lathes used for sale (3,096)

Machine number: 0307-1866Operating voltage: 400 VFrequency: 50 HzRated current: 315 AOperating hours: 9316Control: SIEMENS SINUMERIK 840 DslWorking height: approx. 1300 mmWorkpiece length: min. 780 mm/max. 3000 mmWorkpiece diameter: min. 20 mm/max. 200 mmmax. workpiece weight: 250 kgWorkpiece drive/voltage: 2 x hydraulically operated front end chuck, manufacturer SAVmax. chuck passage: diameter 210 mmSpindle power: 2 x 37 kWSpeed: 2200 rpmCarriage PathsCross Slide NC1 - left:X1 axis: 450 mmZ1 axis: 1980 mmCross slide NC2 - right:X2 axis: 450 mmZ2 axis: 1980 mmM - head - slide - left Q1 - axle: 1980 mmM - head - carriage - right - Q2 - axle: 1980 mmtailstock carriage + steady rest - left W1 - axle: 1980 mmtailstock carriage + steady rest - right W2 - axle: 1980 mmmax. rapid traverse speed: 20 m/minincl. PROMAT gantry loading systemwith two loading unitsas well as chip conveyor and coola ...

Serial number: 07400003691operating hours read: 88,040Spindle hours read: 43,558Spindle speed range: 3200/5000 rpmRotation diameter: 270 mmTurning diameter: 120 mmSpindle distance: 900 mmTravel X1: 290 mm TravelZ1: 650 mmTravel X2: 180 mmTravel Z2: 650 mmTravel Y1: +- 40 mmTravel Z3: 670 mm TravelX3: 175 mmMax. rod diameter: 100/104 mmSpindle bore diameter: 118 mmRapid traverse speed X- and Z-axis: 30 m/minRapid traverse speed Y-axis: 15 m/minNumber of driven tools per tool carrier: 12Control: SIEMENS SINUMERIK 840 D POWERLINEincl. chip conveyorwith 2 tool turrets - each with 12 tool positionsmain and counter spindles, as well as foot switchesAttention, the machine has the following defects:-the B-axis is defective (sits on turret 1)-the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crookedin the range of 0.03 mm (would have to be remeasured), sporad ...

bar material dia.: 20 mmspindle passage: 24 mmturning speeds: 10.000 U/minturning length: 350 mmControl: CNC Yaskawa Siemens 840Di c-axis: 0,01° °gripping station: 20 mmc-axis: 0,01° °speeds: 10.000 U/minrapid traverse: 20 m/minturret (x-stations): 3 x 8 + (3x Y-Achse) total power requirement: 5,5 kWweight of the machine ca.: 4.850 tdimensions of the machine ca.: 3,2 x 1,75 x 1,9 mdriven tools: 3 x 8 bar loader: FMB high pressure pump: ja/yes parts conveyor: ja/yes option long parts: ja/yes CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: 01190000341Operating voltage: 400 VFrequency: 50 HzConnection: 58 kVARated current: 100 AHours read: 57,730Control: HEIDENHAIN CNC PILOTTurning length: 1000 mmRotation diameter over bed track cover: 680 mmRotation diameter over plane guide cover: 455 mmPlane travel: 320 mmLongitudinal travel: 1097 mmMain spindle spindle diameter: 220 mmSpindle head diameter in front bearing: 140 mmSpindle bore: 107 mmChuck diameter: 400/500 mmSpeed range: 4 - 2800 rpmC-axis Speed: up to 100 rpmFeed force in X-axis: 8 kNFeed force in Z-axis: 15 kNRapid traverse in X: 24 m/minRapid traverse in Z: 30 m/minincl. 12-cavity tool turretincl. the tool holders located in the tool turretincl. a three-jaw chuck from the manufacturer FORKARDT, diameter: 300 mmalso a workbench with documentation, as well as a chip conveyor and an extraction system Auction-ID: A7-49089-331

Machine number: 313154Operating voltage: 400 VFrequency: 50 HzRated current: 64 AConnection: 44 kVAControl: GRUNDIG ELTROPILOTCirculation diameter over bed track cover: 570 mmCirculation diameter over plan guide cover: 420 mmPlane travel: 220 mmLongitudinal travel: 635 mmMain spindle Spindle head diameter: 170 mmSpindle diameter in front bearing: 120 mmSpindle bore: 79 mmChuck diameter: 200/250 mmSpeed range: 25 to 5000 rpmC-axis Speed: 100/minHolding torque: 200 NmPitch accuracy: 0.04°Rapid traverse speed X-axis: 20 m/minRapid traverse speed Z-axis: 24 m/minincl. 12-fold tool turret, 6 of which are drivenTailstock diameter in the front area: 80 mmTailstock Travel: 515 mmTailstock mount: MK 4The machine is equipped with a tailstock as well as the tool holders located in the tool turret and a three-jaw chuck, diameter: 200 mmReference: Hanon - Lot 25 Auction-ID: A7-49056-12

Spindle speed: from 21 to 1500 rpmSpindle passage: approx. 78 mmCenter length: approx. 1800 mmCenter height above bed: approx. 300 mmTurning diameter over bed: approx. 600 mmCenter height over support: approx. 200 mmTurning diameter over support: approx. 400 mm, the machine is equipped with a tailstock, a turning steel holder and a four-jaw chuck from the manufacturer RÖHM, diameter: 350 mmReference: STS - Lot 9 Auction-ID: A7-49056-250

Machine number: 650032Operating voltage: 400 VFrequency: 50 HzNominal current: 140 AConnection: 80 kWHours read: 12,654Control: SIEMENS SINUMERIKTurning length: 2000 mmTravel X-axis: approx. 230 mmTravel Z-axis: approx. 1400 mmTool holder: VDI 40The machine is equipped with a 12-fold turret and a rotating steady rest from the manufacturer SMWas well as a three-jaw chuck from the manufacturer RÖHM, Diameter: 320 mmincl. another rotating steady rest, as well as a batch of jaw chuck with 3 pieces each, diameter: 320 mm, 320 mm and 320 mmalso with extraction system and a chip conveyor and documentation Auction-ID: A7-49089-325

Machine number: 1324Operating voltage: 380 VControl voltage: 220 VConnection: 3 kWRated current: 25 AFrequency: 50 HzSpindle speed: from 22 to 2800 rpmSpindle passage: approx. 42 mmTip length: approx. 700 mmCentre height above bed: 170 mmTurning diameter over bed: 340 mmCentre height over support: 100 mmTurning diameter over support: 200 mmThe machine is equipped with a tailstock, a Multifix turning steel holder, type B, as well as a three-jaw chuck from the manufacturer RÖHM, diameter: 150 mm, as well as a digital display from the manufacturer ELESTA, type: VISULESTA 4incl. matching workshop drawer cabinet with matching accessories for the machineReference: Showroom Auction-ID: A7-49056-34

Machine number: 34101101Operating voltage: 400 VRated current: 128 AFrequency: 50 HzPower: 89 kVA Operatinghours read: 2782Turning length: 3000 mmCenter height above floor: 1270 mmCirculation diameter over slide top: 520 mmCirculation diameter over telescopic left: 520 mmCirculation diameter over steady rest slide: 520 mmMain spindle left, spindle diameter in front bearing: 160 mmSpindle bore: 77 mmSpindle speed: 4000 rpmTorque: max. 630 Nmtailstock moving built-in centering tip: MK 5tailstock Quill diameter: 135 mmStarting force: 200 to 1200 daNMax. workpiece weight: 1000 kgTurning-drilling-milling unit Drive power: 15 kWTorque: max. 190 NmTool holder: HSK 63The machine is equipped with a tailstock, a moving steady rest SMW Autoblock and a three-jaw chuck RÖHM, diameter: 310 mmincl. matching workshop cabinet and workbench with large items Documentationmax. tool length: 500 mmmax. tool  ...

Machine number: 9611-1806Operating voltage: 380 VFrequency: 50 HzControl voltage: 220 VControl: SIEMENS SINUMERIKCenter height: 1240 mmMax. turning length: 2000 mmSpindle bore: 130 mmMax. chuck diameter: 130 mmMax. torque: 460 NmTool holder: VDI 40Plan stroke: 200 mmTailstock Quill cone: MK 5Quill diameter: 90 mmMax. quill stroke automatic: 150 mmIncl. workshop cabinet and large batch VDI 40 tool holdersalso coolant system and loading systemAttention: the machine can be transported on a standard truck ! Auction-ID: A7-49089-190

Machine number: 431Operating voltage: 460 VFrequency: 50 HzConnection: 33 kWRated current: 56 AReading operating hours: 18,538incl. the clamped tool holders and tools shown in the photosControl: TRAUB SYSTEM TX 8iMain spindle:Rod passage: 36 mmMax. speed: 6300 rpmDrive power at 100/40% Working cycle: 6.7/10.7 kWTorque at 100/40% Working cycle: 21/32 NmTool turret top:Number of tool stations: 12X-axis travel: 50 mmY-axis travel (option): +-20mmZ-axis travel: 100 mmRapid traverse X/Y/Z: 15/15/15 m/minX/Y/Z measuring system resolution: 0.0005/0.001/0.001 mmInput force X/Y/Z: 4240/4240/4240 NFront unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmX-axis travel: 370 mmZ-axis travel: 250 mmRapid traverse X/Y: 30/30 m/minInput force X/Z: 2800/2120 NMeasuring system resolution X/Z: 0.0005/0.001 mmRear unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmTravel X-axis: 73 mmTr ...

: neu : Bulgarien : 42910 €: 819.58 €: 400 mm: 750 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 4 : 18-98, 48-265, 144-790, 3 U/Min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 7.5 kW: 1530 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Machine number: 344Operating voltage: 460 VConnection: 33 kWRated current: 56 AControl: TRAUB SYSTEM TX 8iMain spindle:Bar passage: 36 mmMax. speed: 6300 rpmDrive power at 100/40%Working cycle: 6.7/10.7 kWTorque at 100/40%Working cycle: 21/32 NmTool turret head top:Number of tool stations: 12 TravelX-axis: 50 mmTravel Y-axis (option): +-20mmTravel Z-axis: 100 mmRapid traverse X/Y/Z: 15/15/15 m/minResolution of the measuring system X/Y/Z: 0.0005/0.001/0.001 mmInput force X/Y/Z: 4240/4240/4240 NFront unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmTravel X-axis: 370 mmTravel Z-axis: 250 mmRapid traverse X/Y: 30/30 m/minInput force X/Z: 2800/2120 NResolution of the measuring system X/Z: 0.0005/0.001 mmrear unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmTravel X-axis: 73 mmTravel Y-axis: +-50 mmRapid traverse X/Y: 15/15 m/minInput force X/Z: 4240/4240 NResolution  ...

Machine number: 833544Operating voltage: 380 VSpeed: from 950 to 1400 rpmRated current: 5.9 to 9.2 AJaw chuck diameter: 160 mm Auction-ID: A7-49089-380

Speed: from 110 to 3600 rpmCenter length: 400 mmCenter height above bed: 130 mmReference: Living - Lot 17 Auction-ID: A7-49056-209

turning diameter: 650 mmturning length: 1500 mmcontrol: OSP-P300SA -L Main Spindle:: main spindle speeds:: 4200 spindle motor: 32/22 kWdiameter of main spindle: A2-8 mmtravel -x axis: 644 mmtravel -z axis: 1600 mmtravel -y axis: 300 (+/- 150) mmrapid traverse: 50 / 40 / 50 m/minmilling spindle: 12.000 U/minspindle motor: 22/15/11 kWspindle bore: 130 mmc-axis: 360 °b-axis: 240 °2nd Spindle:: Subspindle Power: 22,4 kWspindle turning speed range: 5000 U/minW-axis (spindle longitudinal): 1584 mmspindle nose: A2-6 total power requirement: kWCNC turning & milling center - equipped with:- CNC control OSP-P300SA-L THINC Control, Full 5-Axis, - Contouring B-Axis Milling Spindle (12,000 RPM, CAPTO C6)- Y-Axis- LOWER TURRET (STATIC)- BIG BORE (3.1” BAR CAPACITY – MAIN SPINDLE)- 2-SPEED GEARBOX- ROYAL QG-80 COLLET CHUCK (MAIN)- ROYAL QG-65 COLLET CHUCK (SUB)- C-AXIS SYNC (BOTH SPINDLES)- 80 ...

Circumferential diameter over bed cover 570 mm | Rotation diameter over face slide 420 mm | Longitudinal stroke: 635 mm | Plan stroke: 220 mm | Spindle bore: 79 mm | Center width: 1000 mm | Chuck diameter: 250 mm | Feed speed longitudinal/flat: 0.0025-24,000/ 0.0025-20,000 mm/min | Feed force longitudinal/plan: 7,000/3,500 N |Heidenhain CNC Pilot | Accessories: 3 jaws, various tool holders Documentation available Auction-ID: A7-48995-3

- Face plate 4 Chuck 3200 mm- Displacable table for swing 5100 mm- ATC tool chnager 16 positions- Heavy Duty Jaws- Table load 60.000 Kg- Power 75 kW - ex Aero Space - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways-  Displaceable table hydraulic / manuel - Circular interpolation 

greates pass round over bed: 650 mmSwing dia. over traverse guideway: 420 mmDistance between centres: 2.000 mmcontrol: Sinumerik Siemensslide travel X-axis: 440 mmslide travel Z-axis: 2.000 mmMain spindle:: turning speed range - main spindle: 1 - 3.000 min/-1power capacity - main spindel: 33 / 27 / 22 kWtransmission ratio: 2 spindle diameter in front bearing: 140 mmspindle bore: 106 mmstandard chuck diameter: 250 - 400 mmspindle head: DIN 55026 / A8 turret head: 12 pos.turning tool - shaft cross cut: 32 x 32 mmfeeds:: rapid traverse: X: 5 m/minrapid traverse: Z: 10 m/minfeed range: X: 0,001 - 1.000 mm/minfeed range: Z: 0,001 - 2.000 mm/minpower feed coss: 9.000 Npower feed longitudinal: 12.000 NTailstock:: diameter of quill: 100 mmquill travel: 200 mmtaper of center: MK 6 total power requirement: 38 kWweight of the machine ca.: 6,0 tdimensions of the machine ca.: 6,0 x 2,5 x 2,0 mCool ...

Maximum turning diameter: 3800 mmMaximum swing diameter: 3800 mmdiameter of spindle flange: 1900 mmcontrol: Siemens 840 D sl Table rpm: 100 1/minMaximum speed of driven tools: 6000 1/minx-travel: 2800/3200 mmz-travel: 1000 mmFeed - X: 20 m/minfeed capacity - x: 22 kNtool taper: CAPTO C8 total power requirement: 280 kVAdimensions of the machine ca.: 10,4 x 6.3 x 5,7 mweight of the machine ca.: 155 tEquipment/Accessories: - 2 tool changers, each with 60 positions- 2 x chip conveyors- Coolant system, 6 bar- High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM- internal coolant supply- Hydraulic unit - Automatic door - Electric handwheel - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mmturning length: 1100 mmcontrol: Pfillips 432turning diameter over slide rest: 420 mmspindle turning speed range: 3000 U/minspindle passage: 82 mmTool changer: 12 tool taper: VDI 40 total power requirement: kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with M ...

turning diameter over bed: 980 mmturning diameter over slide rest: 720 mmturning length: 7000 mmbed width: 620 mmturning speeds: 1,8-355 U/minfaceplate diameter: 800 mm: turning dia. in gap: 1000 mmlength of gap: 350 mmquill stroke: 900 mmspindle hollow: 80 mmweight: 20 tsteady: 600 mmsteady: 480 mmsteady: 480 mmDistance between the canter 7000mmFaceplate diameter 1400urning diameter in the offset 2450, length 940 mmTravel over support 1200Over support with autom. travelThe tech. Data are manufacturer or operatorinformation and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contac ...

turning diameter: 580 mmturning length: 1600 mmcontrol: Siemens 810 Tturning diameter over slide rest: 320 mmspindle passage: 85 mmTool changer: turning speeds: 12,5-4000 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: 170 mmtail stock: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mMachine has been overhauledThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.  ...

turning diameter: 600 mmturning length: 1500 mmcontrol: C200 T turning diameter over slide rest: 425 mmspindle passage: 100 mmTool changer: live tooling: turning speeds: 10-2800 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: tail stock: c-axis: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mSpeed monitoringThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. ...

turning diameter over bed: 435 mmturning diameter over slide rest: . mmturning length: 750 mmturning speeds: U/mindigital readout: digital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- Accessories available.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution o ...

turning diameter over bed: 3800 mmturning diameter over slide rest: 3200 mmturning length: 12000 mmfaceplate diameter: 3100 mmsteady: 2 bed width: 4000 mmturning speeds: 200 U/minworkpiece weight: 90.000 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHydrostatik SpindellagerungHydrostatik LynetteThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch ...

turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 1500 mmspindle bore: 55 mmfaceplate: 550 mmsteady: 140 turning speeds: 40-1800 U/mindigital readout: Haidenhain bed width: 340 mmsteady: 140 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 62The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus H ...

turning diameter over bed: 1100 mmturning diameter over slide rest: 650 mmturning length: 3500 mmspindle bore: 108 mmfaceplate: 1000 mmsteady: 500 Control: Siemens type: 840 D bed width: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mOptional Chip conveyor can be purchased as an option for €7,500The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.You ...

turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 1500 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 40-1800 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 63The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for thi ...

turning diameter over bed: 950 mmturning diameter over slide rest: 569 mmturning length: 2200 mmspindle bore: 90 mmfaceplate: 800 mmsteady: 500 bed width: 580 mmRapid travel: turning speeds: 800 U/mindigital readout: stepless reg. with elect. turning speeds: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500No. 19276The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. ...