paper converting: die cutters used for sale (222)

Labeling Division m/m lettering / Stamped no. Slope 25 1:3 4x3 9006 4.3.74 41a 7 8x8x8x8 40 6 3 401 5 m/m 44 3:1 3x4 1235 51 3:1 4x4 Viereckloch / Nr. 38449 42 2x8 Kunststoffkamm / USA 41 2x7 Kunststoffkamm 20 3:1 3.5x4.5

Heidelberg Cylinder SGS The Cutting machine Age: 1973 Max. Sheet Size: 72 x 104 cm Min. Sheet Size: 40 x 55 cm Stacking height: 115 cm in Feeder, 100 cm in delivery Performance: max. 4000 sheets/hour Power: approx. 400 tons Counter: 13.4 million 3x Chases Machine in very good condition

Rabolini Imperia "F" Gold with Hot Foil stamping Age: 2020 Max. Sheet Size: 120 x 165 cm Punching force: 380 tons Performance: up to 1300 sheets/hour Max. solid cardboard thickness: 1.6 mm Max. Corrugated Cardboard thickness: 7 mm Min. solid cardboard: 300 gr Equipment: Safety rules as described in CE and G.S: 2x Safety Mats and additional safety precautions at the machine. Pneumatic brake-clutch system with safety valve Automatic Central lubrication Control Panel with rotatable Arm Operation Modes: Single, Timer, Continuous Time setting at Control Panel: Time between opening and closing 1 – 6 seconds Second Timer for timed operation in closed position Batch Counter Hardened and ground Die Plate, 50 HRC, 5 mm 1x Universal locking Frame with Electric Motor Pressure Fine Tuning (Micrometric pressure adjustment of the platen die-cutter) Extended Opening of the Di ...

Heidelberg Cylinder SBB Age: 1969 The Cutting machine Size: 57x82 cm

Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and  ...

Maximum sheet format: 1420 x 1020 mm Minimum sheet format: 700 x 500 mm Maximum cutting force: 600 t Gripper margin: 18 – 22 mm Maximum output: 6000 sheets/hour Processable materials: Cardboard 100 – 1000 g/m² Corrugated board: F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with stripping station, inter-sheet inserter, and pre-stacking device, operator platform - 1 x Preparation table for external tool setup - 6 x Frames for stripping forms - 6 x Chase frames for cutting dies - 6 x Setup trolleys

Bobst SP 142E, Year 1982, Max.Size: 1.420 x 1.020 mm, Min. Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Running hours: 19.125 h, Centerline, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Betriebsstunden: 19.125 h

Bobst SP 142-E, Year 1981, Max.Size: 1.420 x 1.020 mm, Min. Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Running hours: 19.125 h, Centerline, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Betriebsstunden: 19.125 h

Bobst SP 142-E, Jahr 1989, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Running hours: 55,500 h, Centerline, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Betriebsstunden: 55.500 h

Heidelberg SGS Punching Machine / Die Cutting 72 x 102 cm Heidelberg Shed Storage / HighPile Stream Feeder High Pile Delivery

Used Punching Pot ERBA TITAN EM 1 With defective electromagnetic clutch as part carrier or for restoration. Very cheap to sell. Punching crucible ERBA TITAN EM 1 for punching with strip steel cuts For cardboard, paper and plastic films Table size 645880mm 900 - 1800 sheets / hour Drive motor 3 KW Electromagnetic coupling External dimension 15801550mm Weight 3300 kg Space requirement 6.2 cbm Automatic lubrication Year of manufacture: 1986

max. format 26 x 38 cm Built in 1967 2 locking frames Inking unit not complete Delivery date: immediately from stock

A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible.

One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...

Impressions=17 m, Condition= Very Good , Availability= 2026-07-11, Maximum sheet size: 760 × 600 mm Maximum die cutting size: 743 × 585 mm Minimum sheet size: 279 × 210 mm Paper: 100 g/m² and above Board: up to 1,500 g/m² (approx. 1.8 mm) Plastic materials (PET, PP, PVC): up to 1,500 g/m² Maximum speed: 5,500 sheets/hour Maximum cutting pressure: 165 tons Gripper margin: 10 mm Machine dimensions: approx. 4.87 × 2.69 m Weight: approx. 5,500–6,000 kg Features: Automatic die cutting Creasing Embossing Hot foil stamping

corner punch, cleaned and tested. Punching tool No. 7

Reference ID: PP-59584 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102 E II Year Built 2001 Speed 7500 sheets/h Max. size 72x102 cms Min. size 35x40 cms Condition Good Location Europe Availability Immediately Machine Description Approx 40,000 hours of work Max pressure: 250 tons. Thickness from 80 to 2000 grm/sqm Non stop feeder and delivery Center line system Two frames for stripping and two for die cutting Micrometric adjustment thin plate system Double action stripping Cube control system In production, any test possible, very nice conditions Complete with all parts and many accessories, Available immediately

Size: 1420 x 1020 mmEquipments:Max. speed 6,000/hGripper 18–22 mmMax. sheet 1420×1020 mmMin. sheet 700×500 mmDie-cut force 600 tStripping stationIntermediate sheet feeder Pre-pile deviceWorking platformCardboard 100–1000 g/qm2 & corrugatedTool prep table6× chases · 6× stripping frames · 6× setup trolleys

IBERICA SPDK-105 • Reference ID: PP-59169 • Category: Flatbed Die Cutter • Manufacturer: Iberica • Model: SPDK-105 • Year: 2013 • Condition: Good • Location: Europe • Availability: Immediately • Speed: 7,500 sheets/hour • Maximum sheet size: 750 x 1050 mm • Minimum sheet size: 350 x 400 mm • Maximum cutting area: approx. 740 x 1050 mm • Cutting pressure: approx. 300 tons • Suitable for carton: approx. 90 – 2,000 g/m² • Suitable for corrugated board: up to approx. 4 mm • Non-stop feeder system • Non-stop delivery system • Automatic sheet feeding • Central lubrication system • Touch screen control panel • PLC-controlled operation system • Double sheet control • Front and side register system • Quick-lock die change system • Safety covers and light barriers • High-pile automatic feeder • Waste stripping unit ...

max. format 26 x 38 cm Built in 1964 Inking unit not complete 2 locking frames Dry pollinator Delivery date: immediately from stock

Fully Automatic High-Performance Die Cutting Machine With Integrated Stripping And Blank Separation, Designed For Industrial Folding Carton And Packaging Production. The Machine Features A Non-Stop Feeder And Delivery System For Continuous Operation And Maximum Productivity, Max. Sheet Size: 1060 × 750 Mm, Min. Sheet Size: 400 × 350 Mm, Paper From 90 G/M², Carton Up To 2000 G/M², Corrugated Board Up To 4 Mm, Max. Die Cutting Pressure: 260 Tons, Mechanical Speed: Up To 6,500 Sheets/Hour (Designed For Up To 8,000 Sheets/Hour), Quick Lock Die Frame, Quick Lock Stripping And Separation System, Ultrasonic Double Sheet Detection, Anti-Static System, Precision Gripper Transport System, Pneumatic Die Locking, Motorized Pressure Adjustment, Heavy-Duty Drive System, High-Precision Registration Control, Complete Tooling Included, Quick Change Frames, Automatic Waste Removal, Non-Stop Delivery  ...

Max. size= 750 x 106 cm, Availability= 052026, Masterwork (Heidelberg) Automatic Diecutter with Stripping Station Max sheet size : 750 x 1060 mm Min Sheet size : 360 x 400 mm Max speed ; 7,700 sph Max cutting pressure : 260 tons Calliper : Min 90gsm Max 2000 gsm Complete with : Touchscreen machine operation Non-stop pallet feeder Belt table Centerline system by Punching- and Stripping stations Non-stop deliveryLOT Loaded in truck or container

Bobst SP 142 E, Year 1992, Max.Size: 1020x1420 mm, Min.Size: 500x700 mm, Max.Speed: 6500 Sh/h, Max.Cutting force: 600 T, Centerline, Quicklocksystem

A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible.

Martin 924 Midline Casemaker, Year: 1991, Max.Size: 2400x1200 mm, Min.Size: 750x340 mm, Max.Speed: 15000 Sh/h, 3 Color, Slotter, Rotary Diecuttung, Foldingstation, Counter Ejector, Taper, Prefeeder Packfeed, Mosca Strapping machine , Year 2009, in production

KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then