Vertical Processing Centers used for sale (235)

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Machine number: 10394Operating voltage: 415 VFrequency: 50 HzRated current: 29 AConnection: 21 kVAControl: YASNACTool holder: SK 40Table dimensions: 750 x 380 mmwith three groovesTravel X-axis: approx. 500 mmTravel Y-axis: approx. 500 mmTravel Z-axis: approx. 400 mmThe machine is equipped with a tool changer including the tool holders located in the changer, also transformer and two chip conveyorsSpindle speed: 60 - 8000 rpmReference: Hanon - Lot 45 Auction-ID: A7-49056-19

Key data: 500 mm, 450 mm, 400 mm

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear With track control Heidenhain iTNC 530 Year of Make: 2008 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( HSK 63 ) With the following accessories: 2-axis NC swivel rotary table 500mm x 380mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Renishaw OMP 60 Tool measurement in the work area ( BLUM Laser ) IKZ 40 bar with paper belt filter Operating mode 3 + 4 Chip conveyor Signal light 4 colour Rotoclear Sealing air for linear measuring systems Coolant Setup Rinsing gun for chip rinsing 4 Height Adjustable Machine Shoes Operating Instructions

FEHLMANN Picomax 82 CNC-HF CNC milling / machining centre with Heidenhain CNC control, tool magazine and enclosed working area. Robust Swiss/German high precision CNC machine for milling and drilling operations. Auction-ID: A1-49190-56

CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of manufacture: 12/2010 Travel : X 800 Y 600 Z 500 Speed range : 20 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) IKZ 40 bar Scraper belt conveyor Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3D Probe Renishaw Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler 4 Pieces Height Adjustable Machine Shoes Operating Instructions

machine without tools, vices. measuring probe is included View machine on viewing day for correct assessment, machine ready for pick up Auction-ID: A1-48648-5

Key data: 800 mm, 600 mm, 500 mm

CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of Make: 2014 Travel : X 800 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle IKZ 40 bar Scraper belt conveyor Tool measurement in the work area ( BLUM Laser ) Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

CNC Control: Siemens 828DTable dimensions: 750 x 400 mmX/Y/Z strokes: 600 / 400 / 450 mmSpindle speed: 10,000 rpmSpindle power: 7.5 / 15 kWSpindle nose: SK40 / SA40Tool magazine: 24 positionsMax. tool diameter: 80 mmMax. tool length: 280 mmMax. tool weight: 8 kg Fastfeed: 48 m/minPositioning accuracy: ±0.003/300 mmRepeatability: ±0.003 mmPower supply: 400 V, three-phase, 50/60 HzOptions: Rigid tapping, Ethernet/USB, 20 bar IKZ spindle center coolant, electronic crank, spindle coolerYear: 2018Manufacturer: PriminerSerial No.: PR8318Dimensions (mm): 2530 x 1800 x 2350Weight (kg) : 3500 Auction-ID: A1-49171-8

Control OSP 100U Travel X/Y/Z: 560 x 610 x 560 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 60 Wkz., SK 40 Chip conveyor d

  CNC Siemens 840D   Table size 1200 x 800 mm   Movement X 1020 mm Y travel 610 mm Feed Z 620 mm   Centre of spindle to column 670 mm Spindle to table 140 - 760 mm   Column face to table centre 365 - 975 mm   Fast feed of XYZ axis 43 M/min.   Cutting feeds 1 - 10000 mm/min.   Maximum table load 800 Kg   Spindle speed 150 - 12000 rpm   Maximum spindle motor power: 16Kw   Spindle motor duty cycle: 12 kW   BT 40 spindle taper   Tool magazine capacity 24 stations Arm type   Tool change time between tools 2.5 s   Tool change time from chip to chip 3.5 s   Maximum tool diameter 100 mm   Maximum tool weight 8 kg   Coolant capacity 280 l   Plan area W x D x H 2650 x 2750 x 2900   Chip conveyor   High pressure coolant through spindle Auction-ID: A7-49260-1

Manufacturer: AXA Model No.: DBZ Year: 2007 Condition: Used Stock number: 9465 Work table length: 1350 mm Work table width: 600 mm Number of axes: 4 pieces X-axis travel: 2x 750 mm Y-axis travel: 550 mm Z-axis travel: 600 mm In 2022, GO was carried out. Equipment: Technical documentation Chip conveyor Round Table Workpiece feeding Workpiece Remover Handwheel 2x hydraulic power unit for vices

Table Dimensions (mm): 610mm x 370mm X-Travel (mm): 560mm Y-Travel (mm): 400mm Z-Travel (mm): 500mm Number Of Tools In Magazine: 10 Spindle Speed Range: 5 - 8000 rpm Distance Between Spindle & Table (Verticl): 100mm - 600mm Spindle Taper: BT40 Cutting Feed rate: 1 - 20000mm Rapid Traverse Range X,Y,Z: 20M/pm Table load max: 300Kgs Main Drive Power: 15 hp Control: Siemens 802 Foot print W x D x H: 2000mm x 2060mm x 2530mm Weight: 3100Kgs Auction-ID: A7-49260-2

Manufacturer: Hedelius Model: Forte 7 Condition: Used Stock number: 9457 Control system: Siemens Sinumerik Switch-on hours: 2682 h Operating hours: 640 h Work table length: 3080 mm Work table width: 700 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 18000 1/min X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Number of all tools: 45 pieces

Wagner WMC 1800 CNC Machining Center (2013) Manufacturer: Wagner Type: WMC 1800 Year of Make: 2013 Siemens 828 controller Condition: good, used, under production X-travel 1800mm Y-travel 900mm Z-Travel 700mm Tool holder SK40 IKZ 25 bar with belt filter system Tool Measurement Handwheel Documentation Without tools! Auction-ID: A7-49053-7

Key data: 1040 mm, 600 mm, 500 mm

Manufacturer: DMG Model: DMC 104V linear Year: 2006 Condition: Used Stock number: 9445 Control system: HEIDENHAIN iTNC 530 Switch-on hours: 60797 h Hours: 23735 h Work table length: 1250 mm Work table width: 600 mm Maximum table load (uniform): 800 kg Maximum spindle speed: 12000 1/min X-axis travel: 1040 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Cone: SK 40 Tool magazine capacity: 30 Machine height: 2800 mm Machine length: 4060 mm Machine width: 2450 mm Machine weight: 8800 kg Equipment: Air conditioning in the electric cabinet Spindle temperature Oil mist extraction Workpiece Probe

Serial Number: 141643 Control: MAZAK MAZATROL M PLUS Table dimensions: 1460 x 510 mm Tool holder: SK 40 X-axis travel: 1120 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Max. distance from spindle end face to clamping surface: 690 mm Spindle speed: 40 - 7000 rpm Max. permissible weight on machine table: 500 kg Rapid traverse in X and Y axis: 24 m/min Rapid traverse in Z-axis: 20 m/min Cutting feed speed X/Y/Z: 1 - 5000 mm/min Number of tool locations: 24 Max. tool diameter: 80 mm with occupied neighboring space max. tool diameter with free adjacent space: up to max. 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg incl. chip conveyor MAYFRAN incl. the tool holders located on the tool changer Attention: the machine vice clamped on the table is not included in the scope of delivery! Internal reference: previously lot 14 Auction-ID: A7-49056-264

Manufacturer: HAAS Model: VF 4SS Year: 2017 Condition: Used Stock number: 9443 Control system: HAAS Work table length: 1321 mm Work table width: 495 mm Spindle drive power: 22.4 kW Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Machine weight: 6087 kg Equipment: 2x double 5th axle

Machine is dismantled and stored (see photos). May show traces of storage Auction-ID: A7-49688-2

Manufacturer: HAAS Model: VF 2SS Year: 2014 Condition: Used Stock number: 9442 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

CNC Control: Siemens 828D ShopMillCourses X/Y/Z: 1220 / 600 / 610 mmTotal power: 10 / 14 kWSpindle speed: 8,000 rpmSpindle taper: SK40Tool magazine: 20 positionsEquipment: Chip conveyor, coolant, technical documentationPower supply: 400 V – 50 HzManufacturer: HuronYear: 2012Serial number: M02741Estimated dimensions (mm): 3500 x 2800 x 3200Weight (kg): 10000 Auction-ID: A1-49171-10

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2013 Condition: Used Stock number: 9441 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 2x double 4th axle

Technical data Manufacturer: HURCO Model: VMX42i Date of manufacture: 2018/3/6 Spindle speed: 12,000 rpm Machine mass according to nameplate: 6,450 kg Travel X/Y/Z: 1,067 / 610 / 610 mm (Source: Online research) Table size: 1,270 x 610 mm (Source: Online research) Max. table load: 1,750 kg (Source: Online research) Spindle power: 18 kW (Source: online research) Tool holder: ISO 40 (Source: Online Research) Tool changer: 30 places (Source: Online Research) Control: HURCO MAX5 / WinMax with double screen (Source: Online research) Configuration 3-axis CNC vertical machining center with 2 machine vices, chip conveyor and separate cooling/tempering unit. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Note information researched to the best of my knowledge and belief. No guarantee is given for completeness and  ...

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2012 Condition: Used Stock number: 9440 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

machine ready for transport and to be assessed on viewing day Not included tooling Auction-ID: A1-48648-133

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

Machine is dismantled and stored (see photos). May show traces of storage. Auction-ID: A7-49688-1

The machine is in good technical condition; it can be tested by prior arrangement.

With double pallet, HEIDENHAIN control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-49592-15

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS HE Year: 2007 Condition: Used Stock number: 9426 Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Tool magazine: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Cone: ISO 40 Equipment: Pallet system

Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle holder taper: ISO 40Z-axis travel: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 m Max. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-49056-157

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2010 Condition: Used Stock number: 9425 Operating hours: 1049 h Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Cone: ISO 40 Number of all tools: 24 pieces Equipment: 4. Axis

Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-49302-1008

Key data: 711 mm, 406 mm, 394 mm

Manufacturer: HAAS Model No.: DM 2 Year: 2019 Condition: Used Stock number: 9424 Operating hours: 3700 h Work table length: 864 mm Work table width: 381 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 711 mm Y-axis travel: 406 mm Z-axis travel: 394 mm Cone: ISO 40 Number of all tools: 18+1 pieces Rapid traverse X/Y/Z: 61 m/min Machine weight: 2427 kg

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-49302-3000

Key data: 2134 mm, 1016 mm, 762 mm

Manufacturer: HAAS Model: VF 9 Year: 2008 Condition: Used Stock number: 9399 Control system: HAAS Work table length: 2134 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 2134 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 12837 kg 2025: Spindle replacement

Machine is dismantled and stored (see photos). May show traces of storage Auction-ID: A7-49688-4

Key data: 1016 mm, 610 mm, 1032 mm

Manufacturer: TRENS Model: MC 100 VA Year: 2002 Condition: Used Stock number: 9396 Control system: Heindenhein 426 Switch-on hours: 108857 h Hours: 41979 h Work table length: 1080 mm Work table width: 580 mm Maximum table load (even): 1000 kg Maximum spindle speed: 8000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Travel Z axis: 1032 mm Workpiece spindle drive power: 11 kW Machine height: 2950 mm Machine length: 3280 mm Machine width: 2260 mm Machine weight: 6200 kg

Condition:good Table clamping surface 800x500 mm X-axis travel 630 mm Y-axis travel 500 mm Z-axis travel 500 mm Spindle speed 10 - 10000 /min. Number of controlled axes 3 Central cooling no Spindle clamping taper SK 40. Max. table load 500 kg 29Heb8Zqm Total power consumption 33 kVA Sinumerik control system. sn: 28850021282 Auction-ID: A7-49260-3

Key data: 600 mm, 500 mm, 450 mm

Manufacturer: Mikron Model UME 600 TNC 360/4xx Year 1996 Condition Used Stock number 9378 Maximum vertical spindle speed: 5000 1/min X-axis travel: 600 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Machine height: 2000 mm Machine length: 2200 mm Machine width: 2800 mm Machine weight: 3550 kg

Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of Make: 2000 Condition: Use, Energized, Control on Windows 7 NEW x-travel 600 mm y-travel 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm Tool changing device 18-fold Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röder's Job Manager (for processing several workpieces one after the other) Probing programs for almost all common geometries Extor Extraction System for Dusty Machining Minimal lubrication Bedtrack blower Blum measuring laser (for tool measurement length + diameter + contour and fracture control) Tool cleaning (air) Cooling unit for spindle and control cabinets Documentation Without accessories such as tools or vises Auction-ID: A7-4 ...

Key data: 1270 mm, 610 mm, 720 mm

Manufacturer: MAS Model MCV 1270 POWER Year 2018 Condition Used Stock number 9375 Control system: HEIDENHAIN TNC 640 Switch-on hours: 20815 h Hours: 7638 h Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Number of all tools: 40 pieces Machine height: 3330 mm Machine length: 5000 mm Machine width: 4165 mm Machine weight: 12200 kg

DECKEL MAHO - DMU 125 T Stock number 1039-8230 Machining Center - Vertical Control TNC 430 Heidenhain Country of origin Germany Additional information: Machine is delivered with new discs. Technical details: x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Control TNC 430 Heidenhain Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 15 / 10 kW Max. torque 500 Nm Tool holder SK 40 Work table: Table clamping area 1,500 x 1,050 mm Max. table load 2,500 kg Number of T-slots 10 T-slots - width 18 H7 mm T-slots - spacing 100 mm Tool Changer: Number of tool positions 60 pos. max. tool diameter 80 mm max. tool diameter. with free neighboring box. 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg Feeds: Rapid traverse ( X / Y / Z ) 15 m/min Feed speed 10,000 mm/min Total power requirement 29 kW Space requirements appr ...

The machine is in good technical condition; testing is possible by prior arrangement. It includes equipment and, where applicable, accessories (holders, tools, etc.). Complete, verifiable service history.

Machine already ready for transport, to be assessed on viewing day. Needed for transport 7.5 mtr Auction-ID: A1-48648-2

The machine is in good technical condition; it can be tested by prior arrangement.

incl. additional indexing table 4/5 axis machining Not included clamps and chuck Auction-ID: A1-48648-128

Key data: 450 mm, 400 mm, 400 mm

Manufacturer: Strojtos Lipník Model: VMC 40 Year: 2005 Condition: Used Stock number: 9372 Control system: HEIDENHAIN Maximum vertical spindle speed: 9000 1/min X-axis travel: 450 mm Y-axis travel: 400 mm Travel Z axis: 400 mm Machine weight: 3900 kg

Internal coolant system, coolant tank, chip conveyor, ATC 24 positions Auction-ID: A1-48648-33

Manufacturer DMG Model DMC 100U duoBlock® Year 2007 CNC control HEIDENHAIN iTNC 530 Routes and advances Strokes (X/Y/Z) 1,000/1,000/1,000 mm. Fast forward axes (X/Y/Z) 60,000 mm./min. Max. working advance axes (X/Y/Z) 10,000 mm./min. NC rotary table Pallet changer for 2 pallets INCLUDED 2 Pallets INCLUDED Quick change system INCLUDED Pallet dimensions 1,000x800mm Maximum weight on pallet changer 1500 kg Table rotation (C-axis) 0.001º (Continuous) Table rotation speed 10.3 r.p.m. Head Horizontal Automatic Swivel Head / Vertical (A-axis) 0.001º (continuous) Head Cone HSK 63 Main Motor Power 26.9 kW Engine revolutions 24,000 rpm Automatic Tool Loader Type Loader Tools Horizontal Chain Tool warehouse positions. 120 Additional equipment Internal Cooling 80 Bar INCLUDED Compact cooling system INCLUDED Coolant tank with paper filer INCLUDED Chip Evacuator IN ...

machine already ready for transport and assessment on viewing day, chuck and products on table not included Auction-ID: A1-48648-3