17 Heat exchangers used for sale

Manufacturer: Tetra Pak Model: Spiraflo Heat Exchanger Design: Shell-and-tube heat exchanger with spirally guided process tubes Material: Stainless steel complete Pumps: Multiple Grundfos stainless steel high-pressure pumps (type not clearly readable) Fittings: Siemens flow/temperature sensors FT01 / TT02 visible Control: Stainless steel control cabinet integrated Application: Heating/cooling of viscous and liquid foods Typical products: dairy products, sauces, vegetable fats (Upfield plant) Particularities: – Very large heat exchanger area (several levels of coils) – Industrial hygiene standard (CIP-capable) – Complete piping module including pumps, valves, measuring sensors – Signage "Disklösning" = CIP cleaning system available Location: Helsingborg (Sweden)

Supply air unit with heat exchanger Fabr. Huber + Ranner Type Fe-Vz/9, air flow rate 10,000 m³/h Motor power 0.8 KW ex, Fan speed 2,650 rpm

Supply / exhaust air unit Fabr. Huber + Ranner Type Va-m-V2/8, Fabr. No. A92707/2 ZuP.1 Air flow rate 7,500 m³/min., engine 4 Kn = 1,500 rpm. Fan speed 2,600 rpm combined with: Va-m-V2/8; No. A92 707/2 P1-A1 Motor 3 KW; n = 1,500 rpm Fan speed 2,650 rpm Air capacity 7,500 m³/h

2 pcs ONDA Plate Heat Exchanger CT 354/S The heat exchangers are part of a refrigeration centre with three chillers, which are also for sale. They were used for the hydraulic separation between the chiller circuit and the heating/heat recovery circuit. Manufacturer: Onda Type: CT 354/S Year of Make: 2009 Location: Schierling Viewing possible in the week between 10/11 and 14/11 by appointment.

Sealed plate heat exchanger for a wide range of applications Manufacturer: Alfa Laval Type: M15 BFM Year of Make: 2010 Number of pieces: 2 pcs. Volume: 176 l Pressure: 10 bar Location: Helsingborg Visits possible by appointment from Monday to Friday.

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

Screwed plate heat exchanger 300 KW, 60 sqm heat exchanger area

2 PIECES HEAT EXCHANGER TYPE PLATE HEAT EXCHANGER at call Tel.01715213204

Alfa Laval plate heat exchanger Aqua first Very little used Included isolation protection box

GEA Heat Exchanger NT 50 T CDS-10 for sale.

Available in stock 1 x Used Vicarb Heat Exchanger, model V45. Plates are stainless steel AISI 316. Frames are mild steel, painted. The equipment is used but in good working conditons. REP : 708 kW A MAXI: 165 mm A MINI: 159 mm Dimensions: 50cm x 53cm x 165cm (WxLxH) Weight: 540 kg

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm

heat exchanger Tube bundle heat exchanger LWH: 3200 x 750 x 1250 mm

No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

Plate heat exchangers GEA NT150L B-10, 1491 kg, 356 l press content, year 2009, very good condition, max. 13 bar,.