High Speed Radial Borers used for sale (17)

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

bore capacity in steel (diameter): 32 mmarm length: 1230 mmtable surface area: 1200 x 500 mmbore stroke: 180 mmfeed - independent: 0,10 - 0,15 - 0,20 - 0,30 mmturning speeds: 60 - 1800 U/mintaper MK: 4 total power requirement: 2,7 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x 2,3 mQuick radial with:- Feed- Thread cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 32 mm

Boom travel approx. 600 mm Distance table - spindle nose min. 250, max. 650 mm Quill stroke 190 mm Speed range: 18 speeds 41-1,850 rpm Drill feeds: 4 pieces ( from 0.1 - 0.3 mm/rev ) Work table 600mm x 1200mm Tool holder MK 4

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm, 900 mm

40 DONAU fully functional, Condition : well used

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 102 - 2000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mCompact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

bore capacity in steel (diameter): 23 mmspindle taper: MK 2 spindle stroke: 130 mmarm length: ca. 860 mmtable-size: 1280 x 500 mmsurface area: ca. 1250 x 480 mmturning speed range: 115 - 2400 U/minworkpiece height max.: ca. 535 mmboring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kgtotal power requirement: 1 kWrange L-W-H: ca. 1300 x 1800 x 2100 mmDistance spindle center - stand center (projection): approx. 860 mmDistance table quill (workpiece height): max. 535 mmAdjustability of the horizontal/vertical arm: approx. 300 - 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm 0P2Fdo3 - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

spindle turning speed - stepless: 26 - 1650 U/minvoltage: 380 V0: 50 Hzrated current: 15 Aconnected load: 6,5 kWtool taper: MK 4 weight of the machine ca.: 2,3 tdimensions of the machine ca.: 1500 x 1200 x 2500 mmOperating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 15 AConnection: 6.5 kWAutomatic feed: 0.05 - 0.45 mm/revColumn lifting speed: 40 mm/sColumn stroke: 450 mmDrilling spindle stroke: 200 mmDrilling zone: 430 - 1150 mmHeight adjustment of the drilling spindle: 330 - 780 mmTool holder: MK 4Table dimensions: 1525 x 560 mmTable height: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 30 - Threading GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle – table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg -with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the left side of the machine

bore capacity in steel (diameter): 50 mmarm length: 2000 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 5,8x4,5x3,4 mBrand: BatliboiType: BPR-50Boiler radial drilling machineCapacity: 50 mmThroat depth: 2.000 mmSpindle taper: MK5Stroke: 350 mmDrilling Spindle: 75 mm øHead in degrees adjustableSpeed min: 16 RPMSpeed max: 800 RPMClamping surface: 2.610 x 1.050 x 260 mmMachine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mmMachine weight: 6.570 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24130 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition