We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (5)
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (7)
- Carousel Turning Machines (Lathes) (60)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (37)
- CNC Cycle Turning Machines (43)
- CNC Double Spindel Turning Maschines (Lathes) (16)
- CNC Long Turning Automatics (24)
- CNC Long Turning Machines (21)
- CNC Multiple Spindel Turning Lathes (10)
- CNC Sloping Beds (2)
- CNC Turning Automatics (25)
- CNC Turning Centers (246)
- CNC Turning Machines (573)
- Cutting-Off Machines (9)
- Cycle Lathes (40)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (281)
- Facing Disks (1)
- Facing Lathes (9)
- Facing Lathes With Tailstock (1)
- Feed Automatics (1)
- Heavy Lathes (37)
- High Precision Lathes (9)
- High Precision Turning Machines (Lathes) (8)
- High Speed Lathes (1)
- Hollow Spindle Turning Machines (Lathes) (4)
- Horizontal Turning Centres (2)
- Horizontal Turning Machines (Lathes) (5)
- Longitudinal Turning Machines (Lathes) (5)
- Lunettes (19)
- Multi Spindle Automatics For Bars (25)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (25)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (19)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (15)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (15)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (97)
- Turning Machines (Lathes) And Turning Automatics (2)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (4)
- Universal Lathes > 800 Mm Diameter (10)
- Universal Lathes Up To 800 Mm Diameter (7)
- Universal Turning Machines (Lathes) (24)
- Vertical Turning Centres (1)
- Vertical Turning Machines (33)
- Vertikal Turning Machines (Lathes) (36)
- Whirling And Thread Whirling Machines (1)
- more
- abb (3)
- ACCUWAY (4)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- ALZMETALL (1)
- AMADA (1)
- AMUTIO-CAZENEUVE (1)
- Angelini (3)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AXA (1)
- AYEL-TECH (2)
- BAUER (2)
- BECHLER (1)
- Benzinger (8)
- BERG (1)
- Bernardo (21)
- BERTHIEZ (4)
- BIGLIA (26)
- BISON (1)
- Blansko (2)
- BOEHRINGER (26)
- BOEHRINGER-VDF (1)
- BOLEY (4)
- BRAUN ZERBST (1)
- BREUNING-IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULMAG (1)
- Bulmak (2)
- BÖHRINGER (4)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (29)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (2)
- Chevalier (2)
- CHIAH CHYUN MUELLER (1)
- Chiron (3)
- CITIZEN (24)
- CKD (1)
- CKD BLANSKO (2)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (7)
- Colchester (39)
- COLOMBO (2)
- COMEC (1)
- Contur (2)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- CZ.TECH (1)
- D (1)
- DAEWOO (6)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (24)
- DMG GILDEMEISTER (25)
- DMG GILDEMISTER (1)
- DMG MORI (59)
- DMG Mori Seiki (4)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-GILDEMEISTER (2)
- DMG-MORI (1)
- DMT (1)
- DMT / KERN (1)
- DMTG (1)
- DN SOLUTIONS (6)
- Doerries Scharmann (2)
- DOOSAN (69)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-DAEWOO (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (12)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (2)
- E/D/E, WUPPERTAL (1)
- EBOSA (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
abb 3
ACCUWAY 4
AJAX 1
AMADA 1
Angelini 3
ARAD 1
AXA 1
BAUER 2
BECHLER 1
BERG 1
Bernardo 21
BERTHIEZ 4
BIGLIA 26
BISON 1
Blansko 2
BOEHRINGER 26
BOLEY 4
BULMAG 1
Bulmak 2
CAORLE 1
CARNAGHI 1
CAZENEUVE 29
Celoria 2
CERUTI 1
Chiron 3
CITIZEN 24
CKD 1
CLOVIS 1
CMT 3
CMZ 7
Colchester 39
COLOMBO 2
COMEC 1
Contur 2
CORMAK 1
CS 1
CZ.TECH 1
D 1
DAEWOO 6
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 24
DMG MORI 59
DMG-MORI 1
DMT 1
DMTG 1
DOOSAN 69
DORMAC 1
DORRIES 1
DORRIES. 1
DUGARD 1
DÖRRIES 12
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 3
EMAG 39
Emco 53
Ergomat 7
ESCO 1
FALCON 1
FAMAR 5
FAMGT 1
FANUC 2
FARREL 1
FAT 3
FEELER 4
Feinbau 3
FMB 5
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 4
GDW 3
GEMA 1
GEMINIS 13
Gildemeister 120
Goodway 6
Graziano 3
GURUPTZE 1
GURUTZPE 8
Guss 2
GWM-TECH 2
HAAS 34
HANKOOK 4
HANWHA 7
HAPREMEC 1
HARDINGE 15
Harrison 6
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HNK 1
HOESCH 1
HOFFMAN 1
HOFMANN 1
HUNGER 1
HURCO 7
HUVEMA 10
HWACHEON 10
Hyundai 17
ICOCA 1
IEMCA 2
IMT 1
INDEX 84
INNSE 2
IRLE 1
JESSEY 9
JMTCL 1
JOHNFORD 5
JUNG 1
KAMI 5
Kern 4
KERN-DMT 1
KEYENCE 4
KIA 1
Kitagawa 2
KITAMURA 2
KLAASSEN 1
Klaaßen 2
Klopfer 2
KME 1
KMT 1
KNUTH 6
KOLOMNA 9
Kovosvit 4
LABOR 2
LACFER 2
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 1
Leinen 3
LIEBER 1
LNS 5
LORCH 1
LÖW 2
M+M 1
MAE 1
MAIER 4
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 11
MATRA 4
MAYFRAN 1
Mazak 110
MCM 4
MERLI 1
METOSA 1
MEUSER 14
MEXPOL 2
MFD 2
MICROCUT 3
MIOTAL 4
MISAL 1
approved
dealer
dealer
4.750 € Conventional centre lathe with DRO EXCEL Distance Between Centres 2200 mm Centre Height 250 mm Swing Over Bed 500 mm / approx. 20 in Swing in Gap 700 mm Gap Length 315 mm Swing Over Cross Slide 300 mm Bed Width 400 mm Cross Slide Travel 315 mm Top Slide Travel 130 mm Spindle / Headstock Item Specification Spindle Nose DIN 55027 C8 Spindle Taper Metric 80 Spindle Bore 78 mm Number of Spindle Speeds 21 Spindle Speed Range 20–2000 rpm Main Spindle Motor 11 kW / 15 HP This item is delivered loaded on truck or container. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-3
approved
dealer
dealer
Main technical data Tip height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Center width: approx. 450–470 mm (depending on the version) Spindle bore: 20 mm (W20) or 25 mm (W25) Speed range: up to approx. 3,000 rpm, depending on the model also higher Including workbench and drawer cabinet with various accessories Auction-ID: A1-47143-30
approved
dealer
dealer
VEB Heavy-Duty Industrial Lathe Type: Heavy-duty industrial lathe Manufacturer: VEB Großdrehmaschinenbau \"8. Mai\" (Germany) Year of manufacture: 1993 Distance between centers: 4000 mm Swing over bed: approx. 800 mm Swing over carriage: approx. 500 mm Spindle bore: approx. 80 mm Power supply: 3-phase, 380 V, 60 Hz Control voltage: 220 V Installed power: 13.5 kW Rated current: 28 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-23
approved
dealer
dealer
Machine Type: Conventional Engine Lathe Manufacturer: Boehringer Göppingen Brand / Series VDF Made in Germany Auction-ID: A1-47114-36
approved
dealer
dealer
On rack Hahn & Kolb. Equipped for 120 tools. Auction-ID: A1-46783-134
approved
dealer
dealer
Equipped with FMB Mini Turbo feed device Auction-ID: A1-46783-42
approved
dealer
dealer
approved
dealer
dealer
Capacity: Swing over bed: 720mm Swing over saddle: 590mm Max. turning diameter: 481mm Max. turning length: 755mm Bar working diameter: 102mm Spindle: Chuck: Sam Chully MH-212 (305mm) Spindle speed: 2800rpm (belt type) Spindle nose: ASA A2#11 Spindle bearing diameter: 160mm Spindle through hole diameter: 115mm Turret: No. of tool stations: 12 OD tool size: 25mm Boring bar diameter: 50mm Indexing time: 0.15 sec Carriage: X-axis: 260mm Z-axis: 830mm Rapid traverse X-axis: 25m/min Rapid traverse Z-axis: 30m/min Tailstock: Quill diameter: 100mm Quill bore taper: MT#5 Quill travel: 100mm Machine is equipped with: - 2800rpm 35/22kW 1600Nm - Sam Chully MH-212 (305mm) - Live center MT-5 - Part catcher - Axis-Tool Number display - Bar feeder interface - Doosan Tool Load Monitoring - Manuals - Programmable tailstock - Tool setter - 128 Pairs of tool offsets - Part program storage 1 ...
approved
dealer
dealer
Voltage: 3 phase 220v Auction-ID: A1-46783-22
approved
dealer
dealer
approved
dealer
dealer
Equipped with feeder FMB type Mini Turbo S Auction-ID: A1-46783-46
approved
dealer
dealer
Machine is equipped with: - chip conveyor - part catcher - part conveyor - Powergrip H-08 chuck Auction-ID: A1-47218-13
approved
dealer
dealer
Approx. 19x holder. Equipped with 15x 3-fold plastic tool holders TulKech Systems Auction-ID: A1-46783-129
approved
dealer
dealer
Operation unknown/ Equipped with LNS type Quick load servo III Auction-ID: A1-46783-6
approved
dealer
dealer
approved
dealer
dealer
Lathe Schaerer, model UD632 Working shöhe über Flur : 1120 mm Spitzenhöhe über Flachbahn : 320 mm Diameter over Bett : Ø 660 mm Diameter over shelf slits: Ø 450 mm Diameter over shelf length : Ø 420 mm Extension via extension: Ø 710 mm Antriebsleistung : 15 – 22 kW Max. working support weight between the Spitzen without Setzstock: 1500 kg Max. working support weight between the S. with a set stock: 2200 kg Width : 460 mm Arbeitsspindle Spindle head with Zentrier cone: 55022 , gr. 8 Spindle in advance bearing : Ø 120 mm Spindle bohrung, continuous : Ø 72 mm Vorn Cone 1:20 : 80 mm Inner cone : Morse 5 Drehzahlen : 1,8 – 2240 rpm Details: Machine is in very neat condition Double prism underlying bed, so very accurate Digital readout HEIDENHAIN , model ND 780 Infinitely adjustable speed! Forkardt chuck Ø 400 mm Automatic lubrication system Automatic chisel support R ...
approved
dealer
dealer
Chuck diameter: 360mm Tooling in turret not included! Auction-ID: A1-47218-11
approved
dealer
dealer
Equipped with gantry loader Mazak type flex-GL200N Auction-ID: A1-46783-24
approved
dealer
dealer
turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/minspindle: 1 kWgripping station: 42 mmturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders (see picture)5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 4 ...
approved
dealer
dealer
Robot, tooling in turret and oilmist filter not included! Auction-ID: A1-47218-18
approved
dealer
dealer
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...
approved
dealer
dealer
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...
approved
dealer
dealer
approved
dealer
dealer
Equipped with feeder FMB type turbo 5-55 Auction-ID: A1-46783-36
approved
dealer
dealer
approved
dealer
dealer
On rack Hahn & Kolb. Equipped for 120 tools. Auction-ID: A1-46783-135
approved
dealer
dealer
On rack Hahn & Kolb. Equipped for 120 tools. Auction-ID: A1-46783-131
approved
dealer
dealer
Brand IDIMA S.A. Model SN 500 SAConventional parallel latheEquipped with 3-jaw self-centering plateIncludes tailstock includesdigital dimension display (DRO) Quick change tool holder installedIntegrated lubrication and coolingLong prismatic bedUsed condition with visible wear and dirtMachining chips presentYear of manufacture not identified in the imagesTechnical inspection is recommended prior to commissioning Auction-ID: A7-47333-45
approved
dealer
dealer
approved
dealer
dealer
