boring mills and machining centers used for sale (3,253)

x-travel: 1695 mmy-travel: 1060 mmz-travel: 1345 mmcontrol: MAZATROL MATRIX 2 Table dimensions: 1000 x 1000 mmtable load: kgturning speed range:: 10000 min-1spindle motor: 37 kWspindle taper: BT 50 tool magazin:: 80 Plätzeworkpiece diameter: 1250 x 1200 mmconnected load: 127 kVAweight of the machine ca.: tdimensions of the machine ca.: 3400 x 7100 x 3379 mm5-axis machining centre- MAZATROL MATRIX 2 CNC control- 2-position pallet changer- Chip conveyor- 80-position tool changer (BT 50)- NC rotary table, 0.0001°-- B-axis: 150° (120° to -30°)- C-axis: 360° (table speed: 500)- Coolant through Spindle- Oil cooler- Air through spindle- Laser measurement (tool)- Renishaw RPMP 600 touch probe- Fixture for angle milling headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 1500 mmz-axis: 3000 mmW-axis (spindle longitudinal): mmspindle diameter: 100 mmtable surface area: 1.400 x 1.300 mmtable load: tspindle turning speed range: U/minpower capacity - milling spindle: kWtool taper: MK |dimensions: 6,4 x 3,2 x 3,4 mweight of the machine ca.: 11,0 tused table borer.- some tool holders- turntable with motor- coolant system- facing plate Ø 660The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 900 mmz-axis: 800 mmW-axis (spindle longitudinal): 500 mmspindle diameter: 90 mmtable surface area: 1.000 x 1.000 mmtable load: 2,5 tspindle turning speed range: 8- 1600 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 |control: Heidenhain TNC 407 dimensions: 4,5 x 3,25 x 3,0 mweight of the machine ca.: 8 tused table borer. retrofitted to CNC Heidenhain TNC 407- some tool holders- turntable with motor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindle speeds: 10.000 U/minNC rotary indexing table Ø: 630 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 5 spindle diameter: 60 mmfeed: ja m/minweight of the machine ca.: 1,1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 35.0 / 40.0 mmbore capacity in cast iron: 50.0 mmthreading: M 30 bore stroke: 150 mmSize of table plate: 730 x 210 mmCenter of spindle to wall or column: 280 mmSpeed: 80.0 - 1.400 U/mindistance spindle /table: 85 - 755 mmspindle taper MT: 4 MKcolumn diameter: 120 mmfeed: 0.1 / 0.2 / 0.3 mm/Uvoltage: 400 VMotor output: 1.3 / 2.3 KWweight of the machine ca.: 350 kgrange L-W-H: 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features:- Heavy-duty, versatile column drill press- Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots- Automatic spindle feed - Fixed drilling depth stop- Stepless speed adjustment- Pole-changing motor- Thread-cutting device- Quick-release drill chuck with tapered shank - User manual (PDF)The data for this ad was crea ...

spindle diameter: 130 mmx-travel: 9000 mmy-travel: 3000 mmz-travel: 1000 mmw-axis: 700 mmspindle turning speed range: 10 - 2800 U/minrapid traverse: 10000 mm/minfeeds: 1 - 8000 mm/mininner taper of milling spindel: ISO 50 ram: diameter: 360 x 400 mmspindle: 46 / 37 kWTool changer: 40 Tools rotary table:: 30 tsurface area: 2000 x 2500 mmtotal power requirement: 132 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 15500 x 9000 x 5391 mmCNC Floor Type Boring Machine equipped with:- CNC-Control Siemens 840D sl- CNC-Rotary Table 2000x2500mm, 30t - ATC for 40 tools- Cooling through Spindle (20 bar) - 2 pcs Floor Plates 4000 x 2000mm- HUI 50 Boring Head- Facing Head- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 800 mmz-travel: 560 mmControl: HEIDENHAIN iTNC 530 Tools changer: 30 pos.table-size: 950 mmturning speeds: 28000 U/minoutput: 55/43,5 kwtaper: HSK A 63 a-axis: -10º/+110º °c-axis: 360 °Internal cooling system: 10 - 80 bartable load: 800 kgtotal power requirement: 80 kVATotal weight, approx.: 13 tdimensions of the machine ca.: 3,6 x 3,8 x 3,18 m5-axis machining centre DMG-MORI HSC 105 linear- CNC control Heidenhain TNC 530- Tool changer 30-fold (HSK A63)- NC rotary table2606h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 520 mmz-travel: 475 mmControl: 840D sl Operate (CELOS) SiemensMain spindle:: turning speed range - main spindle: 20 - 14.000 min/-1power capacity - main spindel: 20,3 / 14,5 kWmax. Torque: 121 / 84 Nmtool taper: SK 40 DIN69871work table:: table surface area: 1.160 x 570 mmmax. table load: 1.000 kgwork height max.: 800 mmtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 DIN69871max. tool diameter: 80 / (130) mmmax. tool length: 300 mmchange-time chip to chip: 5,9 secfeeds:: rapid traverse ( X / Y / Z ): 42 m/minfeed speeds: max. 36.000 mm/minfeed power: 6,5 kNAccelaration: 5 m/s²total power requirement: 18 kVAweight of the machine ca.: 6,7 tdimensions of the machine ca.: 5,5 x 3,5 x 2,8 mDocuments: Chip conveyor: Coolantsystem: 245 l through spindle coolant: 20 bar direct travel-measuring-system: Spray gun: elektr. hand wheel: Tool Maga ...

bore capacity in steel (diameter): 50 mmthroat: 400 mmbore stroke: 250 mmtaper MK: 4 MKtable-size: 705 x 580 mmfeeds: 0,1 - 0,2 - 0,3 - 0,4 mm/Uturning speeds: 60 - 1205 U/mintotal power requirement: 4,0 KWweight of the machine ca.: 0,85 tdimensions: 1,2 x 0,8 x 2,55 mColumn drilling machine with:- Power feed- Left/right rotation- Coolant pump- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Toyoda (machining centers), Palltec (RGV) Type of System: Horizontal machining centers with matrix tool magazines and RGV pallet handling Year of Manufacture: 2006 to 2008 MACHINING CENTERS Toyoda 1 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 72,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 2 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 70,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 3 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 76,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 4 - Type: FH 630 SX - Year of Manufacture: 2008 - Control: Fanuc 31i - Spindle running time: approximately 65,000 hours - Tool magazine: Fanuc FTS3 ...

x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmTable dimensions: 1300 x 600 mmtable load: 1,0 ttool taper: ISO 40 DIN 69871Aspindle turning speed range: 60 - 12000 U/minrapid traverse: 32 m/minpower capacity: 10 / 17 kWno. of tools in the magazine: 32 Stücktool length - max.: 300 mmTool diameter: 76 / 127 mmweight of tools max.: 8 kgtool changing time: 2,5 sectotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mmMachine with only 3.275 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2165 mmy-travel: 1600 mmz-travel: 1345 mm: 2300 mmTurning Speed of the Rolls: 2300 x 1684 mm: 7000 kgnotching width: 300 1/min: 0,0001 °Positioning speed: 10000 1/min: 37 /30 kW: 150 °Feeds (X,z,u,w-axis): 0,0001 (360°) °: ISO 50 : 42 Control: Mazatrol Smooth X Rapid Travel X / Y / Z-Achse: 42 m/mintotal power requirement: 141 kVAweight of the machine ca.: 51,5 tdimensions of the machine ca.: 4,4 x 5,2 , 7,8 m5-axis multitasking machine featuring:- Mazatrol Smooth X CNC control- Direct-drive table with C-axis accuracy of 0.0001°- Milling spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 450 mm: 500 mm: 900x450 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1100 mm: 650 mm: 610 mm: 1200x6000 mm: BBT 40 : 12.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 460 mmz-travel: 460 mmcontrol: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 14 / 10 kWTorque: 89 / 63,7 Nmtool taper: SK 40 work table:: table surface area: 900 x 410 mmmax. table load: 350 kgT-slots: 4x Tool-Presetter:: number of toolpositions: 24 pos.max. tool diameter: 130 mmmax. tool length: 200 mmmax. tool weight: 8,0 kgfeeds:: rapid traverse ( X / Y / Z ): 36 m/mintotal power requirement: 20 kVAweight of the machine ca.: 3,3 tdimensions of the machine ca.: 3,0 x 2,5 x 2,9 mDocuments: digital Chip-Tray: Automatic Tool Changer: Coolantsystem: interface 4. axis: work light: test probe: Blum TC 50 elektr. hand wheel: integriert / integratedTailstock: TTS-125 indexing attachment: CNC Machiningcenter VerticalSPINNER - VC 750The data for this ad was created with ModulMWS - the soft ...

bore capacity in steel (diameter): 50 mmarm length: 1100 mmbore capacity in cast iron: 60 mmquill stroke: 300 mmtool taper: MK 5 speeds: 22 - 1000 U/minfeeds: ja mm/UBoring motor: 4,5 kwtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 2,1 x 0,9 x 2,85 mRadial drilling machine- Box table 750 x 750 x 500 mm- Coolant system- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: total power requirement: --- kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: total power requirement: --- kWweight of the machine ca.: 6,8 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2600 mmy-travel: 1100 mmz-travel: 920 mmtool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kWweight of the machine ca.: 26,1 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 (875) mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain TNC 430 turning speeds: 20-7.000 U/minfeed: 0-15.000 mm/mintool change unit: 16-fach rapid power traverse in X-and Z direction: 15 m/mintool taper: SK 40 table surface area: 900 x 528 mmmax. table load: 400 kgspindle diameter in front bearing: 55 mmswivellable: 0-90 °quill stroke: 75 mmspindle hours: 9.546 htotal power requirement: 12/7,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 4 x 3,6 x 2,2 mHERMLE U 630T 3-axis machining centre, built in 1999The X-axis, with a stroke of 630 mm, can be extended to 875 mmby swivelling the tool changer out of the way.Accessories:Tool holders, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 550 mmz-travel: 300 mmControl: RMS6V3.15 tool change unit: 25-fach tool taper: HSK E40 turning speeds: 42.000 U/mintable-size: 860 x 550 mmtable load: 800 kgtotal power requirement: 14 kWweight of the machine ca.: 5200 kgdimensions of the machine ca.: 2,5 x 2,1 x 2,55 m3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001Key specifications:Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.).The machine is fully operational, well-maintained, serviced and powered up (battery maintenance).• Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023)• Control system: Röders, software: RMS6V3.15 (211)• Operating system: Windows NT• Complete s ...

x-travel: 2050 mmy-travel: 520 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 4302x 32-fold tool changercoolant device2x chip conveyormeasuring feelerThe hole X-axis travel is 2050mm. You can work in one move 2 meters.A dividing wall is also with the machine. Then the X-travel will be split.Technische Daten / technical details:X-Weg / X-travel 2050 mmY-Weg / Y-travel 520 mmZ-Weg / Z-travel 520 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpmWerkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kWGewicht ca. / weight 12800 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the ...

x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmthroat: 300 mmbore stroke: 150 mmdistance spindle /table: 60-765 mmdistance spindle/base plate: 1.200 mmtaper MK: 3 threading: M20/M24 column diameter: 115 mmtable-size: 510 X 425 mmspindle turning speed - stepless: 60 - 1:400 U/mintotal power requirement: 1,4 kWweight of the machine ca.: 350 Kg.dimensions of the machine ca.: 1,9 x 0,6 x 0,9 m- Digital spindle speed display- Foot switch- Thread cutting device- Left-right rotation- 2-speed motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): / mmthroat: / mmbore stroke: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmarm length: 700 mmworkpiece height max.: 1300 mmtool taper: MK3 feeds: 0,1-0,3 mm/Uspindle turning speed range: 100-1.220 U/mintotal power requirement: 1,4 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 mIncl. cube tableIncl. drilling feedMechanical clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mmthroat: 1000 mm: 1000/2800 mm weight: 3,7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmtotal power requirement: kWweight of the machine ca.: 8800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmarm length: 1.600 mmworkpiece height max.: 1.200 mmdistance spindle/base plate: 320 - 1.220 mmspindle taper MT: 5 quill stroke: 315 mmthroat min.: 350 mmthroat max.: 1.600 mmquill feed: 0,04 - 3,20 mm/Udrive capacity - spindle motor: 4,0 kWspindle turning speed range: 25 - 2.000 U/mincolumn diameter: 350 mmvoltage: 400 Vtotal power requirement: 6,5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,45 x 1,00 x 2,65 m- Serial-No.: 4045935- Clamping cube 630 x 500 x 500 mm- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.