veneer machines used for sale (107)

Cutting length: 3100 mmCutting height: 45 mmMotor output: 1,8 kWDimensions (L/W/H): mmmachine weight ab.: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rear depth stop Auction-ID: A7-44241-136

A feed motor was retrofitted to the machine. see pictures. Auction-ID: A7-44241-134

Treadmill 7m, working width 60cm Auction-ID: A1-43330-25

Machine No. 9519,plate dimensions approx. 3000 x 1350 mm,passage height approx. 400 mm,cylinder 8 pieces with diameter approx. 90 mm,plates are in need of overhaul (The article is in condition as existing and unchecked. The item is sold from the foundation!) Auction-ID: A7-43232-66

Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Dates will follow later!

Veneer joining machine with pneumatic voltage Cutting length 3m L x W x H: 3.5 x 1.2 x 1.7 m Year of construction 1996 Weight approx. 550 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Veneer Scissors Brand: Josting Model: EFS 3200 Cutting length: 3200 mm Two-hand control, no light barrier Rear stop with handwheel adjustment

KUPER FW-920 Zig-Zag Veneer Gluer Passage width max. approx. 920 mm, veneer thickness approx. 0.4 - 2 mm, feed speed approx. 15 m/min

Mayer FH2-3120 veneer saw, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Mayer A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy to guide sawing unit, runs on linear guides. Rear storage table with penetrating finger stop, adjustable from approx. 2 - 62cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor saw 1.8kW, milling 1.0kW The motors can be switched on practically on the handle, so they only run when they are needed. HM-tipped fine-cut blade, sharpened Plough head Z4, equipped with new carbide indexable inserts Practical front veneer shelf, pull-out for ...

A veneer jointing and fine cut sawing machine Scheer is available. Cutting length: 3100mm, cutting height: 45mm, max. saw blade diameter: 180mm, pressure beam opening height: 80mm, fence depth: 500mm, machine dimensions X/Y/Z: approx. 3750mm/1400mm/1300mm, weight: approx. 500kg. An on site inspection is possible.

Veneer splicing machine manufactured in 2007. This KUPER FLI model is designed for precision veneer splicing. It operates at a voltage of 400 V and a rated current of 14.5 A. If you are looking to get high-quality veneer processing capabilities, consider the KUPER FLI Veneer splicing machine we have for sale. Contact us for further details.

JOSTING single-knife veneer cutting machine EFS 2800 for sale ex site.

Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.

MONGUZZI CNC 2-Knife Veneer Cutting Machine AFD-52-3000 from location for sale.

This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.

A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible.

A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Documentation available. An on-site inspection is possible.

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Manufacturer: Josting , Type: QFS 800, Year: ca.90, Program: yes, Pressbalkenöffung mm: 800, Handverstellbarer Laser: yes, Schnittbreite min-max mm: yes, Working hight mm: yes, Alignment light: 5000 X 1200 X1600, Digital readout lineal guide: 2000, Randverstärkung Leimpfaden: mit Automascher Längenerkennung über Luminizenkamera/über Kreidestriche, Year :ca.90

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

: Josting, : QD1, : 1981, : yes, : 800, : 45, : yes, : yes, : 1200 x 800 x 1600, : 500, : yes,

Manufacturer: Fleck Söhne, Type: DG 46, Year: 2007, Cutting lenght mm: 4600, Year :2007

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006