We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (21)
- Automatic Drillers (3)
- Automatic thread drills (3)
- Battery powered drilling machines (8)
- Bench Type Drilling Machines (56)
- Boring Mills (44)
- Centre Drilling Machines (3)
- CNC Boring Mills (31)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (149)
- Contracting Pods Panel Drills (12)
- Core-drilling machines (3)
- Deep Hole Drilling Machines (56)
- Drilling And Milling Machines (21)
- Drilling Centres (2)
- Drilling Machines (50)
- Gang Drilling Machines (5)
- High Performance Drilling Machines (8)
- High Speed Drilling Centres (HSC) (2)
- High Speed Machining Centres (HSC) (9)
- High Speed Radial Borers (17)
- Horizontal Boring And Milling Centres For Cubical Workpieces (5)
- Horizontal Numerically Controlled Machining Centres (51)
- Horizontal Processing Centers (33)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (3)
- Jig boring machines (16)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (9)
- Metal processing centers (1)
- Milling machine centers (17)
- Milling machining centres (3)
- Multi Spindle Bar Maschines (1)
- Multi Spindle Drilling Machines (31)
- Multiway Drilling And Boring Machines (6)
- Numerically Controlled Machining Centres (280)
- Other Drilling And Boring Machines (1)
- Other Machining Centres (15)
- Panel Drills (17)
- Pillar-Type Drilling Machines (27)
- Portal machining centres (5)
- Processing Centers (244)
- Profile processing centres (1)
- Radial Drilling Machines (86)
- Round Turntables (7)
- Special drilling machines (48)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (2)
- Table Drills (55)
- Tapping Machines (25)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (9)
- Universal processing centres (66)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (110)
- Vertical Processing Centers (233)
- Vices For Machines (4)
- more
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABENE (1)
- ABM (8)
- ACCUWAY (1)
- Aciera (3)
- ADAM (1)
- AEG (3)
- AERRE (1)
- AES (1)
- AES GROUP (1)
- AGEMA (1)
- AGIE (1)
- AGIE CHARMILLES (5)
- AGW BOCKLENBERG (1)
- Akira Seiki (2)
- ALBERTI (1)
- ALBRECHT (1)
- ALKETT (1)
- ALLOY WHEEL M... (1)
- Alzmetall (71)
- AMADA (1)
- ANAYAK (3)
- ANGER (5)
- APRA NET (1)
- ARBOGA (8)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- Artykuly Techniczne (6)
- ASDORF (1)
- AUDAX (1)
- AUERBACH (1)
- AVIA (1)
- AWEA (6)
- AXA (19)
- AXON LITZ (1)
- BACCI (1)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECK (1)
- BECKHOFF (1)
- BERGMANN (1)
- Bergonzi (2)
- Bernardo (16)
- BERNHARD STEINEL (1)
- BERNSTAIN (1)
- BEYER (2)
- BFW (3)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIESSE (1)
- Bilz (3)
- Bimak (2)
- Bimatec Soraluce (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (6)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (3)
- BORNEMANN (1)
- Borsig (2)
- BOSTOMATIC (1)
- BREDA (1)
- BREDA / GI-EFFE-DI (1)
- BRIDGEPORT (11)
- BRIDGEPORT - HARD... (1)
- BRIDGEPORT HARDINGE (1)
- BROTHER (10)
- BUCKUHLY (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER BW (1)
- BüHRER (1)
- C.B.FERRARI (1)
- Caber (2)
- Castel (3)
- CB FERRARI (1)
- CERUTI (1)
- CHARMILLES (3)
- CHEMNITZER MASCHINENBAU (1)
- CHEMNITZER MB (1)
- Chiron (53)
- CINCINATI MILACRON (1)
- CINCINNATI (9)
- CINCINNATI MILACRON (2)
- CMA (6)
- CME (1)
- CNC-STEP (7)
- COBALM (1)
- COILTEC (1)
- COLGAR (3)
- Collet (4)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 101)
ABA 2
ABB 1
ABENE 1
ABM 8
ACCUWAY 1
Aciera 3
ADAM 1
AEG 3
AERRE 1
AES 1
AGEMA 1
AGIE 1
ALBERTI 1
ALBRECHT 1
ALKETT 1
Alzmetall 71
AMADA 1
ANAYAK 3
ANGER 5
APRA NET 1
ARBOGA 8
ASDORF 1
AUDAX 1
AUERBACH 1
AVIA 1
AWEA 6
AXA 19
BACCI 1
BATLIBOI 1
BECK 1
BECKHOFF 1
BERGMANN 1
Bergonzi 2
Bernardo 16
BEYER 2
BFW 3
Bierrebi 3
BIESSE 1
Bilz 3
Bimak 2
BIZERBA 1
BLANSKO 1
BMW 2
Borsig 2
BREDA 1
BRIDGEPORT 11
BROTHER 10
BUCKUHLY 1
BUMOTEC 1
BüHRER 1
Caber 2
Castel 3
CERUTI 1
Chiron 53
CMA 6
CME 1
CNC-STEP 7
COBALM 1
COILTEC 1
COLGAR 3
Collet 4
CONDAIR 1
CORDIA 6
CORNAC 1
Csepel 3
CYBERNET 1
DAEWOO 1
DAHLIH 1
DART 1
DECKEL 10
DECKEL MAHO 84
Deckel-MAHO 17
DEFUM 5
DEGEN 1
Depo 2
DEUMA 1
DIHART 1
DIVERS 1
diverse 3
DIXI 1
DKF 1
DMC 3
DMG 47
DMG MORI 57
DMG-Mori 10
DMU 1
Donau 16
DOOSAN 20
DORMER 1
DUGARD 1
DUMETA 6
EBERLEI 1
Einhell 2
Elan 2
ELHA 5
ELMAG 6
ELU 1
elumatec 10
EMA 1
EMAG 1
EMCO 6
EMMEGI 2
ENSHU 3
ERD 2
Erlo 16
EUMACH 1
EWAG 2
FADAL 6
FAMU 1
Famup 5
FANUC 10
FEELER 2
FEHLMANN 12
FEIN 1
FELLER 1
FERVI 1
FIDIA 3
FIRST 2
FLOTT 47
FORMAT 2
FPT 4
FRORIEP 5
FSA 1
FUJITSU 1
GARANT 1
GEORG 1
GERARDI 1
GIANA 1
GILLARDON 21
GIRARDS 1
GOSMETA 1
GOTHA 1
GROB 1
GSP 1
Gühring 3
GüNTHER 1
HAAS 34
HACO 1
HAEFNER 1
Hardinge 2
HARTFORD 10
Hauser 3
HBM 16
HECKERT 6
HEDELIUS 25
HEGNER 1
HELLER 17
Hermle 27
HETTNER 1
HIMMEL 2
HKS 2
HOLZMANN 2
HTT 1
HURCO 39
HURON 6
HUVEMA 5
HWACHEON 7
HYUNDAI 3
IBARMIA 8
IMATEC 1
IMF 4
IMSA 2
INDEX 1
INNSE 1
approved
dealer
dealer
x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...
approved
dealer
dealer
bore capacity in steel (diameter): 28 mmthroat: 200 mmbore stroke: 105 mmtable surface area: 360x340 mmDistance spindle/table max.: 540 mmturning speed range - stepless: 120-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...
approved
dealer
dealer
x-travel: 1800 mmy-travel: 520 mmz-travel: 520 mmcontrol: iTNC 426-M spindle speed:: 8000 UpMrapid travel x/y/z: 30 m/mintool taper: SK 40 table load: 3 ttool piece magazine with: 30 Plätze spindle drive: 22 kWmax. torque on the spindle: 220 Nmweight of the machine ca.: tdimensions of the machine ca.: mMachine still in the delivery factory: Electric 400 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode ...
approved
dealer
dealer
x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871work table:: table surface area: 1.200 x 560 mmmax. table load: 1.000 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange time: 1,6 secchange-time chip to chip: 7,0 secfeeds:: feed speeds: 20.000 mm/minrapid traverse: 30 m/minFeed force: 5 kNtotal power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,0 x 3,0 x 2,8 mChip conveyor: Automatic Tool Changer: 30 pos. Coolantsystem: DXF import function: elektr. hand wheel: Operation mode 4: direct travel-measuring-system: XYZ Coolant-Air-Blast- ...
approved
dealer
dealer
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): mmarm length: mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -
approved
dealer
dealer
x-travel: 600 mmy-travel: 450 mmz-travel: 300 mmCNC-control: Roeders RMS6 table-size: 700 x 550 mmmax. table load: 800 kgspindle taper ISO: spindle turning speed range: 42.000 U/minfeed stepless: 0 - 30.000 mm/minrapid traverse: 30 m/mindrive capacity - spindle motor: 14 kWtool change unit: Pick-up 18 Pos.voltage: 400 Vtotal power requirement: 20 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,00 x 2,30 x 2,70 m- Serial No.: 88231-83- HSC spindle Fischer MFW1230/42- Dust extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - / Contact us at -
approved
dealer
dealer
Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
bore capacity in steel (diameter): 40 mmthroat: 380 mmbore stroke: 160 mm: 4 speeds: 60 - 1250 U/mintable-size: - mmtotal power requirement: 3,3 kWweight: 900 kgdimensions: - mmFeatures:-Gear drilling machine with a robust design-Column-mounted drilling table-Right/left rotation-Feed-Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 760 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 6700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
drilling diameter: 18 mindrilling capacity diameter max.: 15 mmbore depth: 90 mmthroat: 215 mmspindle: bis 360 mmspindle: 560 mmtable plate: 350 x 290 mmcolumn diameter: 75 mmTotal height: max. 1050 mmweight: ca. 100 kgspindle turning speed - stepless: 100 - 1800 U/minmotor speeds:: 700 / 1400 U/minPole-changing motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
throat: 180 mmquill stroke: 80 mmcontinious capacity: 20 spindle taper: MK 2 table-size: 280 x 245 mmheight of the machine: ca. 1000 mcolumn diameter: 73 mmdistance spindle /table: max. 425 mmdimensions: ca. 615 x 330 x 1015 mmweight: ca. 60 kgincl. vice HM Müller HT100PThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...
2001 Hurco VMX40 Technical data: - Ultimax 4 control - network card - DXF software - Tool changer 24 places - SK40 holder - Spindle speed 10-10,000 rpm - Chip conveyor - Operating hours 5279 Travels: - X-axis 1,020mm - Y-axis 510mm - Z-axis 610mm Find more here - / Contact us at -
