Column-Type Drilling Machines used for sale (163)

ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 €: 296.47 €: 40 mm: MK 4 : 300 mm: 1,5 / 3,0 kW: M30 : 610 mm: 850 mm: 1920 mm: 440 kg: 0 - 300 mm/U: 160 mm: 125 mm: 150 - 700 mm: 590 x 450 mmDisplay with the following functions:- Selection of operating mode: manual drilling / drilling with feed / tapping- Spindle speed- Feed rate- Zero point setting- Drilling depth- Piece counter- Chip breaking mode- Jump switch mode (for efficient drilling of square tubes)- Spindle stop (automatically stops the spindle after the drilling cycle)- Free cutting time modeDrilling capacity / normal drilling performance 35/40 (in E335/ST60)Automatic feedDrilling depth adjustment with fine adjustment and undervoltage triggerEMERGENCY STOP pushbuttonStepless speed controlConnection cable (1.5 m) with CEE plugDrill protection with electr. FuseThermal overload protection3 years warranty for single sh ...

ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg

bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 180 mmturning speeds: 55 - 1450 U/mintaper MK: 4 column diameter: 145 mmtotal power requirement: 2,2 kWweight: 500 kgdimensions: 800 x 1000 x 2000 mmFeatures:- Heavy-duty pillar drill - Infinitely variable speed control (V-belt)- Automatic spindle feed with electromagnetic engagement - Pole-changing motor- Right/left rotation of the drill spindle - Fixed drilling depth stop- Machine table with 2 T-slots height-adjustable via hand crank- Coolant system- Machine vise- Drill chuck- Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALZMETALL column drilling machine AB 3 ES -Well-maintained original condition -Drilling capacity / steel max. 35mm -Projection approx. 280mm -Table size approx. 600x470mm -Drilling stroke approx. 180mm -Cone mount MK 3 -Stepless speed regulation -Speed range 65 - 1750 rpm -Drilling depth stop -Spindle protection device -Not /Off -Footswitch -Analogue speed display -Drill chuck -Documentation Dimensions: LxWxH 1.2x0.8x2 meters / Weight approx. 500Kg

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 €: 132.01 €: 25 mm: MK 3 : 250 mm: 245 - 4000 U/min: 0,7 / 1,3 kW kW: M18 : 400 mm: 655 mm: 1900 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingtool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm

Column drilling machine Drilling capacity in ST 60 Ø40 mm Drilling spindle holder MK-4 Drilling depth 160 mm Drilling table surface 590 x 450 mm Min. spindle speed 700 1/min Maximum spindle speed: 1,400 1/min Length: 1096 mm Width 637 mm Height 2120 mm Weight 470 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 €: 173.12 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: 380 mm: 600 mm: 2060 mm: 260 kg: 100 mm: 170 - 660 mm: 1.216 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality geardrive machine2 automatical feedLeft-right drillingAutomatic tool ejectorAdjustable depth stopTable with T-slotsDrill guard with micro switchLightening equipmentUser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alzmetall AC 32 Turret Double Head In-Line Drilling Machine Extremely robust and rare double-head in-line drilling machine based on two Alzmetall AC 32 drill tops. This system is a high-quality industrial design designed for highly efficient series or step machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g. centering, drilling, countersinking, threading) without the need to manually retool tools. Technical data & equipment (per capita / total system): Manufacturer of drill tops: Alzmetall (Germany) Model: AC 32 (electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x swivelling turret heads with several stations Machine table: Solid, ground cast iron table with T-slots for flexible constru ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 €: 209.86 €: 35 mm: MK 4 : 300 mm: 132-194-277-319-466-666-8 U/min: 1.5 kW: M27 : 755 mm: 480 mm: 2205 mm: 385 kg: 125 mm: 90 - 890 mm: 1250 mm: 400 x 420 mm: 150 mmManual feedGeared driveHardened and ground high quality steel gearsSpeed plate and selecting levers on head frontDepth scale and adjustable depth stopThermomagnetic switchEmergency STOP push buttonSpindle reversing switchWorklightFixed tableSafety drill guard with microswitchCE markOPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-slots in the base plate (ERB)ERLO BX- ...

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 €: 257.84 €: 1 : 30 mm: MK 3 : 280 mm: Stufe 1: 125 - 4000, Stuf U/min: 0,9 / 1,45 kW kW: M20 : 820 mm: 520 mm: 1900 mm: 320 kg: 0 - 300 mm/U: 240 - 790 mm: 420 x 340 mm: 125 mmDrilling capacity / normal drilling performance25/30 (in E335/ST60)Automatic feedDigital speed-, drilling depth and feed displayDrilling depth adjustment with fine adjustment and undervoltage triggerEMERGENCY STOP pushbuttonStepless speed controlTable height adjustment via toothed rackConnection cable (1.5 m) with CEE plugDrill protection with electr. FuseThermal overload protectionElectronically infinitely variable feed incl. Spindle monitoringFree cutting deviceThread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth displayDrilling depth shut-off, programmable, easy operationDrilling ...

Tool holder MK 4 Drilling capacity up to 40 mm steel Clockwise and counterclockwise rotation Stepless speed adjustment with display Automatic feed

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 6939.26 €: 133.93 €: 20 mm: MK 2 : 260 mm: 30 - 3000 U/min: 1,5 kW: M12 : 430 mm: 715 mm: 1800 mm: 290 kg: 100 mm: 110 mm: 230 - 850 mm: 420 x 340 mmDrilling capacity / normal drilling Performance 20/23 (in E335/ST60)Main switchTapping attachementControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationArt. - No. 223.020 R1 (20-2,000 1/min)Art. - No. 223.025 R2 (30-3,000 1/min)OPTIONS (PRICES ON REQUEST):Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created  ...

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7035.46 €: 135.78 €: 25 mm: MK 3 : 280 mm: 125 - 4000 (2 Stufen) U/min: 0,9 / 1,45 kW: M20 : 520 mm: 820 mm: 1900 mm: 275 kg: 125 mm: 110 mm: 240 - 790 mm: 420 x 340 mmDrilling capacity / normal drilling performance 25/30 (in E335/ST60)Drilling depth adjustment with fine adjustmentEmergency stop pushbuttonUndervoltage releaseelectr. Drilling machine guardManual reversing switch for clockwise and anticlockwise rotationConnection cable (1.5 m) with CEE plugThermal overload protectionOPTIONS (PRICES ON REQUEST):Drill package (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 8144.6 €: 157.19 €: 25 mm: MK 3 : 280 mm: 125 - 4000 (2 Stufen) U/min: 0,9 / 1,45 kW: M20 : 520 mm: 820 mm: 1900 mm: 275 kg: 125 mm: 110 mm: 240 - 790 mm: 420 x 340 mm: 125 mmDrilling capacity / normal drilling performance 25/30 (in E335/ST60)Drilling depth adjustment with fine adjustmentDigital drilling depth and speed displayEmergency stop pushbuttonUndervoltage releaseelectr. Drilling machine guardManual reversing switch for clockwise and anticlockwise rotationConnection cable (1.5 m) with CEE plugThermal overload protectionOPTIONS:Drill package (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 300 x 440 x 500 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 €: 138.19 €: 30 mm: MK 3 : 250 mm: 245 - 4000 U/min: M25 : 400 mm: 655 mm: 1185 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingautomatic tool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm  ...

: 20 bore stroke: 80 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 210-2.500 UpMtotal power requirement: 0,38 kWOverall size: 620x470x1050 mmweight of the machine ca.: 80 kgStandard equipment:- Number of speed ranges 10 steps- Movable LED machine light- Swivel work table +/- 45 degrees- Mains cable and plug ready for immediate use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- In accordance with current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column Drill MAXION / IXION BS 25 ST - G -Well-groomed general condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Tapping device up to M20 -Spindle holder / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Projection 260mm -Speed range / infinitely variable 120-2160 rpm -Automatic feed - Work table size 500x365mm -Column diameter 110mm -Spacing/Spindle Table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: LxWxH 0.8x0.5x2 meters / Weight 300Kg

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 €: 325.63 €: 40 mm: MK 4 : 360 mm: 61 - 1.169 (9) U/min: 2.2 kW: M33 : 550 mm: 950 mm: 2363 mm: 610 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 200 mm: 175 mm: 35 - 835 mm: 1240 mm: 550 x 550 mm: 950 x 550 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEautomatic feedgear drivefixed machine tabletiltable turntablefront wheel for sensitive fine feedcoolant equipmentlightingOPTION (PRICE ON REQUEST):Manual tapping system ALTERNATIVE:ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

: 32 mmbore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgStandard equipment:- Stepless speed adjustment- Coolant device in the machine base- Movable LED machine light- Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm- Mains cable and plug ready for immediate use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- According to current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions LxWxH 0.8x0.6x2 meters / Weight 450Kg

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 €: 193.73 €: 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: M24 : 665 mm: 640 mm: 2100 mm: 260 kg: Automatisch 0,10 - 0,20 - mm/U: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 665 x 400 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine3 aut. feedsleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMANIncl. following optional equipment:lighting equipmentcoolant equipment and machine base with T-slots(symbol photo)OPTION (PRICE ON REQUEST):reverse for tappingTime of delivery with options: approx. 8 weeksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

bore capacity in steel (diameter): 34 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron (diameter): 40 mmthread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/mincolumn diameter: 125 mmautomatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mmDrive: Keilriemen total power requirement: 3 kWweight of the machine ca.: 360 kgdimensions of the machine ca.: 2,3 x 0,6x 1,1 m- Drilling machine of circular column feed automaticmechanical- Drive by electronic wide V-belt- Spindle taper: CM 4- Stepless speed adjustment with frequency converter- Potentiometer for speed adjustment- digital speed display- Automatic feed reversal when threading- Scale with adjustable drilling depth - automatic tool ejector- Push button for EMERGENCY STOP switch for right/left rotation- Electronic control integrated in the drill head - integrated coolant system- Machine light - hei ...

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

bore capacity in steel (diameter): 30.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 225 - 4300 U/mincolumn diameter: 115 mmdistance spindle /table: 132 / 724 mmengine output: 1.0 / 1.6 kWweight: 260 kgMachine height: 1790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclockwise rotation - stop- Mushroom pushbutton (latching) for EMERGENCY STOP- Main switch, lockable- Rig ...

Key data: 28 mm, 285 mm

Drilling capacity in steel: approx. 28mm Projection approx. 285mm Drilling depth approx. 125mm Spindle mount MK3 Infinitely variable speeds from 130-1150 rpm 3 automatic feeds 0.1 - 0.2 - 0.3mm/rev Table clamping area approx. 500 x 370mm Table adjustable in height via rack Machining base plate approx. 350 x 320mm With motor 1.5kW, 1415 rpm, 380/220V Weight: approx. 380kg Condition and details see pictures

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmfeed: 0.10 + 0.20 mm/UT-slots: 2 x 14 x 224 mmdistance spindle /table: 117 / 701 mmengine output: 1.45 / 1.90 kWweight: 285 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- automatic spindle feed with feed overload protection- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclo ...

Key data: 40 mm, 240 mm

Machine Type: Column Drilling Machine Manufacturer: ERLO Type: TCA40 Year of manufacture: - Condition: used Offer will only be sent if a complete imprint is provided! Price 3.750 incl. 19% VAT / Fixed Price Location Warstein , Germany Reference number M-ERL-0526 DESCRIPTION We offer you a used column drill from the manufacturer Erlo. Performance in steel 40mm Strong gear feed Overall height 2350mm Weight 650kg Incl. solid 160mm machine vise. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

bore capacity in steel (diameter): 36.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 120-900 / 240 - 1780 U/mincolumn diameter: 145 mmtable-size: 615 x 460 mmfeed: 0.1 / 0.2 / 0.3 / 0.4 mm/Utotal power requirement: 1.75 / 2.5 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mm well-maintained condition () current new price approx. 18.000 Euro special price on requestEquipment:- robust pillar drill (V-belt)- electromagnetic feed clutch = spindle feed with overload protection and electrical handle cross circuit- mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel- electric stepless speed adjustment- Digital speed display- clockwise rotation of the drill spindle- pole-changing drive motor- Infinitely adjustable drilling depth stop- Work table with 2x T-slots - height-adjustable- Operating instructions in GermanThe data for this ad was crea ...

Column Drill GILLARDON GB 25 – Precision Column Drill For sale is a high-quality column drill from the renowned manufacturer Gillardon, model GB 25. The machine impresses with its robust design, precise operation and versatile applications and is ideal for workshops, locksmiths, metalworking as well as drilling and threading work. ⸻ General information: • Machine type: Column drilling machine • Manufacturer: Gillardon • Model: GB 25 • Condition: Used, good general condition, fully functional • Availability: Immediately available ⸻ Technical data: • Drilling capacity steel: 32 mm • Casting drilling capacity: 35 mm • Speed range: infinitely variable 60 – 1800 rpm • Direction of rotation: clockwise/counterclockwise rotation • Tool holder: Morse taper MK 3 • Projection: 290 mm • Quill stroke: 175 mm • Table surface: 450 × 360 mm  ...

bore capacity in steel (diameter): 32.0 mmbore capacity in cast iron: 36.0 mmthroat: 280 mmbore stroke: 150 mmturning speeds: 80 - 1400 U/mintable-size: 400 x 550 mmmorse taper: MK 3 feed: 0.1-0.2-0.3 mm/Utotal power requirement: 1.1 / 2.0 kWweight of the machine ca.: 350 kgrange L-W-H: 800 x 600 x 1900 mmFurnishing :- Column drilling machine - Drive: V-belt- automatic spindle feed (0.1/0.2/0.3 mm/rev)- Pole-changing drive motor- Work table with T-slots- Height adjustable via hand crank- machined base plate with T-slots- adjustable drilling depth stop- Connection cable + 16A plug Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9103736The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a heavy and robust industrial column drill from the manufacturer Perfect, model BF 40 VS. The machine impresses with its solid cast construction, high stability and reliable technology. Thanks to its automatic feed and variable speed control, it is ideal for metalworking, mechanical engineering, locksmithing, repair shops or training workshops. The machine is in used, working condition with signs of wear and tear. General information Machine Type: Industrial Column Drilling Machine Manufacturer: Perfect Model: BF 40 VS Year of Make: 1988 Condition: Used, functional Availability: Immediately available Technical data Drilling capacity steel: 40 mm Threading: up to approx. M30 Spindle holder: MK4 Quill stroke: approx. 180–200 mm Speed range: approx. 50–2000 rpm Feed: automatic Motor power: approx. 2.2–3 kW Operating voltage: 400 V Projection: app ...

bore capacity in steel (diameter): 30 mmthroat: 254 mmbore stroke: 120 mm: 4 Motor output: 9 speeds: 120 - 1810 U/mincolumn diameter: 92 mmtable surface area: 475 x 425 mmtotal power requirement: 1,1 kWdimensions: 915 x 450 x 1705 mmweight: ca. 135 kgColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by  ...

Offer 25511 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - 10 drilling spindle speeds 250 - 2100 rpm - Projection approx. 290 mm - Max. distance table – drilling spindle approx. 620 mm - Table with 2 T-slots height-adjustable 520 x 450 mm - Drive 400 V / 1.0 / 1.3 kW - Space requirement approx. W 600 x H 1850 x D 700 mm - Weight approx. 280 kg

: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 €: 141.86 €: 1 : 23 mm: MK 2 : 260 mm: 20 - 2000 U/min: 1.5 kW: M16x1 : 430 mm: 715 mm: 1800 mm: 290 kg: manuell mm/U: 110 mm: 230 - 850 mm: 420 x 340 mm: 100 mmDrilling capacity / normal drilling capacity 23/25 (in E335/ST60)Manual feedMain switchTapping attachementControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plugOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy Duty Column Drill Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 130 - 480 rpm - Stage 2. 480 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Separate coolant device - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 170 mm: 4 speeds: 70 - 1400 U/mintable-size: 600 x 450 mmtotal power requirement: 3,0 kWweight: 350 kgdimensions: 1200 x 800 x 2150 mmFeatures:- Automatic feed- Coolant device- Infinitely variable speed control- Adjustable fixed depth stop- Drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 35 mm, 280 mm, 180 mm

Column drilling machine ALZMETALL AB 3 ES – Powerful & immediately ready for use For sale is a high-quality column drill from the renowned manufacturer Alzmetall, model AB 3 ES. The machine impresses with its robust design, precise operation and reliable performance. Ideally suited for workshop, metalworking and industrial applications. General information: Machine Type: Column Drilling Machine Manufacturer: Alzmetall Model: AB 3 ES Condition: Used, good general condition, fully functional Shipping time: Immediately available Technical data: Drilling capacity in steel: approx. 35 mm Projection: approx. 280 mm Drilling stroke: approx. 180 mm Recording: MK 3 Speed: Infinitely variable Table size: approx. 600 × 470 mm Equipment: • Drilling depth stop • Drill chuck Machine data: Dimensions (L × W × H): approx. 1200 × 800 × 2100 mm Weight:  ...

bore capacity in steel (diameter): 30 mmthroat: 270 mmbore stroke: 125 mm: 4 Motor output: 9 speeds: 70 - 2800 U/minColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with safety switch Thick-wa ...

Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm

: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 105-2.650 UpMtotal power requirement: 0,75 kWOverall size: 750x450x1745 mmweight of the machine ca.: 192 kgStandard equipment:- Number of speed ranges 9x2 steps- Coolant device in the machine base- Movable LED machine light- Swivel work table with integrated machine vice on the opposite sideopposite side with jaw width 120 mm- Mains cable and plug therefore immediately ready for use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- According to current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Installed power: 0.58 kW Voltage: 380 V Spindle speed: max. 3000 rpm

bore capacity in steel (diameter): 40.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 615 x 430 mmturning speeds: 100 - 1800 U/mincolumn diameter: 145 mmthread: M 24 ST60thread: M 30 GG20feed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 138 / 688 mmengine output: 1.4 / 2.2 kWweight: 470 kgMachine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop i ...