Processing Centers used for sale (227)

Key data: 600 mm, 600 mm, 600 mm

Horizontal, two-spindle machining center in 4th axis design with swivel beam. Swivel beam 0/ 180 ° Tool holder HSK 100 Spindle speed range up to 10,000 1/min Power 2 x 38 KW Tool magazine 2 x 40 tool positions Spindle spacing 600 mm CNC Control 840D Chip conveyor Coolant system central

number of spindle speeds: 18.000 U/minNC rotary indexing table Ø: 630 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The machine has only 13.924 H spindle hours.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-spindle machining center SW BA322, SW BA322, year of construction 2020, machine no. 2330587, tool holder HSK 63, 64 mm tool changer, with minimum quantity lubrication (servo motor loading door missing)

number of spindle speeds: 10.000 U/minNC rotary indexing table Ø: 630 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 610 mm, 508 mm, 610 mm

Hurco VMX 24 with WinMax controller and IKZ With Lehmann 4th axle Year of construction 11/ 2007 Commissioning 2008 Approx. 28000 switch-on hours Machine runs well and can be used immediately. Viewing under power possible by arrangement. Sales on behalf of the customer

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmcontrol: iTNC 530 HeidenhainNC-Swivle milling head:: turning speed range - main spindle: max. 24.000 min/-1power capacity - main spindel: 19 / 26,7 kWmax. Torque: 85,6 / 60,9 Nmtool taper: HSK-A 63 swivellable: NC: +30 / -120 °NC-Rotary table:: table surface area: 1.000 x 600 mmtable diameter: Ø 600 mmT-slots: 1x 14 x H7, 8x 14 H12 max. table load: 500 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x12 (24) pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmtotal power requirement: 49,7 kVAweight of the machine ca.: 6,8 tdimensions of the machine ca.: 4,5 x 4,5 x 2,5 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: 20 bar, 40 l/min through spindle coolant: turning milling head: elektr. hand wheel: Spray gun: exh ...

Key data: 711 mm, 406 mm, 392 mm

Offer a well-maintained Haas Mill DT 2 machining center with few power-on hours. Machine is in good condition and can be viewed under power by arrangement. Tool magazine 20 places Speed 10000 rpm Intake MK30 Approx. 50 tool holders are included. Travel x-y-z 711mm-406mm-392mm For more data, see pictures.

x-travel: 850 mmy-travel: 520 mmz-travel: 475 mmControl: 840D sl Operate (CELOS) SiemensMain spindle:: turning speed range - main spindle: 20 - 14.000 min/-1power capacity - main spindel: 20,3 / 14,5 kWmax. Torque: 121 / 84 Nmtool taper: SK 40 DIN69871work table:: table surface area: 1.160 x 570 mmmax. table load: 1.000 kgwork height max.: 800 mmtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 DIN69871max. tool diameter: 80 / (130) mmmax. tool length: 300 mmchange-time chip to chip: 5,9 secfeeds:: rapid traverse ( X / Y / Z ): 42 m/minfeed speeds: max. 36.000 mm/minfeed power: 6,5 kNAccelaration: 5 m/s²total power requirement: 18 kVAweight of the machine ca.: 6,7 tdimensions of the machine ca.: 5,5 x 3,5 x 2,8 mDocuments: Chip conveyor: Coolantsystem: 245 l through spindle coolant: 20 bar direct travel-measuring-system: Spray gun: elektr. hand wheel: Tool Maga ...

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 7,600 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 minimum quantity spraying Tensioner detection and automatic displacement 8 pneumatic material clamps Pendulum operation through two light barrier areas Spindle in mint condition (15.5 kN pull-in force) Elusoft dongle for programming on an external PC Loading is included in the price

Number of machnines: 10 0Cycle time: . /minproduction capacity: . Control: . Everything must go due to business closure: High-quality machining centers (Deckel Maho, DMG, Mazak, Spinner) & accessories, cabinets, vices, material, grinding machines, EDM machine, measuring machine, on July 16, 2026Dear Sir or Madam, dear business partners and interested parties,Due to the complete liquidation of the mechanical engineering company Schröter Maschinenbau GmbH, we are organizing an exclusive, one-day sale for the entire company, machine, and workshop equipment. Take this opportunity to acquire professional production facilities and extensive accessories directly from the location.Prospectus & Sale Overview:• Date: Thursday, July 16, 2026• Time: 9:00 AM to 2:00 PM• Address: Lenneperstr. 188, 42855 Remscheid• Type of Sale: Direct sale against cash payment / or upon pickup and ...

Key data: 6400 mm, 400 mm, 380 mm

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 6400 mm Max. travel Y-axis: 400 mm Max. travel Z-axis: 380 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material tensioners Pendulum operation possible Light barriers

x-travel: 2165 mmy-travel: 1600 mmz-travel: 1345 mm: 2300 mmTurning Speed of the Rolls: 2300 x 1684 mm: 7000 kgnotching width: 300 1/min: 0,0001 °Positioning speed: 10000 1/min: 37 /30 kW: 150 °Feeds (X,z,u,w-axis): 0,0001 (360°) °: ISO 50 : 42 Control: Mazatrol Smooth X Rapid Travel X / Y / Z-Achse: 42 m/mintotal power requirement: 141 kVAweight of the machine ca.: 51,5 tdimensions of the machine ca.: 4,4 x 5,2 , 7,8 m5-axis multitasking machine featuring:- Mazatrol Smooth X CNC control- Direct-drive table with C-axis accuracy of 0.0001°- Milling spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 18,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm Minimum quantity spraying Autonomous tensioner displacement 20 pneumatic material tensioners Pendulum operation through two light barrier areas Label Printers Barcode scanner Chip conveyor belt Suction Manual control panel Spindle in mint condition (pull-in force is just under 16 kN) Loading is included in the price Weight: approx. 14,000 kg

x-travel: 735 mmy-travel: 650 mmz-travel: 560 mmcontrol: 840D sl FD operate SiemensMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 35 / 24 kWmax. Torque: 119 Nmtool taper: HSK-A63 DIN 69893swiveling-rotary-table:: table diameter: 680 mmmax. table load: 600 kgmax. workpiece sizes: 650 x 650 x 500 mmswivellable: +/- 120 °rotatable: 360 °tool magazin:: number of toolpositions: 30 pos.tool taper: HSK-A63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 160 mmmax. tool length: 315 mmmax. tool weight: 8,0 kgchange-time chip to chip: ca. 4,9 secfeeds:: feed speeds: max. 40.000 mm/minrapid traverse: 40 m/mintotal power requirement: 65 kVAweight of the machine ca.: 11,6 tdimensions of the machine ca.: 4,0 x 3,0 x 2,95 mDocuments: Chip conveyor: Coolantsystem: 600 L through spindle coolant: 40 bar paper band filter: test probe:  ...

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

x-travel: 800 mmy-travel: 530 mmz-travel: 510 mmControl: MSC 504 Mori SeikiMain spindle:: turning speeds: max. 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle bearing diameter: 70 mmdistance spindle /table: 150 - 660 mmwork table:: table surface area: 1.100 x 600 mmmax. table load: 800 kgT-slots: 6x 18 mmtable height over floor: 900 mmturret:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,3 secchange-time chip to chip: 4,1 - max. 9,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 20 m/minfeed speeds: max. 6.000 mm/minTipp feed: 1 - 5.000 mm/mintotal power requirement: 27 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 3,5 x 3,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: high press ...

BAU DMU 50 T BJ 2001

x-travel: 800 mmy-travel: 530 mmz-travel: 510 mmControl: MSC 504 Mori SeikiMain spindle:: turning speeds: max. 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle bearing diameter: 70 mmdistance spindle /table: 150 - 660 mmwork table:: table surface area: 1.100 x 600 mmmax. table load: 800 kgT-slots: 6x 18 mmtable height over floor: 900 mmturret:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,3 secchange-time chip to chip: 4,1 - max. 9,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 20 m/minfeed speeds: max. 6.000 mm/minTipp feed: 1 - 5.000 mm/mintotal power requirement: 27 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 3,5 x 3,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: high press ...

TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg

number of spindles: 25 -1500 U/min Stufenlosbore capacity in steel (diameter): 23 mmbore stroke: 120 mmtable clamping surface:: 1250 x 340 mmtaper MK: MK3 total power requirement: 2 kWweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal machining center Manufacturer: Makino Type: a51-A60 Year of Make: 2004 Control: CNC FANUC System 16 iM Travel: X/Y/Z: 560 x 560 x 500 mm Distance from table centre to spindle nose: 70 – 570 mm Swivel height from pallet surface max.: 900 mm Permissible swivel space in the working area: 630 mm Tool magazine: 60 memory locations Max. loading weight: 180 kg T command can be freely assigned to 4 digits Tool change time: 0.9 sec. Tool dimensions max.: Ø 70 mm, 360 mm long Tool weight max.: 8 kg Spindle unit 50 – 12,000 min/min. Spindle unit with tool holder f. Cone hollow shafts according to DIN 69893 HSK-A63 Tool tightening force: 29 kN Pallet changing system, integrated into the machine Pallet change time: 7 sec. Pallet changer with storage of the 2 pallets in the Alternating cycle on storage station Pallet holder rotatable, index 90°  ...

x-travel: 760 mmy-travel: 460 mmz-travel: 460 mmcontrol: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 14 / 10 kWTorque: 89 / 63,7 Nmtool taper: SK 40 work table:: table surface area: 900 x 410 mmmax. table load: 350 kgT-slots: 4x Tool-Presetter:: number of toolpositions: 24 pos.max. tool diameter: 130 mmmax. tool length: 200 mmmax. tool weight: 8,0 kgfeeds:: rapid traverse ( X / Y / Z ): 36 m/mintotal power requirement: 20 kVAweight of the machine ca.: 3,3 tdimensions of the machine ca.: 3,0 x 2,5 x 2,9 mDocuments: digital Chip-Tray: Automatic Tool Changer: Coolantsystem: interface 4. axis: work light: test probe: Blum TC 50 elektr. hand wheel: integriert / integratedTailstock: TTS-125 indexing attachment: CNC Machiningcenter VerticalSPINNER - VC 750The data for this ad was created with ModulMWS - the soft ...

BAZ Cover Maho DMC 63V BJ 2001

x-travel: 500 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: 3800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. machining length: 2,600 mm Y-axis travel: 315 mm Travel Z-axis: 230 mm Speed of milling spindle infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping X and Y-axis CNC controlled, Z-axis infinitely adjustable motorized 4 pneumatic material tensioners Manual tool change Minimum quantity spraying device USB port Instruction manual

x-travel: 800 mmy-travel: 1.050 mmz-travel: 800 mmcontrol: 840D solutionline SiemensMain spindle:: Speed Mainspindle: max. 10.000 min/-1power capacity - main spindel: 44 kWmax. Torque: 288 Nmtool taper: HSK-A 100 DIN 69893Swivel range: -10° / +180 °NC-Rotary table:: table surface area: dia. 900 x 700 mmmax. table load: 1.500 kgdistance spindlenose - table horizontal: 50 - 850 mmdistance spindlenose - table vertical: 150 - 950 mmtable speed: 35 min/-1rotatable: C: 360 °Tool-Presetter:: number of toolpositions: 120 pos.tool taper: HSK-A 100 max. tool diameter: 110 mmmax. tool-dia with free toolbox: 230 mmmax. tool length: 550 mmmax. tool weight: 30 kgtool changing time: 5,4 secfeeds:: rapid traverse ( X / Y / Z ): 60 m/minRapid B-Axis: 23 min/-1Accelaration: 7 / 6,5 / 6,5 m/s²Feed force ( X / Y / Z ): 13 / 13 / 9 kNweight of the machine ca.: 13,0 tdimensions of the machine ca.: 6,0 ...

BAZ Johnford FMC 850 for sale The machine is built in 1999 and can be viewed under chipboard. Enclosed is a type picture of the machine! Available in mid-June!

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmtotal power requirement: kWweight of the machine ca.: 8800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Hurco VMX 24 t

x-travel: 650 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840 D pl SiemensMain spindle:: turning speed range - main spindle: 20 - 28.000 min/-1power capacity - main spindel: 23 / 18 kWmax. Torque: 79 Nmtool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mmSwivel range: A: +30° / -115 °rotatable: C: 360 °max. table load: 500 kgmax. workpiece sizes: Ø 630 x 313 mmtable speed: A:25 / C:65 min/-1Tool-Presetter:: number of toolpositions: 117 pos.max. tool diameter: 90 (125) mmmax. tool length: 300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 m/minAccelaration: 10 m/s²feed power: 8,5 kNtotal power requirement: 43 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 6,5 x 4,5 x 3,0 mDocuments: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 pos. full splash guard ...

Key data: 1630 mm, 860 mm, 760 mm

Basic machine data Used 3-axis machining center from HURCO Make: HURCO Type: VMX64 Year of Make: 2006 Condition: Used - In working order Control: Name: HURCO Ultimax 4 CNC Track Control Drive power: 285 kW Travels: x-travel: 1630 mm // y-travel: 860 mm // z-travel: 760 mm Technical data: • Spindle 25-8000 rpm • SK 50 interface • Clamping table size: 1650 mm x 9000 mm • 32-fold tool changer • Feed range: 1-18000 mm/min • IKZ • Dividing head type Kitagawa NC 300 rotary and swivel table • Chip conveyor The machine is in good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

x-travel: 650 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840 D pl SiemensMain spindle:: turning speed range - main spindle: 20 - 28.000 min/-1power capacity - main spindel: 23 / 18 kWmax. Torque: 79 Nmtool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mmSwivel range: A: +30° / -115 °rotatable: C: 360 °max. table load: 500 kgmax. workpiece sizes: Ø 630 x 313 mmtable speed: A:25 / C:65 min/-1Tool-Presetter:: number of toolpositions: 117 pos.max. tool diameter: 90 (125) mmmax. tool length: 300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 m/minAccelaration: 10 m/s²feed power: 8,5 kNtotal power requirement: 43 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 6,5 x 4,5 x 3,0 mDocuments: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 pos. full splash guard ...

5 axle BAZ Makino D500 BJ 2010

x-travel: 1050 mmy-travel: 570 mmz-travel: 510 mmControl: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1power capacity - main spindel: 16,5 / 11 kWmax. Torque: 141 Nmtool taper: BT 40 distance spindle /table: 150 - 775 mmwork table:: table surface area: 1300 x 570 mmmax. table load: 1000 kgtool magazin:: number of toolpositions: 40 pos.tool taper: BT 40 max. tool diameter: 80 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,2 secchange-time chip to chip: 3,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/minworkpiece height max.: 590 mmtotal power requirement: 40,9 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,5 x 3,1 x 2,98 m3-axis vertical CNC machining center- Siemens 828D CNC control and workshop-oriented programming supportShop Mill- 40-tool tool changer (BT 40)- Basic cooling system / spin ...

4 controlled axes for profile processing X-axis travel: 7,200 mm A-axis rotation: 0°-180° Speed range: 0-18,000 rpm Tool changer with 8 places on the machine plus additional tool changer in bed Automatic tensioner shift Profile machining Generation X, with Schüco CAM software and controllable About SchüCal+ - Calculation Program Operating hours: Machine in: 15605 hrs / NC in: 3691 hrs Accessories / Equipment: Standard Tool Set (Used) 5.5 KW Spindle (New spindle frequency converter) (New PC / Controller) The machine is overhauled, dimensioned and available for immediate delivery. Weight: approx. 5,000 kg

surface area: 1168 x 508 mmmax. table load: 1800 kgtravel -x axis: 1016 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle taper: SK40 spindle speed: 10000 U/minspindle capacity: 15 kWspindle torque max.: 99 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 20 kWweight of the machine ca.: 4,15 tdimensions of the machine ca.: 3,7 x 3,3 x 2,5 mThe machine is like new !, only 61 spindle hoursTool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 762 mm, 508 mm, 610 mm

Hurco VMX 30 Year 04/2007 Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Spindle holder SK 40 Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Control HURCO WinMax ver. V8 01.09.25... Options see pictures Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m Interior was painted, scrapers of the telescopic covers were renewed. Machine can be viewed under power by appointment. Price is net plus VAT. Freely loaded onto trucks

surface area: 1321 x 610 mmmax. table load: 1800 kgtravel -x axis: 1270 mmtravel -y axis: 508 mmtravel -z axis: 508 mmspindle cone: SK40 number of spindle speeds: 12000 U/minspindle capacity: 15 kWspindle torque max.: 82 Nmrapid traverse y/x/z axis: 28 m/mincontrol: HURCO MAX5 total power requirement: 21 kWweight of the machine ca.: 4,25 tdimensions of the machine ca.: 4,1 x 3,35 x 2,6 mthe machine is like new!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 630 mm, 630 mm

Spindle replacement 12/2018 Technical data: Manufacturer: Heller Type: H1000 Control: Siemens 840D SL Year of construction: 2008 (commissioning 2010/11) Travel X/Y/Z: X 630 mm, Y 630 mm, Z 630 mm Travel B-axis: 360° Working spindle Speed: 10,000 rpm (Kessler) Tools Tool changer: 54-fold Tool holder: SK40 Pallet changer: 2-fold Pallet size L/W: 500 x 400 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring system Drill Break Detection Chip conveyor Knoll coolant system with high pressure

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmcontrol: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 8300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 900 mm, 650 mm

Double-spindle machining center with swivel beam for mounting tension bridges Spindle spacing 800 mm Spindle speed up to 12,500 1/min Power 10% - 40% - 100% ED = 42 / 35 / 28 KW Torque 10% - 40% - 100% ED = 200/ 165/ 135 Nm Tool changer 2 x 42 tool positions Tool holder HSK 80 Rapid traverse 120 m/min - CNC control Siemens 840 Dsl - Central coolant facility

x-travel: 650 mmy-travel: 520 mmz-travel: 475 mmcontrol: Heidenhain TNC 530 tool adaptor: turning speeds: 15000 U/minspindle motor: 25/35 kWtool change unit: 30 pos.table surface area: 630 X 500 mmworkpiece weight: 300 kgc-axis: 360 (0,001) °A-Axis: -35 / +110 °rapid traverse: 42 m/minfeed: 10 m/mintotal power requirement: 31 kVAdimensions of the machine ca.: 3,3 x 2,2 x 2,78 mtotal wight: 7,5 t5-Axis Machine ausgestattet mit:- CNC Control Hiedenhain TNC 530 / DMG ERGOLine- elektr. Handwheel- NC-Rotary / swivelling Table- Coolat- Vollkabine- ATC 30-fold- Renishaw Measuring - Chip Conveyor- 3D-Quick-SetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Heckert CWK 800 BJ 1999

x-travel: 2100 mmy-travel: 2100 mmz-travel: 1250 mmspindle motor: 20 kWspindle turning speed range: 24000 U/mintool taper: HSK A 63 b-axis: -70 / +180 °table diameter: 1700 mmtable load: 8 tFeed speed: 60 / 40/ 40 m/min.rapid traverse: 60 / 40 / 40 m/minControl: Heidenhain iTNC 530 total power requirement: 89 kVAweight of the machine ca.: 41 tdimensions of the machine ca.: 9,8 x 7,5 x m- CNC Control Heidenhain iTNC 530- Tool Changer 93-fold (HSK A 63)- Motor Spindle / Pick-Up Spindleapprox 40900h Working Hours and 27100 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2022 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

x-travel: 1100 mmy-travel: 650 mmz-travel: 550 mmControl: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mmMain spindle:: turning speed range - main spindle: 10 - 20000 min/-1power capacity - main spindel: 22 / 11 kWmax. Torque: Nmtool taper: BT 40 work table:: table surface area: 1200 x 650 mmmax. table load: 800 kgTool-Presetter:: number of toolpositions: 30 pos.tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1500 mm/mintotal power requirement: 48,55 kVAweight of the machine ca.: 10 tdimensions of the machine ca.: 3,65 x 3,30 mCNC Machining Center Vertical- CNC control Fanuc 31i-MB- ATC 30-fold (BT 40)- Chip Conveyor- Tool Measure- Mold Option- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.