lathes used for sale (3,027)

: neu : Bulgarien : 53750 €: 1015.88 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 M: 21 : 12,5 - 1250 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 90 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 turning length4.000 mm € 63 790,00 turning  ...

Chuck diameter: 200mm, Auction-ID: A1-43330-42

turning diameter: max. 900 mmturning length: max. 2.000 mmcontrol: MSD 501 II turning diameter over bed: 994 mmturning diameter over cross slideways: 733 mmstandard turning dia.: 374 mmcentre distance: 2.300 mmMain spindle:: turning speed range - main spindle: 3 - 1.500 min/-1power capacity - main spindel: 43 / 37 kWNumber of speed ranges: 3 spindle bore: 185 mmchucking diameter: 500 + 500 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 65 mmaxis stroke:: x-axis: 485 (450 + 35) mmz-axis: 2.150 mmTailstock:: tailstock: 2.100 mmdiameter of quill: 150 mmquill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 20 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 65 kVAweight of the machine ca.: 18,5 tdimensions of the machine ca.: 8,0 x 4,0 x 3,2 mDocuments: Chip conveyor: Coolantsystem: Three Jaw Chuck: 500 + 500 mm Tail ...

turning diameter: 820 mmturning length: 4500 mmcontrol: Siemens Si 840 D sl total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNew purchase price in the year 2022 EUR 1.2 millionTime recording from Feb. 2025Operating hours = 16085 hMain spindle = 616 hMilling spindle = 369 hCNC control Siemens Sinumerik Si 840D slMax. center distance 4500 mmWorking height 1375 mmX-axis travel -15…+725 mmY-axis travel -245…+4756 mmSwing diameter over cross slide 780 mmSwing diameter over bed 820 mmC-axis, smallest increment +/-0.001°Main spindle A15 with BVG, 3135 N,/2000 rpmSpindle head DIN 55026 Form A 15Max. speed 3000 rpmMax. torque 3135 NmDrilling/milling unitMilling power (40/100% duty cycle) 36.5/29.8 kWTorque up to 1110 rpm (40/100% duty cycle) 328/261 NmMax. spindle speed 5000 rpmSwivel range (B-axis) -105…+95°Vertical travel (Y-axis) -250…+250°SR ...

turning diameter: 305 mmturning length: 870 mmcontrol: FANUC 31i B5-NT-SmartX spindle turning speed range: 6000 + 6000 U/minturret head: 24 12 angetriebenDimensions (L/W/H): 3200 x 2500 x 2700 mmweight of the machine ca.: 16 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 180 mmturning length: 140 mmcontrol: FANUC 21TB bar capacity: 30 mmspindle turning speed range: -6300 U/minTop turret tool hodler:: 8 Stationen weight of the machine ca.: 0.8 tdimensions of the machine ca.: 2.2 x 1.1 x 1.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmswing diameter over bed slide: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 480 mmturning dia. in gap: 700 mmturning diameter over bed: 480 mmturning dia. over face-slide: 257 mmcentre distance: 1250 mmcentre height: 240 mmspindle turning speed range: 25-2500 U/mincontrol: ProtoTrak SLX total power requirement: 8 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: BTH 2,6 x1,5 x 1,75 mVery well-maintained machine, original new price approx. €60,000 netCan also be operated manuallyIncludes DXF file converter (for reading Autodesk CAD/CAM drawings)Includes USB SlotIncludes tailstock with air cushion supportIncludes Parat tool holder with one cassette and internal coolantIncludes 3-jaw chuck, 250 mm diameterIncludes coolant pump with reservoirIncludes automatic lubrication systemIncludes work area lightingIncludes pull-out chip drawerIncludes DocumentationIncludes CE ZertifikatThe data for this ad was created with ModulMWS - the sof ...

: neu : Bulgarien : 122250 €: 2310.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 5 - 1000 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 8550 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning length5.000 mm € 141 250,00 turning length ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75740 €: 1431.49 €: 600 mm: 1500 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 M: 3 : 20 - 100, 80 - 400, 400 - U/Min: max. 8 m/min: max. 8 m/min: 290 mm: 90 mm: 5 MK: 225 mm: 11 kW: 3,5 / 22 kW/Nm: 1,75 / 11 kW/Nm: 120 Nm: 1250 daN: 1050 daNFast and simple communication between the operator and the lathe.Simple workpieces are machined in the same way as on the universal lathe, but more efficient.Complicated workpieces are machined in the same way as on the universal lathe, but faster.Complicated workpieces are machined in the same way as on the CNC lathe, but easier.Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven softwareleads the operator also without programming skills simple and fast to the finished workpiece.The interface is simple and with large icons, which is convenient in a specific work environ ...

turning diameter: 432 mmturning length: 863 mmturning speeds: 3400 U/mincontrol: Haas CNC Control spindle bore: 88 mmgreates pass round over bed: 762 mmswing diameter over bed slide: 432 mm3-jaw-chuck diameter: 254 mmtravel -z axis: 864 mmtravel -x axis: 287 mmdrive capacity - spindle motor: 22 kWweight of the machine ca.: 7,25 tdimensions of the machine ca.: 3,9 x 2,0 x 1,9 mEquipment/accessories: - Tool turret: 12 positions - Tool holder: VDI 40 - 3-jaw chuck: 250 mm - Tailstock mount ISO: Ø 290 - Bar passage: 76 mm - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 5450 mmswing diameter over bed slide: 1250 mmswing diameter over support: 860 mmcontrol: Siemens 840 D spindle bore: 163 mmfaceplate diameter: 1000 mmfeeds -stepless-: 1 - 400 mm/mincenter height over square guideway: 630 mmworkpiece weight max.: 10000 kgEquipment/accessories: - 2 bezels - Tailstock - main engine with frame - Fixators - DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 190 mmturning length: 235 mmcontrol: FANUC/Mori MSX 501 spindle turning speed range: 50-5000 U/minturret head: 2x 16 weight of the machine ca.: 7.5 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 190 mmturning length: 235 mmcontrol: FANUC/Mori MSX 501 spindle turning speed range: 50-5000 U/minturret head: 2x 16 weight of the machine ca.: 7.5 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 47390 €: 905.15 €: 1 : 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 M: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS (PRICES ON  ...

turning diameter over bed: 440 mmturning diameter over slide rest: 270 mmturning length: 1.500 mmcenter height over bed: 220 mmdigital readout: FAGOR 3 Achsenturning diameter in the gap: 620 mmcentre distance: 1.500 mmbed width: 280 mmspindle bore: Ø 52 mmturning speed range: 30 - 2.360 U/min3-jaw-chuck diameter: 250 mmquick change toolholder: KLOPFER Typ GX2Bdrive capacity - spindle motor: 6,3 kWtaper in tailstock-quill: MK 4 dia. of quill: 60 mmquill stroke: 200 mmcoolant: voltage: 380 Vtotal power requirement: 6,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,90 x 1,10 x 1,75 m- Serial-No.: D8KK0633- 3-axis digital readout FAGOR- Quick-change steel holder- rapid clamping boring chuck RÖHM 1-13 mm- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 91920 €: 1737.29 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 M: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine ...

: neu : Bulgarien : 115600 €: 2184.84 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 M: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6. ...

centre height: 190 mmcentre distance: 1200 mmturning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning dia. in gap: 475 mmspindle bore: 59 mmspindle turning speed range: 35-2000 U/mintotal power requirement: 5,5 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: LBH 2,5 x1,0x1,4 mVery well-maintained machineIncludes FAGOR digital readoutIncludes rapid traverse via joystickIncludes central lubricationIncludes Multifix tool system with 3 cassettesIncludes chuck with additional jawsIncludes center pointIncludes documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 900 mmturning length: 5000 mmcontrol: SIEMENS SINUMERIK 840 D cross travel: 530 mmswing diameter over slide transversal: 650 mmbed width: 970 mmfeeds:: X/Z Achse 10 m/minturning speeds:: 0-600 U/minforward bearing diameter: 140 mmw-axis: Mit Reitstock Inkl.chip conveyor: kWtotal power requirement: 58 kWweight of the machine ca.: 20 tdimensions of the machine ca.: 11.2 x 2.9 x 2.2 mOptional Equipment – Included in the Price4-jaw independent chuck, Ø 600 mmHydraulic steady rest SHW Autoblock SLU-5-ZS, clamping range Ø 45 – 310 mmFixed steady rest, Type C”, Ø 250 mmV-axis with CNC-controlled longitudinal movement (Z-axis) for automatic positioning of the SHW Autoblock steady restHeadstock-type steady rest with 4-jaw independent chuck, Ø 500 mm, bar capacity Ø 250 mmAir conditioning unit in the electrical cabinetLongitudinal chip conveyorBoring bar ho ...

centre distance: 2000 mm: 600 weight of the machine ca.: 3,2 tPassage 49 mm DigitalLynetteThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 250 mmcontrol: SIEMENS SINUMERIK 820 T swing diameter: 380 mmchucking diameter: 250 mmx-travel: 200 mmz-travel: 250 mmspindle turning speed range: bis 4000 U/minrapid travel - longitudinal/face: 15 m/mintotal power requirement: 27,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,2 x 2,9 x 2,2 macc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1000 mmcontrol: FAGOR control: CNC 8055/B-T centre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 210 mmbed width: 300 mmspindle bore: 65 mmspindle turning speed range: 0 - 3000 U/mintransmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/minfeeds - cross: 0 - 10.000 mm/minrapid travel - longitudinal/face: 15 m/mintailstock quill diameter: 68 mmtailstock quill stroke: 155 mmtailstock taper MT: 4 total power requirement: 8 kWweight of the machine ca.: tdimensions: 3,1 x 1,9 x 1,78 mAccessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 16 mmspindle passage: 16 mmturning length: 160 mmcontrol: GE FANUC Series 18 i-T spindle turning speed range: 8000 U/minrapid traverse: 30 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 2,1 tAccessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm), chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1.600 mmswing diameter: 2.000 mmturning height: 1.400 mmControl: Fanuc max. Torque: 23.863 Nmcutting capacity: max. 3.000 kgfmax. workpiece weight: 10.000 kgtable:: table diameter: 1.600 mmtable speeds: 0,7 - 280 1/minpower capacity - table: 37/45 kWC - Axis:: resolution: 0,001 °Working speed: 0 - 1.200 °/minmax. table speed: 3,333 1/minturret slide:: Shank diameter: 32 mmspindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1power capacity - Tool Spindle: 15 / 18,5 kWmax. Torque: 235 Nmram cross section: 220 mmaxis stroke:: x-axis: 1.900 mmz-axis: 900 mmcross rail adjustment: 700 mmTool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos.max. tool weight: 50,0 kgdraw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/minfeed speeds: max. 7.500 mm/minrapid traverse of the crossrail: 300 mm/mintotal power requirement: 80 kVAweig ...

--- Main- / Counter- spindle ---: - - - - - -hollow: 20 mmturning speeds: max. 8.000 U/mincontrol: Fanuc Turning Automatic Lathe - swiss lathe | HANWHA - XD 20 equipped with an LNS Express 220 (2007) bar feeder.The machine has 26.457h processing time hours.A machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: XD-20 | XD20The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

--- Main- / Counter- spindle ---: - - - - - -hollow: 20 mmturning speeds: max. 8.000 U/mincontrol: Fanuc Turning Automatic Lathe - swiss lathe | HANWHA - XD 20 equipped with an LNS Express 332 (Bj. 2006) bar feeder.The machine has 26’457h processing time hours.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: XD-20 | XD20The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 127060 €: 2401.43 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 240 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8050 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 112 010,00 turning length4.000 mm € 135 240,00  ...