filling machines used for sale

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Low viscosity products filling machine: honey, tomato paste and others

This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator ., Capacity: 2000 cps/hr , Filling Type: Piston Filler , Filling Volumes : 500-1000 gr , Controls: Siemens HMI , Cup disinfection: Peroxide , Film Disinfection: UV , Cup Diameter: 120 mm, Film application: Heat sealing and cutting off roll , Over cap: Plastic lid after sealing

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (=long-tube filler) control: Siemens S7, built in 2019), Bot ...

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

KEG-plant, Additional title: two-stage KEG-Boy, Capacity: 15 Keg/h, Length: 1800 mm, Width: 2300 mm, Height: 800 mm, Formats: Format parts for Plus-Keg treatment; adapter for Keggy barrel treatment, flat fitting system and combination fitting system, Operation / Control: PLC control with S5-100 U, from ELEX-company, with programming device, Material: stainless steel, Position: free standing, Base construction: square tube frame on rollers, Features: 1 cleaning head; 1 filling head; 1 cleaning agent container with pump; CIP adapter for filling head cleaning; programming devic

Bottle filling line with an output of 30,000 bottles/h. 0.33 L Vichy 0.33 Ale and 0.5 L NRW single-use and reusable bottles are used. The system consists of the following machines/components: - Depalletizing system Manufacturer: Kettner - New glass remover Manufacturer: Kettner - Empty container control Manufacturer: Heuft - Uncorker/Unscrewer Manufacturer: Rink - Unpacker Manufacturer: Kettner - Bottle washing machine Manufacturer: KHS - Crate washer Model: KWZ-20 - No.115 - Empty bottle inspector Manufacturer: Heuft - Bottle filler Manufacturer: KHS - 2 closure feeders Manufacturer: Gassner - Bottle level control Manufacturer: Heuft - Labeler Manufacturer: Krones - Label control Manufacturer: Heuft - Packer Manufacturer: Kettner - Palletizing system Manufacturer: Kettner - Pallet binder Manufacturer: Born - Pallet film wrapper: Manufacturer: Robopac - Pallet labeling Manufacturer: Webe ...

Capacity: 360 Bo/h, Filling points: 6 pieces, Voltage: 230 V, Compressed air: min. 6 bar, Length: 1590 mm, Width: 700 mm, Height: 1875 mm, Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L, Base construction: steel rack, Features: including add-on parts, filling programm modifiable

Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m

Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14 000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: to the right, Operation / Control: Siemens S5

Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5

Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33 Ale and 0.5l NRW disposable bottles are used. The system consists of the following machines/components: -New glass clearer Manufacturer: Kettner -Bottle filler Manufacturer: KHS -2 closure feeders for crown caps and screw caps Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft, Additional title: one way bottles, Capacity: 30000 bottles/h, Formats: 0,33l Vichy, 0,33l Ale and 0,5l NRW, Features: New glass clearer; bottle filler; 2 closure feeders; bottle level control; labeler; label control;

PET filling line from KHS, Additional title: with palletising and depalletising, Performance at 1 liter: 24000 bottles/h, Formats: 0,5 L and 1 L bottles; Maximum height: 360 mm, maximum diameter: 100 mm (format parts available for bottles within these limits), Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer

Cap applicator AK 400 for KEG barrels The cap applicator can be used to fit snap-on caps for triangular fittings or key kegs as well as snap-on caps for flat fittings on drums of different diameters. The caps are first removed from the storage bunker into the sorting drum. bunker into the sorting drum. The caps are conveyed in the correct position into the feed rail with electronic quantity monitoring using air pressure. The drum is centred by a parallel gripper to position the cap. The cap is automatically transferred to the fitting head, positioned on the fitting and fitted., Additional title: Cap applicator machine for various fittings, Capacity approx.: 300 Keg/h, Compressed air: 200 l/min., Max. storage bunker content: 800 caps, Power: 1 kW, Current: 2,4 Ampere, Voltage: 380 Volt, Frequency: 50 Hz, Formats: Snap caps for basket or flat fitting possible, Operation / Control: Siemens  ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., Manufacturer: Benhil, Model: 8312 Junior, Condition: Used, Serial Number: 312/57, Type of Machine: Butter Packaging Machine, Capacity: ± 750 Kg/h, Packaging Weight: 250 gram, Packaging type: Bottom folding, Motor power: 2,2 kW, Weight: ± 1.275 kg

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., Manufacturer: Benhil, Model: 8311Junior, Condition: Used, Type of Machine: Butter Packaging Machine, Capacity: ± 600 Kg/h, Weight: 250 grams, Packaging type: Bottom folding, Motor power: 1,5 kW, Machine Weight: 840 kg

Used packing machine made by Hugart, type: DS 7500. Capacity: 7500 pcs / h. New 2010. Fi 95 mm.

Used packaging machine made by Hugart, type: DS 5000. Capacity 5000 pcs / h. New: 2013.

Used automatic vertical sachet machine from Alpha Pack Europe type PM-100. New 2016. Technical data: - 6 mm seal, - Capacity 30 - 50 pcs/min (depending on the package, - Sealer length: 30mm-120mm, - Seal width: 30mm-85mm, - Automatic single-line packaging machine for 3 or 4-seal sachets, - Notch on the sealer for easy opening, - PLC controlled machine, - Color touch screen with which all settings are made, - Photocell for printed film, - Structure and parts in contact with the product made of stainless steel, - Safety covers made of transparent plastic, - Hot-stamp” date printer for printing batch number and expiration date on sachets, - Piston dispenser, - Heated product tank with infinite temperature control. Weight 250 kg.

For sale is a complete aseptic filling line: ELOPA S-PS80HA, year of construction 2008, operating hours: 32,500h Capacity: 8,000 pkg/h Possible formats: 4x3, 4x2, 2x3 Diamond Curve gable top pack for 0.5 l, 0.75 l and 1 l Inclusive: 3x Applicators ELOPAK, Type PLA-S30 Tray packer: OYSTAR A+F, Machine No. 320606 01, built in 2011 Various convceyors The plant has been out of production since 04.2024, but can still be viewed installed. Dismantling, transporting etc. by the buyer. Subject to prior sale

Bagging machine with integrated scale, ideal for valve bags. Paglierani brand, precise and efficient industrial design. Brand: Paglierani Type: Bagging Machine for Valve Bags Includes dosing scale Compact and robust design