presses for recycling used for sale

Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Year of Make: 2016 Hours: 1799 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or YouTube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be h ...

Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Year of Make: 2016 Hours: 2074 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or YouTube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be h ...

Baler Presona LP 50 VH1, built in 2009, press force 50 t, including perforator Specifications Manufacturer: Presona Sweden Type: LP 50 VH1 Year of Make: 2009 Press force: 50 t Drive: 22 kW Throughput rates with bulk density of 30 kg/m³: 6-7 t/h 50 kg/m³: 7-9 t/h 100 kg/m³: 11-14 t/h Filling opening: 1500 x 1100 mm Bale size: 1100 x 720 mm Volumetric weight: approx. 400-550 kg/m³ Binding: 5-fold Transport dimensions: approx. 8800 x 2200 x 2400 mm (LxWxH) Weight: approx. 18,000 kg Materials: paper, cardboard, foil, PET Accessories: Perforator The operating instructions and EC declaration of conformity are available in English. Remark: The machine has been reworked by us. The floor was renewed with Hardox panels, the plastic slide rails and rollers on the press car. It is in good condition and has been inspected and tested by us in 28816 Stuhr. You can fin ...

HSM baler, type HL 7009 Re, with lift-tilt device, year of manufacture 2016 Specifications: Manufacturer: HSM Type: HL 7009 Re Year of Make: 2016 Engine hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lift-tilt device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Remark: The machine is in very good condition. A new, original HSM master cylinder was installed. The press was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance.  ...

Presto HPK 50 HS baler, built in 2014 Specifications Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Hours: 3514 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Materials: paper, cardboard, foil, PET bottles Remark: The press is in good condition. The sliding and guiding plastics were renewed. We recommend replacing the knife/counter blade. The hydraulic hoses are from 2017. These should be replaced together with the filter. The operating instructions and CE declaration are available in digital form. Viewings, also under power, are possible at any ti ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 160 to: 6 mm: 1200 mm: 650 mm: 200 mm: 16 - 160 mm: 35 - 55 1/min: 740x420 mm: 8 : 100 mm: 330 mm: 690 mm: 15 kW: 1410 mm: 2220 mm: 3544 mm: 16000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 135100 €: 2553.39 €: 200 to: 1200 mm: 740 mm: 220 mm: 24 - 140 mm: 50 1/min: 950x600 mm: 100 mm: 390 mm: 15 kW: 2350 mm: 1700 mm: 3435 mm: 14900 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 106800 €: 2018.52 €: 160 to: 1100 mm: 700 mm: 210 mm: 15 - 110 mm: 60 1/min: 630x400 mm: 95 mm: 325 mm: 2400 mm: 1430 mm: 3200 mm: 9950 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 70 to: 4 mm: 920 mm: 500 mm: 180 mm: 12 - 120 mm: 50 - 80 1/min: 8 : 80 mm: 260 mm: 560 mm: 7,5 kW: 1225 mm: 1865 mm: 3060 mm: 7000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety controls- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 60400 €: 1141.56 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7.5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data baler:Manufacturer Riko Ekos d.o.o Type S-60K (5)Year of construction 2019Operating hours 673 hours, as of August 24Number of pressed bales 1,127 bales, as of August 24Pressing force main press 60 tonnesDimensions of feed chute 1,100 x 1,400 mmFilling volume / pressing cycle 2.1 m³Bale dimensions 720 x 1,100 mm (W x H), the length is variableDrive power 37 kWConnected load, total 47 kWTying 4-fold horizontal, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 5 - 6 tonnes/hourBulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hourBulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hourFilling volume of hydraulic oil tank 800 litresPLC control Siemens SIMATIC S7-1200Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)Effective transport dimensions excluding press, with dismantled tying  ...

Technical data baler:Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, GermanyType AVOS 1410-45/80Year of construction 2009Operation hours 20,536 hours, as of September 2024Press power main press 80kNSpecific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mmTheoretic cycle time 12 secTheoretic throughput capacity 300 m³/hBale size 1,100 x 750 (w x h), the length is variableDrive power 45 kWConnected load 75 kWTying system 4-fold, vertical, fully automaticThroughput capacity at abulk weight of 30 kg/cbm approx. 6,0 t/hbulk weight of 50 kg/cbm approx. 10,5 t/hbulk weight of 100 kg/cbm approx. 17,5 t/hBale weight with a bale length of approx. 1.2 m up to 600 kg, depends on materialSPS controller Siemens S7-300Operating panel pulsotronicBaler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h)Transport weight baler approx. 16 tSpecial equipment:Wear-resistant floor made of HA ...

Technical data on the EPS (Polystyrene) press:Manufacturer FZ-Recycling GmbH & Co. KG, GermanyType FZR 320Year of construction 12/2022Drive power shredder 4 kWDrive power of compactor screw 7.5 kWDrive power hydraulic unit for the holding clamp in the press channel 1.1 kWTotal connected load 12.6 kWCurrent consumption 32 ACompaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material)Block weight after compaction approx. 300kg/m³ (depending on material)Block dimensions 320 x 320 mm, variable lengthThroughput approx. 100 kg/hour, depending on materialAchievable density approx. 250 - 300 kg/m³The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped.Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h)Transport weight press 1,325 kgCondition of the baler:The press was only used sporadically, is in very good conditio ...

A complete baling system is for sale, consisting of a conveyor belt with feed hopper, the baling press with bale chute and wire pulling stations, without wire.Technical data baler:Manufacturer Bollegraaf Recycling Machinery B.V.Type HBC 80 AFYear of construction 1994, overhauled by the manufacturer Bollegraaf 2003Operating hours 51,551 hours, as of December 2024Number of pressed bales 613,446 pieces, as of December 2024Main press pressing force 78 tonnesPre-press pressing force 45 tonnesDimensions of feed chute 1,500 x 1,100 mm (l x w)Filling volume / pressing cycle 2.9 m³Theoretical cycle time 22 secondsThroughput capacity under operating conditions 300 - 450 m³/hourBale dimensions 1,100 x 720 mm (w x h), the length is variableDrive power 45 kWConnected load, total 60 kWTying 5-fold vertical, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 10 tonnes/hourBulk ...

For sale is a complete baling system consisting of conveyor technology, baling press and wire stations.Technical data baler:Manufacturer Bollegraaf Recycling Machinery B.V.Typ HBC 60AYear of construction 2000Hours of operation 32,169 hours, stand November 2024Press power main press 60 tonsPress power of pre-press max. 25 tonsFeed channel 1,320 x 1,100 mmTheoretic cycle time 18 sec.Bale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold verticalThroughput rate at abulk weight of 30 kg/cbm approx. 5,5 tons/hourbulk weight of 50 kg/cbm approx. 10 tons/hourbulk weight of 100 kg/cbm approx. 16 tons/hourBale weight 400 up to 750 kg, depends on materialSPS controller Telemecanique TSX MicroMachine weight baler approx. 24 tonsScope of delivery:1 piece chain belt conveyor1 Bollegraaf HBC 60A baler with whirling unit1 maintenance platform with access lad ...

Technical data baler:Manufacturer Presona AB, SwedenType LP 60 VH1Year of construction 2015Total operating hours, 30,143 hours, as of July 2025Effective pump running time onl 6,527 hours, as of July 2025Number of pressed bales 115,193 bales, as of July 2025Press force pre press 25 tMain press force 60 tonnesSpecific pressing force 73N/cm²Dimensions of feed chute 1,500 x 1,100 mmFilling volume / pressing cycle 2.7 m³Theoretical throughput capacity 800 m³/hourThroughput capacity under operating conditions 350 m³/hourBale dimensions 1,100 x 750 mmDrive power 37 kWTying 5-fold vertical, fully automaticThroughput capacity with aBulk weight of 50 kg/cbm 11 to 14 tonnes/hourBale weights 420 to 570 kg, depending on materialHydraulic oil tank volume 600 litresBaler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h)Transport dimensions excluding press 10,100 x 2,400 x 3,00 ...

Technical information baler:Manufacturer HSM GmbH + Co. KGTyp VK 4812 Year of construction 2014Hours of operation 5,059 hours, stand November 2024Press power main press 48 tonsSpecific press capacity 58,2 N/cm²Feed channel 1,250 x 1,020 mmTheoretic cycle time 11.2 sec.Theoretic throughput rate 332 m³/hourBale size 1,100 x 750 x 600 up to 1,200 mmDriving motor 30 kWConnected load 32 kWRated current 59 ATying system 4-fold horizontal, fully automaticThroughput rate at abulk weight of 20 kg/cbm up to 6 tons/hourbulk weight of 50 kg/cbm up to 13 tons/hourBale weight up to 550 kg, depends on materialSPS controller Siemens SIMATIC S7-200Operating panel Siemens HMI Touch PanelFilling quantity hydraulic oil tank 300 LOil type HVI 46Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)Machine weight ...

Technical data baler:Manufacturer Presona ABTyp LP 80 VHK 1Year of construction 2012Total machine operating hours 25,895 hours, as of July 2025Pump operating hours, effective 14,135 hours, as of July 2025Number of bales pressed 235,597 pieces, as of July 2025Press power main press 78,5 tonsSpecific press capacity 95 N/cm² Press power of pre-press 28 tonsVolume of pressing chamber 2,7 m³Feed channel1,500 x 1,100 mmTheoretic throughput rate 930 m³/hThroughput rate under operating conditions 410 m³/hBale size 750 x 1,100 mmDriving motor 55 kWTying system 5 fold vertical, 3-fold horizontal, full automaticThroughput rate with a bulk density of30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material100 kg/m³ approx. 16 to 25 tonnes/hour, depending on materialThroughput capacity with MSW (Municipal Solid Waste) approx. 20  ...

For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross bindingTechnical data baler:Manufacturer BollegraafTyp HBC 110 K / 75 kWYear of construction 2007Press power main press 100 tonsPress power of pre-press 50 tonsOperating hours 22,605 hoursFeed channel 1,600 x 1,100 mmCapacity per cycle time 3,15 m³Theoretic cycle time 19 sec.Bale size 1,100 x 1,100 mmDriving motor 75 kWConnected load 126 kWFull load current 238 ATying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx.16 tons/hbulk weight of 50 kg/cbm approx. 25 tons/hbulk weight of 100 kg/cbm approx. 47 tons/hBale weight up to 1400 kg, depends on material and bale lenghtVolume oil tank approx. 1,300 lSPS controller Telemecanique TSX MicroOperating panel Schneider MAGELIS TouchBaler dimensions built up ...

Technical data baler:Manufacturer BollegraafTyp HBC 140 KYear of construction 2012Working hours 18.593 hours, stand September 2024Press power main press 140 tonsPress power of pre-press 70 tonsFeed channel 1,600 x 1,100 mmCapacity per cycle time 4,34 m³Theoretic cycle time 16 sec.Bale size 1,100 x 1,100 mmDriving motor 2 x 75 kWConnected load 248 kWFull load current 470 ATying system 5-fold vertical, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx. 30 tons/hbulk weight of 50 kg/cbm approx. 46 tons/hbulk weight of 100 kg/cbm approx. 82 tons/hBale weight 800 up to 1300 kg, depends on material and bale lenghtSPS controller Telemecanique TSX MicroOperating panel Schneider MAGELIS TouchBaler dimensions built up with hopper 13,200 x 2,750 x 8,270 mm (l x w x h)Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h)Machine weight baler approx. 47 tonsSpecial eq ...

For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996, refurbished in 10/2024Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h)Machine weight baler approx. 40 tonsComments:The baler was ...

Technical data baler:Manufacturer Presona ABType LP 50 EH1Year of construction 2005Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of AprilPressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hourThroughput capacity under operating conditions 260 m³/hourDimensions of feed chute 1,250 x 1,100 mmBale chamber volume 2.2 m³Bale dimensions 1,100 x 720 mm, variable lengthDrive power 22 kWTying 5-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm 6 up to 7 tonnes/hourBulk weight of 50 kg/cbm 7 up to 9 tonnes/hourBulk weight of 100 kg/cbm 11 up to 14 tonnes/hourBale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litresPLC control Telemecanique TSX Micro Schneider Magelis control panelEffective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm  ...

Technical data baler:Manufacturer Riko Ekos d.o.o Type S-60K (6)Year of construction 2019Operating hours 2,320 hours, as of August 24Number of pressed bales 4,359 bales, as of August 24Pressing force main press 60 tonnesDimensions of feed chute 1,100 x 1,400 mmFilling volume / pressing cycle 2.1 m³Bale dimensions 720 x 1,100 mm (W x H), the length is variableDrive power 37 kWConnected load, total 47 kWTying 4-fold horizontal, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 5 - 6 tonnes/hourBulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hourBulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hourFilling volume of hydraulic oil tank 800 litresPLC control Siemens SIMATIC S7-1200Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)Effective transport dimensions excluding press, with dismantled tyin ...

Technical data baler:Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, GermanyType AVOS 1410 BS-22/50Year of construction 2023Pump operation hours 1,851 hours, as of July 24Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment)Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment)Feed channel 1,400 x 1,000 mmTheoretic cycle time 13 secTheoretic throughput capacity 266 m³/hBale size 1,100 x 750 (w x h), the length is variableDrive power 22 kWConnected load 65 kWTying system 4-fold, vertical, fully automaticThroughput capacity at abulk weight of 30 kg/cbm approx. 5,5 t/hbulk weight of 50 kg/cbm approx. 7,5 t/hbulk weight of 100 kg/cbm approx. 9,7 t/hBale weight with a bale length of approx. 1.2 m up to 500 kg, depends on materialSPS controller Siemens S7-1500Operating panel Schneider HarmonyBaler dimensions ...

Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating  ...

Technical data baler:Manufacturer BOA Recycling Systems B.V.Type M75-45-A-5-1.6 EcolineYear of construction 2021Hours of operation 2,658 hours (as of May 2024)Number of pressed bales 42,212 pieces (as of May 2024)Press power main press 71,2 kN (71 t)Specific press capacity 9 kg/cm²Operating pressure 280 barCylinder stroke 2,200 mmFeed channel 1,620 x 1,000 mmCapacity per cycle time 2,4 m³Theoretic cycle time 21 secondsTheoretic throughput rate 450 m³/hourBale size 1,100 x 720 mm, length variably adjustable up to 1,400 mmDriving motor 45 kWConnected load 100 kWCurrent consumption 200 ATying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal bindingThroughput rate at abulk weight of 30 kg/cbm approx. 13,6 tons/hourbulk weight of 50 kg/cbm approx. 24,2 tons/hourbulk weight of 100 kg/cbm approx. 36,4 tons/hourbulk weight of 150 kg/cb ...

Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 112Year of construction 2002Operating hours 43,954 hours, stand MarchPress power main press 200 tonsSpecific press capacity 16,5 kg/cm²Feed channel 2,000 x 1,020 mmFilling volume 2,65 cm³Theoretic throughput rate 795 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 75 kWTying system 5-fold horizontal, full automaticThroughput rate at MSW approx. 48 up to 54 tons/h, depends on materialVolume hydraulic oil tank 3,100 lMachine weight baler approx. 50,8 tonsScope of delifery:1 piece baler MACPRESSE, type 1121 operating manual with CE declaration, electrical and hydraulic circuit diagramComments:The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested.The documentation (Manual, CE, electr./hydr.-drawings), are complete ...

Technical data baler:Manufacturer Europress Umwelttechnik GmbH, GermanyType EP5 150 V5Year of construction 2015Operating hours 19,173 hoursNumber of pressed bales 282,961 balesNumber of press strokes from the press ram 1,895,112 press strokesPressing force of main press 150 tSpecific pressing force 181.8 N/cm²Dimensions of feed chute 1,000 x 2,000 mm (w x l)Bale dimensions 750 x 1,100 mm (h x w), length variableDrive power 2 x 55 kW + 15 kW + 2 x 0.75 kWRated current 230 ACable cross-section supply 120 mm²Tying 5-fold vertical, fully automaticHydraulic oil tank capacity 4,300 lPLC control Siemens S7 / ET200STransport weight press 35,800 kgSpecial equipment:Base plates and side walls made of HARDOX steelFree tamper in front of the counter blade, with cleaning cycleScope of delivery:1 piece baler1 piece control cabinet1 set of oil collecting pans under the baler1 piece maintenance platfo ...

Technical data packing press / can press / metal sheet press:Manufacturer unoTech GmbHType UPAXX 70Year of manufacture 2019Operating hours approx. 3,000 hoursPressing force 700 kN at 315 barFilling opening chute 420 x 1,250 mm (d x w)Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on materialDrive power 30 kWConnected load 40 kWPower consumption, total 70 AThroughput capacity for empty beverage cans with:one pressing stroke approx. 1.7 t/hourtwo pressing strokes approx. 2.5 t/hourAchieved compaction approx. 1200 kg/m³Hydraulic oil tank capacity 850 lPress dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)Transport weight press approx. 9.5 tAccessories:Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355Material properties:According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet off ...

fire: Orca, model: S4800-G, Year of construction: 2014, diesel: 135 HP, speed: approx. 1800 min., Total length: 6980 mm, Max height with CRANE: 2700 mm, Crane with grab: yes, Radio remote control: yes, Operating hours: 1000 hours, Weight: 23000 kg