70 MARTIN used machine for sale

Table dimensions: 2.400 mm Motor output: 5/6 kW Spindle diameter: 30/40 mm reus: 3000/4500/6000/9000 U/min Weight: ca. 1.500 kg : Elektrisch : Elektrisch : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW, suitable for Martin HB100, Year of construction: 2019

Key data: 630 mm, 250 mm, 5 kW

Thickness planing machine Planing machine Thickener MARTIN TYPE: T41 Planing width approx. 630 mm Passage approx. 250 mm 4 knives planing shaft wedge bar shaft safety knife shaft infinitely adjustable feed speed 8-20 m/min. Articulated pressure beams Rubber feed and rubber pull-out roller Extraction connection: 140 mm Dimensions: 1000 x 1100x 1200mm Soft start control Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are a guideline, depending on the distance and unloading option they may vary. The items can be picked up by yourself or shipped at the expense of the buyer. The item offered is offered with differential taxation. The sales price shown is the g ...

spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.

Carriage length: 5000 mm; Cutting width at the width stop: 1050 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 120 mm; Scorer: no; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: handwheel; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 / 4800 / 6000 rpm; Motor power: 5.5kW; Suction port: 80 and 120mm; Machine length: 5500mm; Machine width:

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

Technical data: Saw blade min. 200mm max 500mm Scoring unit Cutting height for 500 mm saw blade = 170mm Cutting width at rip fence 1050mm Edging carriage length 3800mm Motor 5.5 KW/400Volt Speeds: 2800/4000/5500 rpm Digital ads for: - Rip fence - Saw blade height/protrusion - Saw blade swivel Rip fence adjustable from the operator station via handwheel Hydraulic height and swivel adjustment via foot pedal Wide and narrow extraction hood Weight 1350

Key data: 510 mm, 2500 mm, 4 St.

Trainer: Martin Type T 51 Planing width 510 mm 4 Knife Shaft Strip Planer Knife Standard Slit table lips for quiet running Swivelling dressing stop Table lengths 1400 mm and 1100 mm Maximum chip depth: 16 mm Speed of the knife shaft approx. 5000 rpm. Motor power approx. 5 kW Weight approx. 900 kg Dimensions approx. 2600 mm x 700 mm x H 1000 mm

Key data: 630 mm, 250 mm, 5 kW

Thickness planer Martin Type T43 Year of manufacture 1987 Planing width 630 mm Planing height 2 - 250 mm Cutting depth maximum 8 mm Electric height adjustment with digital display, counter Height adjustment with fast and creep gear Motor power main motor 5.5 kW, decelerated Feed speed 6-9-12-18 m/min. Rubberized feed rollers in the inlet and outfeed 2 Knife Shaft Strip Planer Knife Length of the thickness table 1100 mm Thickness table guided on 4 supporting spindles Central lubrication Extraction connection diameter 160 mm Dimensions 1200 mm x 1120 mm x H 1200 Weight approx. 1100 kg

Details Built in 1960 Type KW180 Accessories Multifix Steel Holder Collet chuck including sleeves Vises in the pictures are not included The Martin lathe from 1960 is characterized by its solid construction and high precision. It is ideal for a wide range of filming tasks and offers a high degree of flexibility thanks to its extensive range of accessories. It is ideal for workshops and manufacturing plants that value quality and reliability. The KW180 lathe is robust and durable. It was built in 1960 and is in good condition despite its age. The lathe comes with a wide range of accessories. This includes a Multifix steel holder, which enables quick and easy tool changes. A collet chuck including sleeves is also part of the accessories and expands the possibilities of the machine. Please note that the vices shown in the pictures are not included in the scope ...

This Martin T72 table saw was manufactured in 1989. Ideal for woodworking, it offers reliable performance for precision cutting. Consider the opportunity to buy this Martin T72 table saw. Contact us for more information.

Reference ID PP-55982 Category: Rotary Die Cutter (RDC) Manufacturer Martin Model DRO 1628 Year Built 1998 Color 3 Max. size 2800 × 1600 mm Condition Good Location Europe Availability Immediately Machine Description Martin Prefeeder Vacuum feeder 3 Colours Rotary DieCutter (RDC) Waste elimination Stacker The first flexo is rubber roll, the other two are chamber system Ceramic roller data (table): Columns: Dro | Lc | Cm2 Nyomda 1 | 100 | 8.00 Nyomda 2 | 100 | 10.26 Nyomda 3 | 100 | 7.26

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

Key data: 630 mm, 2 mm, 7 kW

Technical data/equipment: Planing width 630 mm Planing height 2-250 mm Speed 5000 rpm Motor power 7.5 kW Connection: 400 V, 50 Hz, 3~ Rated current 19.0 A Suction nozzle Ø 160 mm Weight approx. 1050 kg electr. Thickness table adjustment Thickness table guided on 4 spindles

MARTIN Swivel milling machine, type T 23, built in 1978, swivel range: -5 to 45°, spindle diameter 30mm, speeds: 4, height adjustment: handwheel, motor: 6 kW, table dimensions 1,100 x 940 mm, swivel adjustment handwheel

Martin FFG 924 Midline – Flexo Folder Gluer Line Reference ID: PP-53017 Category: Flexo Printer Manufacturer: Martin Model: FFG 924 Midline Year Built: 1989 Colors: 4 Condition: Good Location: Europe Availability: Immediately Technical Specifications Maximum size: 920 × 2400 mm Minimum size: 255 × 480 mm Speed: up to 18,000 sheets/hour Configuration Prefeeder: Martin (Year 2000) 4 Flexo printing units (Rapiset system) Slotter unit Rotary die-cutter Folder-gluer section Glue monitoring system: Valco GlueChek (Year 2016) Machine control upgrade: 2018 Strapping machine: Cyklop Inline 1200 (Year 1998) Palletizing system: MuK robotic palletizing system (Year 1998)

Dressing MARTIN T51 -used-noise-insulated table lips, joining bar, motor brake---------- Technical data ----------planing width: 51 mm, table length: 2,520 mm, max. chip removal: 16 mm, diameter planing shaft: 120 mm, number of blades: 2 pieces, swivel range dressing stop: 0-45 Â, suction nozzle: 140 mm, motor power: 4.8 kW

Table milling machine MARTIN T21 -used-finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1,000 x 930 mm, Spindle diameter: 30 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Suction nozzle Ã: 120 mm, Weight: 630 kg

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Martin Miniline 616, - Vacuum feeders, - Max.Speed: 24,000 Sh/h, - Max.Size: 600x1600 mm, - Year 1974/1991, - 2 Color Flexo, - Slotter, - Rotary die cutting, - Folding gluing, - Counter Ejector, Year 1991

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

Table milling machine MARTIN - used-finely adjustable milling fence, clockwise/counterclockwise rotation ---------- Technical data ---------- table size: 1,000x930 mm, work table height: 860 mm, spindle diameter: 40 mm, useful length milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, speeds: 3,000/4,500/6,000/9,000 rpm, motor: 4.7/5.7 kW, extraction nozzle Ã: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1000 mm spindle bore: 55 mm faceplate: 400 mm turning speeds: 18-1600 U/min digital readout: Haidenhain bed width: 340 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 290 mm turning length: 1000 mm spindle bore: 55 mm faceplate: 400 mm turning speeds: 50-1250 U/min digital readout: Haidenhain bed width: 340 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.