other metal working machines used for sale

indexing:Länge =< 1050 mmtable::Teilungslänge =

Genesis IPG Type YLR-1500-WC Spavarka laserowa Numer seryjny: PLMP32200563 Data produkcji: 2022 Moc lasera: 1.5kW BOFA AD2000-IQ Wyciąg oparów Numer seryjny: 50171178001 Data produkcji: 2022 Computer: Dell Precision 5820 IPG LC71.01-A.4.5/6 Agregat chłodniczy Numer seryjny: PC220200019 Numer katalogowy IPGP: CCH71A11UXXDEXU Data produkcji: 2022 Zasilanie: 400/480 V, 3-fazowe, 50/60 Hz Zabezpieczenie nadprądowe: 30 A / Type 1 Znamionowy prąd pełnego obciążenia: 16/17 A Prąd silnika: 5.5 A Chłodziwo: R407-C, 2.2 kg Wydajność chłodzenia: 5.5 / 5.9 kW Ciśnienie maksymalne robocze: 30 bar Schemat elektryczny: P35-001221 Odporność zwarciowa: 50 kA Panel sterowania

bore capacity in steel (diameter): / mmthroat: / mmbore stroke: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 zone cleaning system with process monitoring, filter technology and bath analysis via conductivity measurement. Demineralised water required, waste water disposal required. Temperature and time control. On-site inspection of the system is possible by prior arrangement.-0 kguncheckedex foundation, unpackaged

Cell with pick-and-place robot Model: KUKA 3 D1200 HM/SEL Quantity: 24 Targets Year of production: 2021 Lifting capacity: 3 kg Reach: 1200 mm Control: KR C5 KSP

MIR 4-wheel robot with Gibas body and loader

Max reach 2101 mm Rated load 30 kg Maximum load capacity of 36 kg Year built: 2004 Controls: CRC2

Model: EL390/1301 Quantity: 8 pieces Year of production: 2021 Travel 8000 mm Length 9000 mm

Robot 6-axis ABB IRB 2400 Arm range: 1550 mm Control: IRC5 Camera System Evolut Teach pendant Payload: 12 kg

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

x-travel: 8000 mmy-travel: 3750 mmz-travel: 1500 mmdistance between columns: 3250 mmtable-size: 8500x2500 mmT-slots: 29(22H12) table weight: 25000 Kgengine: 37 kwturning speeds: 6000 U/minControl: TNC-530 HSCI taper ISO: DIN 69871-ISO 7388 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 81500 €: 1540.35 €: 8 mm: 5 mm: 80 mm: 10 mm: 4500 mm: 720 mm: 95 (R 80) / 35 (R 25) mm: 11 kW: 4900 mm: 1700 mm: 2700 mm: 4550 kgincl. flanging rolls for mild steel (R25)incl. cutting bladetop and lower roll driven by hydromotor and plantary gear boxpossible to flange both, flat and crowned bottomshydraulically adjustable bottom heightcutting and flanging on the same headlateral support rollsoperator panel with touch screenOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 220 mmcontrol: Fabnuc OSPL 500 L turning diameter: 150 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A ZNC Huber start hole drilling machine is available. Travel X/Y/Z: 350mm/250mm/350mm, electrode diameter range: 0.1mm-3mm, max. workpiece weight: 250kg, machine dimensions X/Y/Z: approx. 1100mm/1000mm/2000mm, weight: approx. 800kg, control: ZNC Drill EDM. Documentation available. On-site inspection is possible.

Three IEMCA bar feeders are available. Bar diameter: 42mm, guide channel: 44mm, max. bar length: 3000mm, feed rate: 750mm/s, machine dimensions X/Y/Z: approx. 4000mm/800mm/1400mm, weight: approx. 850kg. On-site inspection is possible.

Bauer 300 mm

Bimak Mk3Admission in drilling-spindle (morse): Mk3 Max drill capacity: 35 mm SPEEDS: 55 > 1000 rpm

maximale ronde: 310 mm maximale vierkant: 500 x 300 mmDepth of throat: 310 mm Max height of workpiece: 310 mm Sawspeed: 20 > 140 m/min Length of band saw: 5000 x 34 x 1,1 mm Power needed: 4 kW Length : 3000 mm Depth : 1500 mm Height: 1900 mm Weight: 2200 kg

Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg

Measuring machine Zeiss WMM850 BJ 1988 generalueb. 2008

Surface Grinding Machine Aba FF450/30 BJ 1980

Measuring Machine Brown Sharp Vento BJ 2000

Measuring machine Zeiss Prismo 7 BJ 1997 generallueb. 2024

The Rösler RMBC 2.1L troughed belt batch blasting machine was specially designed for the economical batch blasting of small to medium-sized bulk materials. Thanks to its circumferential trough belt, it ensures uniform mixing of the blasting material and thus particularly efficient and gentle cleaning. The system impresses with its robust and maintenance-friendly design as well as its compact design, which enables flexible use even in confined spaces. The offered machine is in excellent technical condition. All wear parts were replaced in the course of a general overhaul – including manganese lining, bearings, turbine parts and the trough belt. This means that the system is in no way inferior to a new machine – with a significantly lower investment.

The Rösler RMBC 2.1L troughed belt batch blasting machine was specially designed for the economical batch blasting of small to medium-sized bulk materials. Thanks to its circumferential trough belt, it ensures uniform mixing of the blasting material and thus particularly efficient and gentle cleaning. The system impresses with its robust and maintenance-friendly design as well as its compact design, which enables flexible use even in confined spaces. The offered machine is in excellent technical condition. All wear parts were replaced in the course of a general overhaul – including manganese lining, bearings, turbine parts and the trough belt. This means that the system is in no way inferior to a new machine – with a significantly lower investment.

Zeiss Pro T advance 16/21 measuring machine

Measuring machine Wenzel RS Plus BJ 2016

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (right) Max. feed length: 6,000 mm Pneumatic parking brake

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019