pillow packs machines used for sale (304)

An entire system is being sold! The collection consists of Tango tapping, Ilapac Carrera 500 PC flow-wrapping machine, Mettler Toledo Chekweight and Espera labelling. The system is fully functional and serviced

Horizontal flow wrapper suitable for feeding and sealing blisters (two blister per flow bag) from the magazine into corresponding flow bags. Machine incl. code reader LAETUS type Argus 6012, image processing system UHLMANN type Visioread Colour, preparation for printer MARKEM type SmartDate X40, PLC SIEMENS Simatic S7-300, spare parts, etc. Output: up to 170 packages/min

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system with LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit, transparent protective enclosure and connected conveyor belt. Inspection possible by arrangement.

The Thimonnier M3200 is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag volume: 70 - 1. ...

Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...

Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor

1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt

BVM full wrapping machine COMPACTA 6010 Fully automatic. Strip feeding with light barrier control Used machine built in 1998; in operational condition with support band (support band) Technical data: Cross welding: 620 mm Belt width: 560 mm Passage height: 150 mm Longitudinal welding: continuously working Film width: max: 800x800 mm Half-tubular film Electrical connection: 400 VDS, 50 Hz with earth and zero Connected load: approx. 3 kW Paintwork: RAL 5007 - brilliant blue Standard working height: 850 +/- 50 mm Description: -Machine frame made of aluminium profiles screwed together -Feeding via conveyor belt in line -Infeed and outfeed conveyor belt, speed infinitely variable aboutFrequency converter -Triggering of the work cycle and control of the product via light barrier, optionally horizontal or vertical -Longitudinal welding continuously o ...

Connection: 380V/50Hz, current consumption: 7.1A, power: 2.1kW, weight: approx. 400kg. The machine was removed from production in working condition approx. three years ago and subsequently placed in storage. CE marking available. An on-site inspection is possible.

HDG duplex HFFS RB-200-2 Bj 2022 For two small stand-up pouches with reclosure (zipper) per cycle. Conversion to one large pouch possible. Current format: width x height x bottom gusset 90mm x 150/170mm x 2x25mm Output: up to 180 bags per minute (realistically 150-160). Barely run; like new. Without dosage. Location: near Frankfurt

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width transverse: 2mm Seam width longitudinal: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erection and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard derz. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap sealing station Acceptance of the folding cartons and transport to the filling station, fixation under the filling stat ...

Intermittent, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch Flow Wrapper Machine Type: SVB3601R Year of Make: 2000 Intermittent flow wrapping machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeder Machine type: FVS 3091 SQ Products suitable for dosing: - Granules - Powder - Icing sugar - Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch Checkweigher Machine type: KWE 5000 Year of Make: 2009 The plant was expanded and stored due to product changeover. 6 months before the machine was removed, a lot of investment was made, including new sealing jaws and a new display. We will be happy to send you a video of the run ...

Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Mint (fully functional) Year of Make: 2025 Capacity: Up to 20 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for laminated film ✅ Machine prepared for MAP ✅ Format tube for bag width 300mm ❌ Label dispenser ✅Videojet 6330 Printer ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Automatic foil centering ✅ Quick-change system for film with vacuum gluing table and knife ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt increasing ✅ Volume pneumatic filler with tank 200 – 300 litres Documentation & Operation Language (documentation & HMI): German (other languages on request)  ...

SALE ONLY WITHIN GERMANY AND AUSTRIA Ulma FR 200 The electronic, automatic flow wrapper type ULMA FR 200 has been specially developed to pack a variety of different products in flat bags (flow-pack) or pillow packs. Is Up Hnszkqvbjayeba Technical Specifications Model No.: FR 200 Condition: New (fully functional) Year of construction: 2024 Capacity: Up to 100 packs/minute (depending on film and product properties). Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2500 mm Features ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing except for high products (max. 160mm) Width sealing bar 300mm ✅ Beret system due to the cross-sealing for heavy bowls ✅ Function No product ...