boring mills and machining centers used for sale (3,272)

x-travel: 700 mmy-travel: 420 mmz-travel: 610 mmtable-size: 1260 x 490 mmspindle taper: HSK E50 spindle turning speed range: 36000 U/mintool change unit: 42 weight of the machine ca.: 5 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 45 mmquill stroke: 125 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmspindle turning speed range: 75 - 3200 U/minmax. milling cutter diameter: 80 mmspindle taper: ISO 30 max. distance between table and spindle-nose: 460 mmthroat: 230 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 580 Kgdimensions of the machine ca.: 1,2 x 1,0 x 2,1 mEquipment:All axes with 3-digital display.Quill travel has separate digit display.Automatic feed in X-axis and quill.Motorized Z-axis.tapping device.coolant system.machine base.Collet set, SK tool holder.Further machine accessories in box.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vboring feeds:: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 2000 mmz-travel: 1600 mmspindle diameter: 150 mmspindle taper ISO: 50 spindle stroke: 700 mmspindle turning speed - stepless: 5 - 2500 U/minrapid traverse: 10000 mm/mintable surface area: 1600 x 2000 mmworkpiece weight: ca. 20 tspindle drive motor: 50 kWfeeds x/y/z -stepless: 1 - 9999 mm/mintable positioning: 360.000 °total power requirement: ca. 70 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,0 x 8,0 x 4,5 mHorizontal drilling and milling machine / machining centre in cross-table designwith:2005 new 5-axis CNC control Dr. Heidenhain TNC 430 - electronic handwheel HR410 for all axes with V24 interface, punched tape reader, new electrics,new hydraulics, new servo motors, measuring probe for workpiece measurement- 60-position chain tool changer model WM III k02- B-axis (table rotary adjustment) 360,000 °- IKZ - internal spindle cooling, 20  ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.000 mmy-travel: 1.000 mmz-travel: 1.200 mmcontrol: TNC 430 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1transmission ratio: 2 power capacity - main spindel: 30 (100%) / 45 (40%) kWTorque: 1.050 / 1.580 Nmtool taper: HSK 100 swivellable: B: +/- 180 °indexing: B: 0,001 °work table:: table surface area: 1.000 x 2.000 mmmax. table load: 4.000 kgflute distance: 100 mmT-slots: 18 H7 number of T-slots: 10 tool magazin:: number of toolpositions: 40 pos.tool taper: HSK 100 tool changing time: 10 secmax. tool diameter: 250 mmmax. tool length: 400 mmmax. tool weight: 20 kgfeeds:: feed speeds: X,Y,Z: 0 - 20.000 mm/minfeed speeds: B: 10 1/minoutput: X,Z: 15,7 / Y: 8,5 kWoutput: B: 2,5 kWfeed power: 22500 Ntotal power requirement: kWweight of the machine ca.: 23 tdimensions of the machine ca.: 8,0 x 8,0 x 3,3 mChip conveyor: Coolantsystem: high pre ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: TNC 426M HeidenhainMain spindle:: turning speed range - main spindle: 20 - 9.000 min/-1power capacity - main spindel: 9 / 13 kWmax. Torque: 57 / 82 Nmtool taper: ISO 40 DIN 69871swiveling-rotary-table:: table diameter: 700 x 500 mmswivellable: B: 105° (-10°/+95°) man.rotatable: 360° man.max. table load: 200 kgnumber of T-slots: 7 T-slot - distance: 63 mmT-slot - width: 14H7 mmcenter hole: 30H7 mmTool-Presetter:: number of toolpositions: 16 pos.tool taper: ISO 40 DIN 69871max. tool length: 290 mmmax. tool weight: 6,0 kgmax. total weight: 50 kgfeeds:: feed speeds: max. 10.000 mm/minrapid traverse: 12 m/mininput unit: 0,01 mmtotal power requirement: 17 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mDocuments: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Automat ...

x-travel: 650 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840 D pl SiemensMain spindle:: turning speed range - main spindle: 20 - 28.000 min/-1power capacity - main spindel: 23 / 18 kWmax. Torque: 79 Nmtool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mmSwivel range: A: +30° / -115 °rotatable: C: 360 °max. table load: 500 kgmax. workpiece sizes: Ø 630 x 313 mmtable speed: A:25 / C:65 min/-1Tool-Presetter:: number of toolpositions: 117 pos.max. tool diameter: 90 (125) mmmax. tool length: 300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 m/minAccelaration: 10 m/s²feed power: 8,5 kNtotal power requirement: 43 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 8,5 x 5,5 x 3,0 mDocuments: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 pos. full splash guard ...

x-travel: 550 mmy-travel: 305 mmz-travel: 460 mmControl: Sinumerik 808D adv. SiemensMain spindle:: turning speed range - main spindle: 10 - 10.000 min/-1power capacity - main spindel: 11 / 7,5 kWmax. Torque: 70 / 48 Nmtool taper: BT 40 work table:: table surface area: 800 x 320 mmmax. table load: 300 kgT-slots: 3x 14 x 100 mmdistance spindle /table: 100 - 600 mmTool-Presetter:: number of toolpositions: 12 pos.tool taper: BT 40 max. tool diameter: 70 mmmax. tool weight: 6,0 kgchange-time tool to tool: 7,0 secfeeds:: rapid traverse ( X / Y / Z ): 10 m/minfeed speeds: max. 10.000 mm/minrepeating accuracy: +/- 0,008 mmpositioning accuracy: +/- 0,01 mmtotal power requirement: 15 kVAweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3,5 x 2,5 x 2,4 mDocuments: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo CNC-MachiningCenter Ve ...

spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 16800 x 5500 mmtool taper: SK 60 total power requirement: kWweight of the machine ca.: 173 tdimensions of the machine ca.: m- Additional equipment Angle head large and small- The OB no. is: 22979- The table is the model S20 MP table Size: 2200 x 2500 mm- The processing width on the machine X -Way is 6000 mm- Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...

bore capacity in steel (diameter): 28 mmthroat: 200 mmbore stroke: 105 mmtable surface area: 360x340 mmDistance spindle/table max.: 540 mmturning speed range - stepless: 120-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode  ...

x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871work table:: table surface area: 1.200 x 560 mmmax. table load: 1.000 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange time: 1,6 secchange-time chip to chip: 7,0 secfeeds:: feed speeds: 20.000 mm/minrapid traverse: 30 m/minFeed force: 5 kNtotal power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,0 x 3,0 x 2,8 mChip conveyor: Automatic Tool Changer: 30 pos. Coolantsystem: DXF import function: elektr. hand wheel: Operation mode 4: direct travel-measuring-system: XYZ Coolant-Air-Blast- ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mmarm length: mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -

x-travel: 600 mmy-travel: 450 mmz-travel: 300 mmCNC-control: Roeders RMS6 table-size: 700 x 550 mmmax. table load: 800 kgspindle taper ISO: spindle turning speed range: 42.000 U/minfeed stepless: 0 - 30.000 mm/minrapid traverse: 30 m/mindrive capacity - spindle motor: 14 kWtool change unit: Pick-up 18 Pos.voltage: 400 Vtotal power requirement: 20 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,00 x 2,30 x 2,70 m- Serial No.: 88231-83- HSC spindle Fischer MFW1230/42- Dust extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - / Contact us at -

Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 380 mmbore stroke: 160 mm: 4 speeds: 60 - 1250 U/mintable-size: - mmtotal power requirement: 3,3 kWweight: 900 kgdimensions: - mmFeatures:-Gear drilling machine with a robust design-Column-mounted drilling table-Right/left rotation-Feed-Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 6700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.