 70 kg/h (for paint or aditive in powder form) Base frame Hopper without viewing window Load cell holder with platform load cell 2 x dosing unit type CP22 for components 3 + 4 with 1 set of screws and barrels each – version: 10/18 (min. 1 to max. 20 kg/h) incl. 2 x spec. Neckpiece incl. 2 x storage container type: VB1 ...

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. ...

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

Surface treatment of plastic films by flame treatment to increase surface tension Field of application: Plastic films Machine unit existing main components • PSA Reversible Unwinding & Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice Comm. 2011-001.1 • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system Marking of defects • GWK temperature control units for roller cooling

Plant number 701-246; medium used radionuclide Krypton 85 Type: X1114 Specifications: Connection voltage: 40V +/- 10%, 3 phases, 50 Hz, N, PE Basis weight measurement: measuring range 30-600 μm PA; Measurement accuracy +/- 2; Sigma range (+/-0.4% but maximum +/- 0.4 μm), Measuring gap 10 mm Traverse: maximum useful width 1970 mm, traverse speed 0-10 m/min Ambient temperature: sensors 0-50°C, traverse 0-50°C, control cabinet (control) 10-35°C Humidity max. 90% without condensation

Both filling stations are in good condition, little in use.

Connected load: 0.77 kW

Motan conveyor incl. rotary wing level monitoring

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2 ...

Control System: Touch-screen operator panel Operation: Automatic color mixing and dosing Components of the Machine - Touch-screen control panel (CMA Challenger 151) - Integrated dosing & mixing system - Agitator / stirring unit (working components for mixing) - Pneumatic system / pressure control (pressure gauge and pneumatic connections) - Quick-release connections for tools/stirrers - Recipe management software (AURORA MIX / formula control system or equivalent), with integration into color-matching systems.

Single TL 1-12-B10/20-TKN6 Water Temperature Control System Applications: • Temperature control in plastics processing • Tool and mould making •Chemical industry • Testing and laboratory applications Temperature range up to 90 °C Max. external volume 61 l Heating capacity 12 / 18 / 24 kW Cooling capacity 35 kW (20 °C flow) / 100 kW (15 °C cooling water) Max. flow rate 200 l/min Max. delivery pressure 3.8 bar Pump motor power 3.0 kW Connections circulating medium G 11/4" Connections cooling water hose 18 mm Dimensions (L × W × H) 690 × 400 × 880 mm Weight approx. 75 kg Heat transfer medium water For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Colortronic CTT 30 Granulate Dryer For climate- and air-independent drying of thermoplastic granules and regrind before processing in order to remove the remaining moisture from the inside and outside of the granules. Colortronic dry air dryers work according to the absorption principle. The air is not heated, but the moisture in the drying funnel is absorbed and extracted. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: battenfeld-cincinnati, Type: pullStream R500-6E, Year of manufacture/first registration: 2015, Identification No.: 3801770-120, Pipe diameter range 70-500 mm, 6 tension straps á 0.55 kW, speed 01-5 m/min, max. pulling force 300,000N, weight 4.85 t

Laser welding system Föhrenbach

2 x Alpha 18 W-S with integrated redundant pump station Standard Hyfra equipment: Frame construction in stainless steel Economical low-noise scroll compressors Pump built into the housing; Attention: Required Inlet pressure: at least 0.05 bar! Machine with control transformer, no neutral conductor necessary Flow monitors Antifreeze monitoring Fault message with digital display Collective fault message, potential-free External power-on Automatic fan switching from low to high speed Highly efficient condenser with Micro Channel technology Non-cleanable flap evaporators for water Extras: Cooling capacity approx. 25kW at +13°C tank temperature and ambient temperature of +32°C Medium: Water Water-bearing pipes insulated Radiator designed according to the current ECO Design guideline 2021 (adapted compressor, condenser, evaporator) Housing LxWxH 1640 x 71 ...

System Cooler ERS

Pad printing machine Tampocolor TC60-80

Handling / Robot Wittmann W 811 BJ 2011

Key data: 160 °C

Description 1pc 800.--2 pieces 1.500.-- +VAT.HB Therm HB 160U1 max-160°C 8 KW ,year 2000 from resolution plastic production of medical device manufacturer ,operating instructions in the device in special compartment R1329 and R1330our identification no. Display protected by fold-away film Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

Dimensions of the short angle conveyor belts: L1: 1000mm L2:700 mm W: 300mm Driver height: 30mm + Dimensions of the longer angle conveyor belts: L1: 1800 mm L2: 1200 mm W:450 mm

KM Silcostar 922A BJ 2007

Wittmann Robot W813 BJ 2011

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 2200 ...

Age 1999 Consisting of :, 2 x Color Base Print Unit Automatic Elevator Tray Feeder Auto-Conveyor to Main Print Unit Universal Screw Denester ARCOTEC CG30-2 Corona Pretreater, with Leak Tester for the Tub Side Walls & Base 20 kW UV Curing Tunnel for the Tub Side Walls & Base, Precision Counter/ Stacker Unit Print Roller self cleaning function. Central Operator Control Panel. Modern PLC controls. Max. Dimensions of Tub: 110 x 150 mm (with 6 Mandrels) Max. Dimensions of Tub: 135 x 180 mm (with 3 Mandrels) Max. Printing Length: 400 mm (with 6-Mandrels & 4-Sectors) Max. Printing Length: 480 mm (with 3-Mandrels & 2-Sectors) Max. Taper: 12° Max. Height of Tubs: 130 mm Max. Print Height: 125 mm Max. Printing Speed: 150 tubs/ min (depending on size & shape of Tubs) Power Rating: 400 V, 3-Phase, 50 Hz, 35 kW, Tub dimensions: 135 x 180 mm max., Max Printing Length: 480 mm, Max Height of Tubs: 130  ...

Age 2004, Consisting of:, Base Machine is a OMSO DM44N 2-Lane Lid Machine without the Print Heads and UV-Tunnel, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumalator as well 2 x Denesting unist each with a Vertical Magazine with Universal Helical Screws with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Label Dispenser, Label dispensers, with PLC Controls manufactured by Fuji Seal, Switzerland Outfeed Conveyor to 2-Lnae Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Vision System to monitor the Color and positioning of the Labels 400 V, 3 phase, 50 Hz, Max. Lid dimensions: [Round Lids]: Dia. 125 mm, Height: 25 mm. [Rectangular & Oval Lids]: 125 x 150 mm, Height: 25 mm, Single  ...

Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...