135 DOOSAN used machine for sale

This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information.

This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information.

This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine.

This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information.

Doosan G15S-2 Forklift truck Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

CNC vertical machining center Type: DEM 4000 Manufacturer: Doosan Year: 2020 Control: Fanuc i Series X: 550 mm Y: 400 mm Z: 450 mm Spindle taper: BT40 Max spindle speed: 8000 rpm Table: 650 x 400 mm Max table load: 400 kg Machine weight: 3100 kg Tool probe Renishaw Work probe Chip conveyor In January, a general overhaul of the spindle plus the table of all axes was carried out. The machine is fully equipped Vices-clamping from the company LANG Boring heads, a large number of carbide drills, cutters and tools. Clamping milling magnet Grip cutter plus a powerful table Top-notch hydraulic-collet clamping of which there are about 50pcs Plus top-notch gauges and measuring devices The machine also includes a snow compressor with a refrigerator. Machine in good condition, fully functional, under power Find more here - / Contact us at -

x-travel: 1300 mm y-travel: 670 mm z-travel: 625 mm control: Siemens Sinumerik 828D total power requirement: kW weight of the machine ca.: 8500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1300 mm y-travel: 670 mm z-travel: 625 mm control: Siemens Sinumerik 828D total power requirement: kW weight of the machine ca.: 8500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mm turning length: 1540 mm control: Fanuc 31i-B total power requirement: 94,42 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC  ...

turning diameter: 540 mm turning length: 1520 mm control: Fanuc 18i-TB total power requirement: kW weight of the machine ca.: 15500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Fanuc length: 3700 mm width: 1850 mm height: 2000 mm accessories:: ja weight of the machine ca.: 4,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.050 mm travel -y axis: 570 mm travel -z axis: 510 mm control: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/min tool taper: BT 40 table dimension (L x W): 1300 x 570 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

Find more here - / Contact us at -

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - / Contact us at -

turning diameter over bed: 1030 mm turning diameter over slide rest: 800 mm turning length: 3200 mm turning diameter: 900 mm control: FANUC 31i B : 165 mm spindle cone: ASA A1-15 travel -x axis: 470 mm travel -z axis: 3235 mm rapid travel - longitudinal/face: 12 / 10 m/min Measuring Speed: 3 - 1500 1/min spindle drive: 45 / 37 kW max. workpiece weight between centres: 7300 kg max.workpiece weight:each extra steadyrest: 1600 kg tail stock: tailstock adjustment: 3135 mm tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm tailstock quill taper MT: 6 total power requirement: 64,44 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: 7,36 x 2,77 x 2,78 m High-precision turning centre - 3-jaw chuck dia. 800 mm - FANUC 31iB CNC control - Tailstock - Hydraulic steady rest - 12-station tool turret (32 x 32 mm) - Chip conveyor - Coolant system - Tool setter - CE The da ...

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: FANUC 31i-B spindle turning speed - stepless: 15000 U/min spindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kW pallet table size: 500 x 500 mm workpiece weight: 500 kg distance spindle center to table: 80 - 810 mm Rapid Travel X / Y / Z-Achse: 60 m/min dimension of workpiece: 800 x 1000 mm total power requirement: 80 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,45 x 2,68 x 2,88 m Horizontal CNC machining centre - CNC control FANUC 31i-B - Tool changer 60-fold (BT 40 Big Plus) - 2 pallet changer(pallet 24-M16) - Table / Pallet indexing Full B axis. - Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m. - Coolant/Filtering Unit - Chip Conveyor - Exhauster The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1400 mm y-travel: 1050 mm z-travel: 1200 mm Control: Fanuc 31i spindle turning speed - stepless: 6000 U/min spindle taper: ISO 50 spindle motor: 35 / 22 kW pallet table size: 800 x 800 mm workpiece weight: 2000 kg distance spindle center to table: 75 - 1125 mm Rapid Travel X / Y / Z-Achse: 24 m/min dimension of workpiece: 1450 x 1550 mm total power requirement: 71 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 7,3 x 4,3 x 3,75 m Horizontal 4-axis CNC machining centre - Fanuc 31i CNC control - 60-position tool changer (ISO 50) - Rotary table (1° division) with 2 pallets - High-pressure cooling 70 bar with cyclone filter system - Chip conveyor - Tool loading management - Renishaw RMP 60 - TS 27R tool probe Spindle running hours 6000h, running hours: 8050h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 650 mm turning length: 2042 mm control: FANUC 0iT greates pass round over bed: 900 mm swing diameter over slide rest: 690 mm max. turning diameter: 650 mm spindle turning speed range: 1500 U/min spindle drive motor: 45 / 37 kW spindle nose: A1-15 bar material dia.: 165,5 mm Number of tools: 12 St. travel -x axis: 362 mm travel -z axis: 2155 mm tail stock: tailstock adjustment: 1000 mm diameter of quill: 120 mm quill stroke: 120 mm max. workpiece weight -without tailstock: 1400 kg workpiece weight max.: 2600 kg Rapid Travel X / Y / Z-Achse: 16 / - / 20 m/min total power requirement: 60,25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 5,98 x 2,5 x 2,88 m - Fanuc F0i CNC control - 21 chuck - 12-station turret - MT 6 tailstock - Chip conveyor - 1 steady rest - 1 tool measuring arm - 14.5 bar coolant system - Oil separator - Chip conveyor - Programmabl ...

turning diameter: 376 mm turning length: 1245 mm control: Siemens 828D greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 2800 U/min spindle drive motor: 22/18,5 kW spindle nose: ASA A2-11 spindle bearing diameter: 160 mm spindle bore: 115 mm bar material dia.: 102 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 24 St. travel -x axis: 260 mm travel -z axis: 1350 mm travel -y axis: 105 (+/- 52,5) mm 2nd Spindle:: spindle turning speed range: 4500 U/min spindle motor: 7,5/5,5 kW spindle passage: 62 mm spindle nose: ASA A2-5 total power requirement: 59,5 kVA weight of the machine ca.: 7,9 t dimensions of the machine ca.: 4,4 x 2,1 x 2,2 m Equipped with: - Siemens 828D control system - Chip conveyor - Counter spindle - Workpiece holding arm - High-pressure coolant pump - 12-position turret, 7.5 ...

7-axis automatic lathe Type: ST32G Manufacturer: Doosan Year: 2018 Control: Fanuc Series 31i Model B Number of axis: 7 Number of spindles: 2 X: 114 mm Y: 404 mm Z: 320 mm C1 & C2 indexation 0,001 deg. Axes X2: 393 mm, Z2: 343 mm Servo motor: X1, Z1,Y, X2, Z2: 1.0 kW Max machining diameter: 32 mm Max machining length: 320 mm Main spindle: 8000 rpm Subspindle: 6000 rpm Bar feeder: IEMCA BOSS 338 Oil cooling Suction: Losma Chip conveyor Pressure pump: 70 bar Included accessories Dimensions: 2630x1300x1800 mm Machine weight: 3500 kg Machine in good condition, under power Find more here - / Contact us at -

2021 Doosan Puma GT 2100 CNC lathe Type: Puma GT 2100 Producer: Doosan Year: 9/2021 Hours: 1008 Full functional, under power. Find more here - / Contact us at -

DOOSAN LYNX2100LMB (installed new in 2021). Model: LYNX 2100LMB Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 27.07 kVA Interruption Capacity: 5 kA Full Load Current: 41.14 A Short-Circuit Capacity: 10 kA Control System Output: L22SYH404A05 Weight: 3000 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list of toolholders ; A. Turning Holder - OD Tool Holder (Right & Left) - Quantity: 2 pieces - Face Tool Holder (Right & Left) - Quantity: 1 piece - Double OD Tool Holder (Right) - SUB- Quantity: 1 piece - Cut-off Tool Holder (Right Hand) - Quantity: 1 piece B. Boring Holder - ID Tool Holder - Quantity: 2 pieces - Triple ID Tool Holder - Quantity: 1 piece - U-Drill Cap - Quantity: 1 each C. Milling Tool Unit - Straight (Short) - Quantity: 2 pieces - Angular - Quantity: 2 pieces D. Tool Sleeves - Boring Sleeves (Main) - Quantity: 1 ki ...

DOOSAN LYNX2100LSYA (installed new in 2021) Model: LYNX 2100LSYA Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 37.43 kVA Interruption Capacity: 5 kA Full Load Current: 56.87 A Short-Circuit Capacity: 10 kA Control System Output: L220SYH840A05 Weight: 4150 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list toolholders ; Turret Type (Mechanism/Station): Servo/24ST Holder Mounting Type Tool Size (Turning/Boring): BMT-45P 20/32 mm Tooling Parts Detail A. Turret Head/Tool Table - - Quantity: 1 ea B. Turning Holder - OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Face Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN/SUB - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool H ...

CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -

3-axis CNC lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year: 2022 Control: Fanuc i-Series Hours: 270 Turning diameter over bed: 630 mm Turning diameter over support:460 mm Max turning length: 1030 mm Spindle bore: 81 mm Max work weight without/with tailstock: 260/520 kg Spindle speed: 3500 rpm Automatic turret: 12 positions Driven tools speed: 5000 rpm X: 265 mm Z: 1100 mm C: +-360• Chip conveyor Tool probe Machine weight: 4950 kg Machine in very good condition, under power. Find more here - / Contact us at -