Rotating Benches used for sale (13)

Lathe PPL 200-225 - Turning diameter over bed: 400-450 mm - Turning diameter over slide: 235-285 mm - Offset with bridge: turning diameter 600-650 mm - Face plate diameter: 350 mm - Bed width: 320 mm - Engine power: 5.5 hp - Tool carriage: 150 mm stroke Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

turning diameter: 450 mmturning length: 1500 mmcentre height: 225 mmSwing diameter: 450 mmTurning length: 1,500 mmCentre height: 225 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lard lathe Turning length approx. 2000 mm Turning diameter approx. 1100 mm Center height approx. 450 mm without machine table Basic thread M 55 with M 33 adapter for standard chuck with 5 face plates of 100 – 600 mm diameter was used to turn molds for a foundry. Weight approx. 2800 kg

turning diameter: 400 mmturning length: 1000 mmswing diameter over bed slide: 400 mmturning diameter over slide: 225 mmbed width: 433 mmspindle bore: 56 mmtotal power requirement: 7,4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,5 x 0,9 x 1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 435 mm, 1500 mm

Coolant equipment, a lot of accessories

turning diameter: 1.320 mmturning length: 5000 mmswing diameter: 1250 mmworkpiece weight: 14 tturning diameter over slide: 900 - 950 mmtotal power requirement: 45 kWweight of the machine ca.: 18 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling pump for SN 71 C Trens lathe

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...

faceplate diameter: 1000 mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmturning diameter over slide rest: 2040 mmturning length: mmtotal power requirement: 55 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mBrand ZerbstMachine no D982Type DP 1 - 2.040 ØDigital readout Maximum turning diameter 2.040 mm øPassage 98 mm ø4-Jaw Chuck 1.250 mm øSpeed 4,5 - 224 RPMSeparate chisel support Engine power 55 kWExcluding slot table Quick-change holder Machine weight 12.000 kgDimensions:Head: 2.500 x 1.800 x 1.700 mmsupport: 2.200 x 1.800 x 2.000 mmElectrical panel: 2.200 x 600 x 2.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mmturning diameter over slide rest: 1400 mmcentre distance: 1500 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.