boring mills and machining centers used for sale (3,202)

Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cl ...

Key data: 1020 mm, 510 mm, 560 mm

For sale; Etasis Etamill VL-1000 machining center in very good condition. Equipped with cooling by the spindle, The latest Fanuc control 0i Plus with Manual Guide i, chip conveyor, Renishaw TS27R, etc.

X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation.

Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible.

Gear drill without belt change Very quiet and quiet running - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - 9 drilling spindle speeds 90 - 1450 rpm - Projection 300 mm - Table with 2 T-slots - Table dimensions swivel 500 x 450 mm - Table dimensions base plate 350 x 400 mm - Distance from base plate to spindle nose 1100 mm - Max. distance table - drilling spindle 660 mm - Height adjustable via rack with hand crank - Column diameter 120 mm - Drive 380 V / 1.2 kW - Space requirement approx. W 600 x H 2100 x D 670 mm - Weight approx. 350 kg - With drill chuck

Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement.

T-slot system: 18 H8, working spindle: SK40, length: 5000mm, width: 3240mm, height: 3800mm, basic machine weight: 1,5t, machine-on operating hours: 31.546h, control-on operating hours: 56.903h, program run time: 10.521h, with documentation. An on-site inspection is possible.

5 Axis CNC Turning and Milling Center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of Make: 2019 Internal machine no. 71 Travels: X-axis: 925 mm Y-axis: 520 mm Z-axis: 2,215 mm Center width: 2,000 mm Turning Ø over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-fold tool changer Programmable tailstock with hydraulic quill Facilities - Hinged belt chip conveyor Interlit ISF - Full-clamping cylinder - 6-Jaw Power Chuck SMW Ø 500 IEP - - Hand Dishwashing Gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input fineness 0.1μm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In process measuring with Renishaw probe for X/Z-C axis - Automatic zero point displacement in the z-axis main spindle - High-precision C-axis - Rotation func ...

x-travel: 1270 mmy-travel: 508 mmz-travel: 635 mmcontrol: Haas table surface area: 1320 x 457 mmrapid traverse: 20 m/mintable load: 800 kgturning speed range: 7500 1/minpower capacity - milling spindle: 11 kWno. of tools in the magazine: 20 Stücktool taper: SK 40 weight of the machine ca.: 6,2 tdimensions: 3,8 x 2,8 x 2,8 mVertical machining centerCSM 2 A control systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Foot switch, safety foot switch, foot pedal -Foot switch: Safety foot switch -Metal housing: with protective cover, die-cast aluminum -Quantity: 1x foot pedal available -Dimensions: 280/160/H130 mm -Weight: 1.4 kg

bore capacity in steel (diameter): 4 / 6 mmturning speeds: 650 - 12.000 U/mintable surface area: 180 160 mmspindle cone: B 10 bore stroke: 50 mmtotal power requirement: ? kWweight of the machine ca.: 50 kgdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity boring approx. 90 mm - Thread cutting up to approx. M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1380 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1750 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Dice table - various mounts + drill - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

bore capacity in steel (diameter): 32 mmarm length: ca. 920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siegmund System Perforated Grid Table incl. Silverline Profile Processing Station For sale is an extremely robust, combined industrial workstation for metal processing, fixture construction or precise profile production. The system is made up of absolute premium components: 1. Siegmund System Perforated Grid Table (Base) - High-precision, extremely low-distortion and solid welding and clamping table from the world market leader Siegmund. - The perforated grid system (including perforations on the sidewalls) enables flexible and repeatable relocation of stops, clamping bolts and angles. Silverline Clamping & Machining System (Setup) - Solid superstructure with precise linear guides for longitudinal displacement. - Two parallel yellow motor heads (milling/drilling units) for simultaneous or staggered machining steps. - Three heavy, horizontal vises fix workpieces again ...

A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible.

3-axis machining centre for aluminium or PVC profiles for top machining Max. travel X-axis: 2,450 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with 2 USB ports Speed up to 18,000 rpm per min. Minimum quantity spraying device 4 pneumatic material tensioners Light barrier

SW BA 222iYear of manuf. : 2022 Control : Siemens 840 Dsl Movement X/Y/Z : 200/350/300 mmTool holder : HSK 40 ____________Description:In General:Year of manufacture:2022Control system:Siemens 840 DslTravel ranges X/Y/Z:200/350/300 mmSpeed:25,000 rpmTool holder:HSK 40Spindle:Technology:2 motorised spindlesSpindle centre distance:200 mmSpeed:25,000 rpmTool holder:HSK 40Double-swivel mount:Technology:A-axis or U-axis with counter-bearingDrive:Direct drive (torque motors)Loading module:Technology:Industrial robotsManufacturer:FanucModel:LR Mate 200iDGripper:Double gripperWorkpiece marking:Needle embossing station (DMC)Workpiece feed:Technology:L-shaped infeed and outfeed conveyorWorkpiece carriers:20Dimensions:190 x 150 x 15Workpiece capacity:20Dimensions:220 x 160 x 240 mmEquipment:Tool magazine:40 positions (2 × 20)Position measurement systems:Direct on all axesChip removal:Chip con ...

ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg

ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg

Control Heidenhain TNC 426 Travel X/Y/Z: 1250 x 880 x 800 mm Speed 8,000 rpm Tool magazine for 60 Wkzg. SK 50 Universal milling head +0° / - 90° Index NC rotary table 1250 x 1000 mm Chip conveyor Measuring Sensors

1. Danube CNC Drilling Machine 2. Mazak CNC lathe with accessories 3. Conventional moving column boring mill Fabr. WOTAN , without the plate fields shown in the pictures Spindle Ø 150 Holder SK50 X = 12,000 mm Y = 2,000 mm Z = 900 mm

A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible.

Control unit, control panel, operating panel, control unit, foot switch, safety foot switch, step switch -Manufacturer: Steute, single-pedal safety foot switch -Type: GFS 1SD1Övd -Item No.: 81.2.25.001 -Metal housing: with protective cover, die-cast aluminum -Dimensions: 300/160/H135 mm -Weight: 1.2 kg

Perforex MT 2101 S Milling Terminal with Accessories and Tools Assembly Aid for Tool, Performance Package MT2101, BC1007 Zero point Perforex pluggable and swivel RiPanel Processing Center, Software Machine is in mint condition, year 2024 Work performance in the pictures

Offer 22681 Technical data: - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - 9 drilling spindle speeds 90 - 1450 rpm - Projection 300 mm - Table with 2 T-slots - Table dimensions 400 x 450 mm - Max. distance table - drilling spindle 660 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.2 kW - Space requirement approx. W 600 x H 2100 x D 850 mm - Weight approx. 300 kg - with: - Drill chuck - 10 pcs. HSS – Drill Bit 8 – 20 mm

Key data: 800 mm, 700 mm, 600 mm

Basic machine data Used 5-axis machining center from DMG Make: DMG Type: DMC 80 U hi-dyn Year of Make: 2004 Condition: very good Control: Name: Heidenhain MillPlus Travels: x-travel: 800 mm // y-travel: 700 mm // z-travel: 600 mm Technical data: • 2-fold pallet changer • Pallet size: 800 mm x 630 mm • 60-speed tool changer • Spindle 18,000 rpm • Tool holder SK 40 • Infrarottprobe • Rinsing gun • IKZ (internal coolant supply) • 600 litre tank with paper belt filter The machine is in very good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

spindle diameter: 150 mmx-travel: 16000 mmy-travel: 3000 mmtaper ISO: 50 w-axis: 1200 mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mAdditional Specifications:Ram (mm) 380 x 380Ram Travel (mm) 500Including:Vertical Head ISO 504-Axis D.R.O.Metallic Way CoversPendant ControlThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...

x-travel: 630 mmy-travel: 630 mmz-travel: 700 mmControl: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mmTable load: 400 kgnumber of spindle speeds: 300 - 20.000 min-1 spindle taper: HSK-A63 coolant: durch Spindel drive motor: Ac 45/30KW kWRapid travel: Z=60 m/minrapid traverse: X,Z = 120 m/minfeed: Schnittvorschub =0,1-60 m/minrapid traverse: B=120 m/mintotal power requirement: 30 kWweight of the machine ca.: 15 tdimensions of the machine ca.: mFEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right  ...

control: Siemens Sinumerik 840D table load: 0,7 twork piece spindle speed: 200 - 2300 U/mintotal power requirement: 12 kWweight of the machine ca.: tdimensions of the machine ca.: mATC, 10 positionsChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50-600 mmbore depth: 6000 mmtable load: 6 tturning speeds: 50-600 U/minclamping diameter max.: 650 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBoring (pushing) from ID = 50 to 320Skyving and roller Burnishing from ID = 50 to 300Honing from ID = 50 to 320Extraction systemThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus  ...