beverage machines used for sale (2,288)

900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Transportable 1000L Bulk Container Tank Manufacturer: Bison Stainless Steel, Top Entry Manway. Previously used for spirits This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Horizontal Leaf Filter Spadoni Year of Manufacture: 2018 Model: DCBL/80 Stainless Steel This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

10BBL Brewery Complete Brewery Consisting of : 10 Brl Brewhouse (Hot Liquor Tank, Mash Tun with Underback and Kettle/Copper) built and installed by Johnson Brewery Designs in 2011. The brew house is powered by immersion heaters and requires a 3 ph (415v) electricity supply. The Majority of brewery pipework is hard piped and integrated with Brewhouse pumps, includes in-line hop seed filter, 10 Brl per hour Heat Exchanger (previously operating on 11ºC well water) and able to chill wort down to 18ºC The Wort kettle is set up to use whole hops Grist Case. 350 kg capacity with 8m x 4” auger tube ( 2 tonne per hour) feeding to grist hydrator. Typical mashing in time 12min to 14min HWT: Gross Capacity 2,500, Temperature controlled with recirculation pump. 2 x 12 kW Immersion elements. Top manway access for additions. Overflow Pipe. Mash Tun: Maximum Grist capacity 500 kg. ...

Vertical Cylindrical Transportable Tanks. Stainless Steel 700L Approx. Insulation, temp probe pocket port, carbonation stone port, sample tap port. Previously used for carbonating beer. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Stainless Steel Mash Tun 1800L. Manufactured: 2015 Manufacturer: Brewing Vessels Ltd. Insulated with 80mm of insulation. Side entry manway. Sight level side window. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

5UKBBL / 800Liter Brewery Stainless Steel, Insulated & Clad in Wood. Mash Tun with Wedge-wire Floor Plates & Front Manway. Copper with 18kW & 12kW Elements (both new) & Copper Dome Top. Hot Liquor Tank with 2 x 18kW Elements; One New. 3 x Fermenting Vessels with Temperature Probes, Tops & Lids; Raised On Stainless Steel Legs. Cold Liquor Tank, raised on Stainless Steel Legs. Underback / Hopback Vessel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

9 Gallon Cask (Firkin) Stainless Steel This is a SECOND HAND Item and is Sold AS IS For more information and more available stock please visit us at - advancedbrewing.co.uk

Pasteuriser and Operating Panel Manufactured by APV Consisting of APV heat exchanger, holding tubes, pump and control panel with chart disc recording Output 200 BBL/320HL Complete with: 30BBL/49HL sterile beer tank Side entry manway Insulated and clad in stainless steel 2BBL/300 litre sterilising tank This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

50BBL/80HL conditioning/bright tanks MANUFACTURED BY BRABY YOM 1973 Test pressure 45PSI Working pressure 30PSI Vertical cylindrical single skin tanks . Side entry manway door and C.I.P Arm This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

40BBL/65HL Conditioning tank manufactured by DME Vertical cylindrical single skin tanks for use in a chilled room . Dimensions approx: Diameter 2200mm Overall height 3,700mm Tanks are stamped – Certified by Meuller Originally designed for 15PSI Side entry manway door and C.I.P Arm Working capacity is 40UKBBL/65HL with 11% head space This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Pall Supradisc Filter - Secondhand, Unused Item: Manufacturer: Pall Corporation Type: SUPRADISC Model: WSFZ161 (038.161.1) Year of Manufacture: 2021 Made in Germany This is a secondhand item that remains completely unused since purchase in 2021. All components are present and correct. (Offered in "As-is" condition) This is a SECOND HAND ITEM and is sold as is For more information and more available stock please visit us at - advancedbrewing.co.uk

50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk

Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

5BBL /800L Working Capacity Fermenting Vessel - stainless steel. Specification: Vessel = T 160 FV Gross Capacity 6 Barrels 220 Gallons 1000 Litres Material Stainless Steel – Grade 316 (1.44040) Description: Vertical stainless steel vessel, dished top and dished base. Free standing on 3-legs with adjustable feet. Fitted on the shell with a stainless steel Jacket, this is a low pressure open system jacket. Insulated on the shell in 50mm mineral wool insulation. Clad on the shell in bright polished, riveted stainless steel. Fittings: 1 x Top Manway Dia. 400m 1 x 1” RJT Feed to Dia.64 180° up pattern Spray Ball 1 x 120mm Dia, Viewing Glass 1 x 1½ RJT outlet with butterfly valve 2 x 1” BSP Male Inlet / Outlet to Jacket 1 x Temp pocket This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at ...

Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Enotecnica Pillan 40cm x 40cm 22 Plate Filter. Filter Plate Stainless Steel, consisting of 22 plastic plates. Filter type 40cm x 40cm. DIN Fittings + RJT Male Butterfly Valve This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Mash Mixer / Elevator. Stainless Steel Hopper. 500mm x 800mm 500mm deep Feeding a rotor + stator pump - type monosb031. Serial Number: typesb031a c1r5/g no.c319843/01 2" RJT Outlet with dispense tube of 2". Previously used for a mash grist hydrator delivering into a mash tun. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

15 BBL working capacity stainless steel vertical cylindrical mash tun, with side entry door for spent grains removal. Drilled plate floor removable in 4 sections. Sparge arm and bridge. Vessel is free standing on stainless steel removable legs. Has a 2" RJT Female outlet. Lid consists of one half moon shape section. Overall Height from ground - 2500mm Internal Diameter - 1550mm Overall Diameter - 1650mm Internal Vessel Height - 1550mm 50mm of insulation to the shell, with stainless steel cladding pop riveted. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

BREW FLOW - S - flowmeter With 1.5" Tri Clamp Fittings - This is a SECOND HAND ITEM and is sold in AS IS Condition MOBILE FLOW SYSTEM The BREW FLOW - S is designed as a mobile flow system for the brewing industry and offers a reliable and effective solution to accurate flow measurement. Choose which tank or part of the process you wish to measure, connect your flexible hoses to the inlet and outlet fittings and provide power to the meter and you are ready to go. Use the BREW FLOW - S to accurately measure the efficiency of the brewing process by seeing the flow rate and total flow values. The BREW FLOW - S uses the Siemens Electromagnetic flow meter and provides a maintenance free device with no moving parts, therefore the BREW FLOW - S will continue to perform accurate and repeatable results for many years. Features Hygienic design – Cleanliness assured Sturdy and por ...

Second hand ABUK 5 BBL Brewery System System consists: - 5 BBL Hot Liquor Tank; electric heating element. - 5 BBL Cold Liquor Tank; 1000 litre square IBC, plastic. - 5 BBL Mash Tun; drilled-plate floor, re-circulation & thermo-well. - 5 BBL Kettle designed for WHOLE FLOWER HOP; low-level thermo-well; electric heating elements. - (2x) 5 BBL Fermenting Vessels; sample taps; extension legs; racking outlet. - Under-back. - Hop Seed Strainer. - Plate Heat Exchanger. - Fixed / welded / partially flexible brewhouse pipework. - Brewers Hoses. - Butterfly & Diaphragm Valves. - (3x) Pumps & Pump Adaptors. - Remote Ice-bank Cooler with internal heat dump. - Electrical Control Panel. SECOND HAND SOLD AS SEEN. For more information and more available stock please visit us at - advancedbrewing.co.uk

Keg Washer/Filler - Second Hand 2 head keg washer filler complete with beer carbonator manufactured by NT Teknik Type NM Keg 1-1 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

1000 Litre Stainless Steel Second Hand Tank Capacity: 1000L / 220 Gallons / 6 Barrels Vertical Stainless Steel Vessel, with dished top and dished base Free standing on 3-off stainless steel legs with adjustable feet Working pressure 1 Bar Empty weight: 100kg approx. Fittings: 1 x DN40 Top Inlet 1 x 120mm Diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Stainless Steel Cooling Coil Second Hand Item DIN32 Male Fittings Diameter is 55.5cm x 49cm Overall Height - 64cm Overall Width including fittings pipework is 70cm This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk

This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...

Moravek Two Stage Element Filter - SECOND HAND DIN Fittings Moravek BF05 filtration system Continuous clear beverage microfiltration unit for cold sterilisation of pre filtered clear beverages like water, wine, bright beer etc. Filtration can take place either prior or after the carbonation. Filtration consists of two separate steps, 1 micron pre filtration followed by 0,45 microns sterile filtration. Machine model BF consists of components as follows: Two independent housings for holding three of filter element each designed to pressure from -1 to +10 bar Hand operated valves Pipe work system including to division flow plate The Machine is of skid mounted design, situated on 4 independent adjustable feet with rubber pads. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

CIP set - Moravek 5sa - Second Hand Moravek CIP 5SA designed to CIP and fully sanitises the keg filler and Moravek BC30 Beer carbonator with or without optional BF30 sterile filtration module. The Moravek CIP 5SA can also be used to CIP brewery conditioning, bright beer tanks and vessels up to 65HL (circa 2m internal diameter) when fitted with specified Alfa Laval spray ball cleaning heads as well as other ancillary brewery equipment Output flow adjustable range 500-5000 LPH Output pressure adjustable range 0-3 bar Capacity of tanks 2x250 litres Installed electric power max. 24kW Designed for cleaning BC30 Beer Carbonator, BF30 sterile filtration module, Can Pro 9/2 Filler/Seamer plus associated brewery storage tanks and vessels The unit is a mobile unit and can be used for CIP cleaning in other parts of the brewery as well. Measurements: Height: 1700mm approx. Length: ...