textile machines used for sale (339)

used Camoga C520L+AS. Leather Spilitting Machine. Camoga 520L+AS. New in 2016, light use since 2023. 520mm working width.

used JB Hyde Harness Braider Braider. Harness Braiding Machine Type 32C No4 Manufacturer: JB Hyde 9½ inch centre hole Harness Braiding Machine Type 48C No4 Manufacturer: JB Hyde 19½ inch centre hole Harness Braiding Machine Type 16C No5 Manufacturer: JB Hyde 4½ inch centre hole Harness Braiding Machine Type 24C No4 Manufacturer: JB Hyde 5½ inch centre hole All fitted with: Foot control switch for stop / start and magnetic take off clutch All carriers fitted with rollers suitable for tubes or bobbins All machines fully guarded

used Sulzer TW11 130 TW11 Serial 45000 to 69000. 32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition

used Mueller MBJ3 - 1152 Hooks. Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

used Barmag POY MICROFILAMENT Synthetic extrusion spinning line. BARMAG POLYESTER EXTRUSION -SPINNING LINE WITH 12 POSITION / 72 THREADLINES FOR POLYESTER POY MICROFILAMENT YARNS • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 44 ...

used WELKER 9200l Yarn bobbin steamer - autoclave. AUTOCLAVE (USED FOR ALL TYPE OF YARNS) , FULLY AUTOMATIC VACUUM - STEAMER WITH AUTOMATIC TRANSPORT SYSTEM ‘P’ MAKE : WELKER ( GERMANY) Y.O.C. : 1987, Reconditioned 2002, later used for couple of more years, then preserved ! VOLUME : 9200 L MAX. TEMPERATURE : 150˚C WORKING LENGTH : 4000 MM DIA ( WITHOUT INSULATION) : 1600 MM DIA WITH INSULATION : 1720 MM

used SULZER G6200 S 190 N8 SP - SPECIAL. SPECIAL EXECUTION FOR CARBON OR TECHNICAL FABRICS ! WEAVING MC WITH CREEL & SUCTION UNIT , SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION

used Somet Thema Thema E11 Year 1993-94. 20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

used KARL MAYER RS-3-MSUS-V Warp Knitting. KARL MAYER RS-3-MSUS-V RS MSUS-V High-performance warp-knitting machine with course-oriented weft insertion for the production of heavyweight fabrics and composite fabrics GEO-TEXTILE FABRIC 540CM 6 gauge Year 2007 Serial number 96700 Running condition (Currently producing fabric for bullet proof jackets) Product features • Production of grid structures or closed fabrics • Combination with substrate fabric according to the product application • Strong knitting elements and yarn feeding guides for the processing of thick, high-performance yarn materials • Special feeding elements for the production of fabrics with fiberglass, carbon and other high-performance fibers possible Karl Mayer Warping beamer DS 21/30 Year 1997 Running condition and video is available

used ATOM () HS 520/3. Cart beam punching machine / travelling head die cutting press 25 ton, 1600 x 500 mm, punching head 500 x 500 mm with 2-hand touch triggering, with light curtain approx. 1500 kg

used Aiki, 211B texturing machine. One mother yarn texturing machine for sale, manufactured by AIKI, Japan in 2014, 240 spindles, very good condition, still working now, Ans 37 sets of Slitting machines for sale, manufactured by Fijian, Chenge in 2014,very good condition, still working now. Serious buyers contact us.

used HY-6 texturizing machines. We have 6 Hongyuan HY-6 texturizing machines for sale,V-type,manufacture year:2011,240 spindles,with airjets,unitens,pneumatic yarn feeders PU discs,godets drawing,same like Barmag EFK texturizing machine..still working now.Very good condition.Sirous buyers contactus,please. We have many brands, models, years texturing machines, tell me what you need seriously!

used TMT TI 615 1500/32. We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

used Trutzschler Spunlace. Now we have 2 spunlace lines, One manufactured by TSUSCHLER in 2013,ww: 3500mm,Another one manufactured by ANDRITZ in 2016 ww: 2750mm. If you interest in these lines, do not heisitate to contact us.Thanks.

used Barmag FK6-1000V fiber preparation machines. We have 2 Barmag FK6-1000V texturing machines, double friction unit, manufactured in 2014, 2x240 spindles. individual morter friction units, pneumatic yarn pusher, double W2 roller, Barmag unitens, A,B side individualm control, very good machines. price $300000/set FOB China. We also have 1 Yuejian YJ-1000 double friction texturing machine available for sale, manufactured in 2018, 2x 288 spindles, double W2 roller, PU disc, airjet, A,B side individual control, shaft drive, very good condition. price $200000 FOB China

used Barmag FK6-1000V fiber preparation machines. We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.

used Chonglee High tenacity 1200/8/4 Yarn manufacturing. Complete Chonglee High tenacity yarn ( Both PET and PA) spinning lines available for sale, manufactured by Chonglee in 2012, consist of 7 individual line, 4/8 ends winder, chuck length, 1200mm, 4/8 ends changable,10 / 8 hot godets, each pos. has 8 packs & spinnerets, 90mm,5.0 meter, can spin 400-1500d yarn, strength 9.2-9.5 gpd, Total 27 positions. from extruder to winder. Stopped 2 months, just complete refurbished last year, very good condition, can be soldl separately; A. line: with 6 pos, 150mm extruder, 10 godets B. line with 4 pos., 135mm extruder, 10 godets C. line: with 4 pos.135mm extruder, 10 godets D. line: with 1 pos.105mm extruder, 10 godets E. line: with 6 pos.150mm extruder, 8 godets F. line: with 3 pos.120mm extruder, 8 godets G. line: with 3 pos.120mm extruder, 8 godets Serious buyer contact us. serious bu ...

used Plantex Yarn manufacturing. We can offer 2 complete BCF spimming lines, eachline has 6 positions, manufactured by Plantex, Italy in 1996, can produce PP, PA yarn, 1~3 color, 1000~4000d, working condition. Seriou buyers contact us.

used Barmag CW-5T,HF6 yarn manufacturing. We can offer Barmag FDY lines, winder model: ACW-5T, 1380mm/12 ends, hot godets model HF6, All ground floor equipments, just dismantled into warehouse.very good condition.Serious cintact us.

used TMT TI 615 1500/32 FDY spinning lines, Twins winders. We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

used BARMAG POY CW-4T POY spinning Lines. We have complete Barmag POY spinning lines, YOM 2004, 2 kinds of widers, ACW 4T 1200/8, ACW 1500/10. each model 48 pos. available very good condition. Serious buyers contact us.

used BARMAG FK6-1000V TEXTURIZING MACHINES. We can offer you 5 x Barmag FK6-1000V texturizing machines,manufactured in 2019,240 spindles,with spandex(lycra) device,still working,good maintenance. We machinery dealer of Polymwerization,POY,FDY,DTY,Staple,Nonwoven amd spare parts. We have many brands and models machines, tell me what you need seriously!

used TEXTURIZING MACHINES HY-6 HONGYUAN,CHINA. We have 6 Hongyuan HY-6 texturizing machines for sale,V-type,manufacture year:2011,240 spindles,with airjets,unitens,pneumatic yarn feeders PU discs,godets drawing,same like Barmag EFK texturizing machine..still working now.Very good condition.Sirous buyers contactus,please. We have many brands, models, years texturing machines, tell me what you need seriously!

used Fleissner n.N Screen Drum Dryer. FLEISSNER, AB 3,500 mm, with 6 drums, 1,400 mm Diameter, built around 1985, but overhauled in 2008 and with new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW SIEMENS control S7 from 2008 with touch screen Motors with frequency converter, 50 m per minute, up to 250 °C

used Suchy N.N, Cooling calender, calibration calender. SUCHY, Nr 131/08, calibration unit, year of construction 11/2008, WOB 3700mm, 2 Coolable steel rollers, incl. 2 cooling units ERS, type SC 5.2V, temperature range +10...+32°C, useful cooling capacity per 6000W, embossing, smoothing and compacting different materials with high, uniform contact pressure and Precise temperature constancy

used cover machine. The cover machine is used for the fast and efficient covering of mattresses of all kinds. It is specially designed for foam materials, especially foam mattresses. The cores to be processed can also be covered with cotton wool fleece or tricot material. How it works: The mattress cores are placed on a roller conveyor table at the back of the machine and then fed to the two pressing belts arranged on the side. Thanks to their non-slip profile, the press belts reliably capture the cores and guide them through the conically shaped inlet. The kernels are compressed in width to such an extent that the cover, which was previously manually applied to the mouthpiece, can be pulled over it without any problems. The pair of belts transports the cores safely and evenly into the cover. Adjustment: The height adjustment is infinitely variable via a handwheel and allows easy ...

used Veit Tunnel Variant C+1+1 Type 8657. For sale is a Veit Tunnel Finisher 8657 with inbound and outbound transport Price from stock Külsheim 19.500 € In addition, the steam generator and compressor can be can be requested

used Veit clothing rack system. For sale is a clothing rack system over 2 floors, length 25 m; width 18m Semi-automatic filling with mobile carriages, can be loaded up to 100KG per carriage. The system has been dismantled by us and can be taken over immediately

used Pfaff 8304 Hot Air Welding Machine. Machine Type: Hot Air Welding Machine Manufacturer: Pfaff Type: 8304 Year of Make: 2002 Condition: used / in working order Offer will only be sent if a complete imprint is provided! Price 2.750 Euro incl. 19% VAT 2.310,92 Euro net Location Warstein , Germany Reference M-PFA-1125-4 DESCRIPTION We offer you a used hot air welding machine from the manufacturer Pfaff. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

used BARMAG CW6-1200 CRAFT WINDERS. 12 WINDERS, BARMAG CRAFT WINDERS CW6-1200/ 6 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

used Kraus und Reichert Kuris KVS700 Bumper Knife Machine Fabric Cutter Textile. Kraus and Reichert Kuris KVS700 Bumper Knife Machine Fabric Cutter Textile Item condition: Used and tested for function. _RD 6kg More textile machines - new and used - can be found in our shop! International shipping costs on request!

used UNIVERSAL MC - 740 PJ CNC flat knitting machine. Price 2 machines special price together €3000.--+ VAT (reclaimable) R1288 controlled flat knitting machine Universal Type MC- 740 PJ double-head machine knitting width approx. 2300mm also interesting as a spare parts carrier in terms of price Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

used Terrot UCC 548. The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibilit ...

used Schön + Cie 6005. Bridge punch of the company Schön, model 64035 / 92 The machine is fully functional.

used Atom G 888. Atom cart beam punch with 25t. The machine is fully functional.

used Schön + Cie 9050 SDF Leather Sharpening Machine. Shoe/Leather Goods Sharpening Machine with Table. The machine is fully functional.

used J. Sandt 8960 / 310582. Bridge punch from Sandt with 30t

used KIEFEL KQS 1450. Kiefel Roller Sheeter

used Camoga Cn 412 Leather Splitting Machine. Leather splitting machine Camoga Cn 412 with 40cm working width

used Camoga C 520 L. Leather splitting machine Camoga C 520 L with 50cm working width