planing machines used for sale (509)

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic ...

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Manufacturer: WEINIG (Michael Weinig AG) Model: Powermat 700 Machine type: Four-Sided Planing and Moulding Machine Year of manufacture: 2023 Machine No.: 10008719 Standard Technical Specifications: Working height: 10–160 mm Working width: 20–230 mm Spindle speed: 7,000 rpm (except straightening spindle) Feed speed: 5–40 m/min, frequency controlled Max. tool cutting circle on horizontal spindles: 200 mm (except 1st bottom spindle) Max. tool cutting circle on vertical spindles: 200 mm Standard motor power, vertical spindles: 7.5 kW Standard motor power, horizontal spindles: 7.5 kW Standard Equipment / Control: Comfort Set operating concept Memory Plus control Electronic digital read-outs Pressure shoe in front of top spindle, feeding from the tool Spindles started and stopped by frequency converters Electrical Data: Operating voltage: 3 × 400 V / 50 Hz Control voltage: 24 V Total ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-30 m/min.control: Powercom Weinig Powermat 500 (Window Version for window producers)5 x PowerLock--------------------------------------------------------The machine will be a partial renovated at our warehouse prior to delivery.The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated.Technical Summary:--------------------------------------------------------- 6 spindles, 5 of which are PowerLock- 8,000 rpm- Large PowerCom control system- Spindles 2, 3, and 4: CNC-controlled axial adjustment- Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment- Window package for glazing bead separation:pneumatic cycling for right and top spindlesfor bead separationDetailed Description:------------------------ ...

Number of spindles: 4 St.Working width: 230 mmWorking height: 150 - 200 mmLength of the planing table: 2000 mmFeed motor: 4 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 9 St.Working width: 230 mmWorking height: 120 mmeinig Unimat 23, 8 spindles + universal spindle--------------------------------------------Width and height are motorized/controlledIncludes Haberkorn workpiece return systemMachine can still be viewed in operation for a short time!Spindle configuration--------------------------------------------Spindle 1: bottomSpindle 2: rightSpindle 3: leftSpindle 4: rightSpindle 5: leftSpindle 6: topSpindle 7: bottomSpindle 8: topSpindle 9: universalTechnical specifications according to the manufacturer – no guarantee provided!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder--------------------------------------------Sold on behalf of a client!Working width (min. – max.): 15 – 230 mmWorking height (min. – max.): 10 – 150 mmWidth and height are motorized/controlled6 spindles, spindle diameter 40 mm, 6,000 rpmSpindle configuration--------------------------------------------Spindle 1: bottomSpindle 2: rightSpindle 3: leftSpindle 4: topSpindle 5: topSpindle 6: bottomTechnical specifications provided by the manufacturer – no guarantee!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 160 mmFeed motor: 4 kWDimensions (L/W/H): 4400 x 1800 x 1500 mmWEINIG Unimat 23 Automatic Planing and Grooving MachineFor sale on behalf of a customercustomer is still working on it, machine can be visited--------------------------------------Manufacturer’s Technical Specifications:Working width: 20–230 mmWorking height: 6–160 mmNumber of spindles: 6Motor power per spindle: 5.5 kW (7.5 PS)Feed motor power: 4.0 kW (5.5 PS)Spindle speed: 6,000 rpm------------------------------- -------Planing table length: 2 m1 adjustment gauge2 planing heads, 240 mm3 brake units are defective, these could be reinstalled by an electrician.--------------------------------------Additional technical data (former order confirmation) attached--------------------------------------Price of the above-mentioned machine upon request!---------------- ...

SAC RS 530 industrial thicknesser for professional use in joinery workshops and wood processing industries. Working width 530 mm, working height 240 mm. Four-knife cutterhead (knives 530 mm) driven by a 5.5 Hp motor. Motorised table height adjustment on a cylindrical column. Two feed speeds with a grooved (serrated) infeed roller. Freely adjustable pressure roller on the table. The machine has been fully serviced and is ready for work. Further details not listed here (serial number, year of build, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Fully serviced, ready to work Auction-ID: A7-50988-18

Used economy thicknesser (thickness planer) for woodworking. • Used to bring boards and battens to a uniform, accurate thickness after the surface has been planed flat, in joinery and furniture production. • Brand and model are not recorded; please contact us for details. • Condition: has not been in operation for several years; inspection and testing are required before use. • For technical details such as working width, motor power and supply voltage, please contact us. Auction-ID: A7-50988-135

Used economy-type woodworking surface planer (jointer) for smooth, flat planing of timber surfaces. Suitable for small joinery shops and workshops. Brand, exact model and technical specifications (planing width, weight, motor power) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-29

Used economy wood thicknesser (planing machine for thickness), green-painted machine with dust extraction outlet. Working width: 500 mm (50 cm). Electric raising and lowering of the table via a home-made (improvised) mechanism. Cutterblock with 3 knives. Condition: as it was working at the customer. Brand, exact model, working height, feed rate, electric connection, weight and dimensions are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-25

Reconditioned cast-iron Origlia thicknesser, suitable for joinery workshops and wood processing industries. Working width 400 mm, working height 200 mm. Three-knife cutterhead, single feed speed, 380 V motor. The machine has been fully reconditioned. Exact model and further technical specifications (motor power, serial number, year of build, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Fully reconditioned, delivered with 1 year warranty like the new machines Auction-ID: A7-50988-19

Used economy-type woodworking surface planer (jointer) for smooth, flat planing of timber surfaces. Suitable for small joinery shops and workshops. Brand, exact model and technical specifications (planing width, weight, motor power) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-30

Used Italian-made Casadey D410 surface planer (jointer) for professional use in joinery shops and wood-processing industry. Planing width 410 mm with 4 knives, table length 2.50 m, motor 3 kW / 380 V, dust extraction outlet 150 mm, tilting side fence. Fully checked by our specialised technical team. Weight, dimensions and year of build are not confirmed for this specific unit - please contact us for details. Fully checked by our specialised technical team Auction-ID: A7-50988-27

Used Paoloni S515 CE thicknesser of Italian manufacture, suitable for professional use in joinery workshops and wood processing industries. Working width 510 mm, working height 290 mm. Four-knife cutterhead (knives 515 x 35 x 3 mm). Electric table height adjustment on a central cylindrical column, with a mechanical dial indicator for working thickness (in thousandths of a millimetre). 4 feed speeds. Fluted steel feed roller at the front and smooth steel roller at the rear; the rear pressure roller is adjustable on the planing table. Motor 7.5 Hp, 380 V. Machine weight 700 kg, external dimensions 980 x 1170 x 1149 mm. Delivered with a one-year warranty of good operation. Auction-ID: A7-50988-20

Used SICAR FB 400 surface planer (jointer) for woodworking. • Heavy-duty surface planer with long tables and a fence supporting the workpiece. Used to produce a flat, straight reference surface on boards and battens before further processing. • Brand: SICAR, model FB 400. • Planing width: 400 mm. • Table length: 2440 mm. • Rebate depth: 20 mm. • Cutterblock diameter: 120 mm, 4600 rpm, 4 knives (400 x 30 x 3 mm). • Motor power: 4 HP. • Fence tilts up to 45°. • Net weight: 590 kg. Dimensions: 2500 x 720 x 1040 mm. • Specifications are those of the model as given in the manufacturer's leaflet. Please contact us for further details, e.g. supply voltage. • Condition: has not been in operation for several years; inspection and testing are required before use. Auction-ID: A7-50988-133

Manufacturer & Model: Manufacturer: Gubisch (Made in West Germany) Model / Type: GN 147 Year of Manufacture (Baujahr): 1972 Machine Serial Number (Masch.Nr.): 1394 Electrical Specifications: Voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Connected Load / Power (Leistungsaufnahme): 33.0 kW Machine Configuration & Features: Type:industrial automatic four-side moulder and planer / multi-spindle profiling machine. Construction: Solid heavy-duty cast iron chassis. Processing Stations: Multi-spindle setup powered by independent electric motors. Infeed System: Extended alignment/infeed table with side guide and roller feed drive system. Controls: Integrated control console with push buttons, selection switches, and emergency stop button. Adjustments: Mechanical handwheels for spindle and guide adjustments. Dust Extraction: Multiple flexible suction hoses connected to top processing stati ...

Four-sided woodworking planer and moulder with five machining spindles, powered feed rollers and an extended infeed table with side guide. Equipped with adjustable spindle assemblies, mechanical position indicators, pneumatic feed-roller pressure cylinders and individual extraction hoods with flexible hoses. Enclosed machining area with lifting access covers, inspection windows and internal lighting. Front adjustment handles, push-button controls, emergency stop, rotary main switch and separate control console. LEADERMAC and ITALPRESSE markings. Auction-ID: A1-50699-45

Working width: 410 mmLength of the planing table: 1450 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2650x850x1100 mmweight of the machine ca.: 750 kgSCM Surface planer F 410 N-----------------------------Technical manufacturers description:Planing width: 410 mmTotal table length: 2600 mmTable height: 855 mmFeed table length: 1450 mmAluminum planing fence swivels up to 45°Planing fence dimensions: 1100 x 170 mm4-knife planing shaft diameter: 120 mmKnife shaft speed: 5000 rpmMotor power: 4 kWTERSA monobloc one-way reversible cutterheadSCM dressing protection device integrated in machine stand120 mm diameter extraction nozzleManual star-delta switchMotor protection switch, undervoltage releaseLockable main switchAutomatic motor brakePivoting auxiliary fence-----------------------------Price of the above machine on request!-----------------------------(technical data accor ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 5,5 kWFeed speed: 7-36 m/min.Kuper SWT 23 XL-6 Four-Sided Planer-----------------------------------------------Machine fully functional tested!... Working width min/max: 18 - 230 mmWorking height min/max: 8 - 150 mmSpindle configuration:1st Spindle - bottom-----------------------------------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 240 mmPulley diameter: 160 mmAdjustment: axial and radial, manual2nd Spindle - right------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 160 mmPulley diameter: min. 110 mm - max. 200 mmAdjustment: axial and radial, manual, via mechanical digital displayAdjustment: vertical 35 mm below Table3rd Spindle - Left------------------Power: 7.5 kWSpeed: 6,200  ...

Number of spindles: 8 St.Working width: 230 mmWorking height: 120 mmWeinig Planing and moulding line-------------------------------Consisting of the following individual machines:Item 1: Weinig Profimat 23 E, four-side planer, stock number: 28035 spindles + glazing bead sawItem 2: Weinig Uniplan 23, stock number: 2804Fine and hydroplaner with 2 horizontal spindlesItem 3: Weinig RF 15, stock number: 2805Longitudinal-cross-longitudinal conveyor with workpiece return to the operatorDetailed descriptions of the machines can be found under thementioned stock numbers.(Technical specifications according to the manufacturer, without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 9 St.Working width: 240 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 7,5 kWWorking speed: 6-36 m/minweight of the machine ca.: 6500 kgControl: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock------------------------------------------------------------Summa ry:- 9 spindles (including 4 x HSK 85 S)- Electronic horizontal and vertical positioning- 8,300 rpm- SCM Set-up- SCM T-Set- Includes workpiece infeed magazineWorking dimensions:- Maximum working width: 240 mm- Minimum working width: 25 mm (reducible to 15 mm via installed special kit)- Maximum working height: 120 mm- Minimum working height: 10 mm (reducible to 6 mm via installed special kit)Special working cross-section equipment: Equipped with a special kit forextremely small minimum cutting dimensions of 15 x 6 mm.Infeed ta ...

Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ ----------This machine is currently being refurbished at our facility!Pictures taken before dismantling and currently during the processing phase!Brief Summary:-------------------------------------------------------------- --------- 5 spindles with 8,000 rpm- 4 x HSK/Powerlock- Axially and radial CNC adjustments of the spindles via control- CNC-controlled adjustment and positioning of the feed- Table tops with guide blades at spindles 2 and 3.- Includes Weinig/Neumann RF 15 return conveyor systemDetailed Description:---------------------------------------------------------- -------------Technical  ...

Number of spindles: 5 St.Working width: 250 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 500 with grooved table----------------------------------The machine arrives at the warehouse and is cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- 8,000 rpm- Grooved table for short or difficult-to-guide workpieces, coatedwith Marathon PowerCoating- One driven roller in the outfeed table, hardened: 210 mm wide- Left and top spindles controlled for width and height- Quick-release spindle nutDetailed Description:---------------------------------------------------------- -------------Technical Data:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 51st Spindle - bottom----------------------------------------------- Motor with brake: 7.5 kWSpindle dia ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.total power requirement: 27 kwDimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig four-side planer Profimat 23 window version withglazing bead removal,ATS control and program control-------------------------------------Machine will be renovated and functionally checked!Technical data summary(please inquire about any additional accessories included)-------------------------------------Generally--------------- ----------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6 pieces.> Dressing table length: 2500 mm> Feed speed: 5-24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight, approx.: 2500 kgSpindle arrangement------------------------------------->  ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.Dimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig Profimat 23 Four-Sided Planer – Window Version(With glazing bead separation feature, or usable as a grooving spindle)ATS Control and Program Control-------------------------------------Technical Specifications Summary(Please inquire regarding any additional accessories that may be included)-------------------------------------General----------------- -------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6> Infeed table length: 2500 mm> Feed motor: 3 kW> Feed speed: 5–24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight (approx.): 2500 kgSpindle Arrangement------------------------------------ ...

Number of spindles: 6 St.Working width: 240 mmWorking height: 200 mmLength of the planing table: 2500 mmFeed speed: 6-36 m/min.Dimensions (L/W/H): 4900x1700x2000 mmweight of the machine ca.: 3500 kgControl: SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production-----------------------------------------------The machine is in process of partial reconditionning at our facility at the moment.Highlights:- Machine with 6 spindles (2 with HSK mounting)- Spindle speed 8,300 rpm- Working width 240 mm, working height 200 mm- Electronic horizontal and vertical spindle positioning- PRL equipment for glazing bead separation- Air-cushion table- Touchscreen controlTechnical Data:Working width: max. 240 mm (kit for min. width 15 to 25 mm)Working height: max. 200 mmFeed speed: infinitely variable 6 to 36 m/min via inverterInfeed table: length 2,500 mmMachine weight: approx. 3,550 kgDimensions: ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------The machine renovated and functionally checked !Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mm ...