boring mills and machining centers used for sale (3,202)

spindle diameter: 125 mmx-travel: 3000 mmy-travel: 1500 mmcontrol: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mmTable dimensions: 1200 x 1500 mmtable load: 5 tspindle turning speed range: 12 - 2300 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAutomatic tool Changer (40 positions)Chip ConveyorCoolant AttachmentSpindle SupportThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointmen ...

Axis: 3 serial number: 84095 tool taper: BT40 toll turrets: 12 table surface area: 1300 x 400 mmno. of flutes: 3 T-Nuten T-slot - width: 18 mmcontrol: FANUC dimensions: ca. 3000 x 2500 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm, 80 1/min

Column Drill Alzmetall AB 3 / ESV Drive type: AZ continuously variable transmission with two-stage manual transmission Speed range (Gear Stage I): 80-240 rpm or 160-480 rpm Speed range (Gear Stage II): 240–700 rpm or 480–1,400 rpm Automatic feed: 3 stages (0.1 – 0.2 – 0.3 mm/rev) Motor power 1.5 KW - 380 Volt Tool holder: Short spindle MK 3 Spindle stroke (drilling stroke): 160 mm Projection: 285 mm Table clamping surface: 500 x 370 mm Column diameter: 130 mm Machine weight approx. 400 kg Drilling capacity in steel (St 60): 28 mm Drilling capacity in cast iron (GG 20): 35 mm Drilling capacity in steel (St 60): 40 mm Tapping in steel (St 60): Up to max. M 22 Threading in cast iron (GG 20): Up to max. M 33 Retrofitted foot switch and control cabinet Mechanical-hydraulic machine vice Röhm RB 4 (Jaw width 160 mm - clamping range up to 310 mm) Retrofitted f ...

Key data: 600 mm, 650 mm, 500 mm

Basic machine data Used 5-axis machining center from DMG Make: DMG Type: DMU 60 eVo Year of Make: 2014 Condition: very good Control: Name: Heidenhain iTNC 530 HSCI Travels: x-travel: 600 mm // y-travel: 650 mm // z-travel: 500 mm Technical data: • Spidnel: 20-14000 rpm • HSK-A63 interface • 60-fold tool changer • Swivel rotary table • Table: 600 mm x 500 mm • Max. table load: 400 kg • Infrarottaster Heidenhain • IKZ (internal coolant supply) 40 bar • 600 litre coolant tank with paper belt filter • Blowing air through spindle center • Chip conveyor • BA 4 (extended man. Procedure) • Oil mist extraction The machine is in very good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of Make: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Tapping (steel/casting): M25 / M38 Projection (column to spindle centre): 330 – 1,230 mm Headstock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 levels (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Boom height adjustment: 620 mm

Travel X/Y/Z: 560mm/410mm/460mm, Tool positions: 30, Tool interface: CAT40/BT40, Spindle speed: 8000rpm, Spindle power: 10HP, Spindle diameter: 70mm, Rapid traverse: 30m/min, Table dimensions X/Y: 605mm/380mm, Max. table load: 250kg, Number of pallets: 2. Machine dimensions X/Y: approx. 3050mm/2900mm, Weight: approx. 5000kg, Control: Fanuc. Documentation available. An on-site inspection is possible.

Year of construction: 2015 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct m ...

Csepel RF50/1250 Radial Drilling Machine Robust and proven radial drilling machine of the quality manufacturer "Csepel" model RF50/1250. The machine is characterized by its solid construction and is ideal for locksmiths, workshops or demanding do-it-yourselfers. Technical data (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50/1250 Type of current: 3~ (three-phase current / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse: 16 A slow blow More items - new and used - can be found in our shop! International shipping costs on request!

Alzmetall AC 32 Turret Double Head In-Line Drilling Machine Extremely robust and rare double-head in-line drilling machine based on two Alzmetall AC 32 drill tops. This system is a high-quality industrial design designed for highly efficient series or step machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g. centering, drilling, countersinking, threading) without the need to manually retool tools. Technical data & equipment (per capita / total system): Manufacturer of drill tops: Alzmetall (Germany) Model: AC 32 (electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x swivelling turret heads with several stations Machine table: Solid, ground cast iron table with T-slots for flexible constru ...

Foot switch, safety foot switch, foot pedal -Foot switch: Safety foot switch -Metal housing: with protective cover, die-cast aluminum -Number: 2x foot pedals available -Price: per piece -Dimensions: 270/140/H145 mm -Weight: 1.4 kg

A Deckel Maho CNC vertical machining center is available. Travel X/Y/Z: 1000mm/600mm/600mm, table dimensions X/Y: 1200mm/600mm, max. table load: 800kg, spindle speed: 8000rpm, power: 13kW/9kW, torque: 57Nm/83Nm, feed rate: 30m/min, rapid traverse: 30m/min, tool stations: 24, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3200mm/2600mm/2700mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

x-travel: 650 mmy-travel: 650 mmz-travel: 650 mmControl: Siemens 840 D total power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mmy-travel: 1000 mmz-travel: 1200 mmControl: Siemens 840 C total power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mmy-travel: 1000 mmz-travel: 1200 mmControl: Siemens 840 C total power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mmy-travel: 1600 mmz-travel: 1400 mmControl: Siemens 840 C total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible.

CNC Machining Center Matec 40 HV Control: Heidenhain iTNC 530 Year of Make: 2008 Internal machine no. 70 Travels: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm Horizontal Z-axis: 990 mm vertical NC swivel head infinitely variable: +/- 105 degrees Tool magazine: 40-fold Tool holder: SK50 Motor spindle: 8,000 rpm / 68kW Accessories: - Chip conveyors - Partition wall prepared - Electronic handwheel - Internal coolant supply 20 bar (paper belt filter 450 l) - Full work area cladding with roof - Rinsing gun - Oil-central lubrication - Oil mist extraction system - 3D probe with radio (Renishaw RMP60)

A Toyoda CNC horizontal machining center is available. X/Y/Z travel: 750mm/800mm/850mm, table dimensions X/Y: 550mm/550mm, spindle speed: 15000rpm, tool interface: SK40, tool magazine capacity: 60, weight: approx. 16000kg, power-on hours: 133870h, operating hours: 25394h, feed hours: 12802h. Including chip conveyor, 4th and 5th axis, and Knoll KF 400/2250. Documentation available. An on-site inspection is possible.

A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible.

A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible.

A vertical CNC machining center DMG is offered. Travel X/Y/Z: 635mm/510mm/460mm, spindle-to-table distance: 120mm-580mm, table size X/Y: 790mm/560mm, table height: 720mm, max. table load: 600kg, feed rate X/Y/Z: 20m/min, rapid traverse X/Y/Z: 25m/min, max. feed force: 5kN, max. spindle speed: 8000rpm, max. spindle power: 18.9kW, max. torque: 100Nm, tool holder: SK40, tool magazine: 20 positions, max. tool diameter: 80mm, max. tool length: 250mm, max. tool weight: 6kg, tool change time: 1.6s, control: Heidenhain iTNC 530, total power-on hours: approx. 25232h, spindle running hours: approx. 8801h. Inspection possible by appointment.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: Adapter sleeves, reducing sleeve MK6/MK5 -Type: MK6-MK5 -Dimensions/Quantity: see photos -Transport dimensions: 620/250/H63 mm -Weight: 29.8 kg

x-travel: 1350 mmy-travel: 560 mmz-travel: 510 mmControl: Heidenhain iTNC 530 total power requirement: 13 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Brother C-00 Travel X/Y/Z: 650 x 400 x 435 mm 2-fold pallet changer 800 x 400 mm Spindle speed: 16,000 min-1 Tool magazine for 40 Wkz., BT 30 IKZ 70 bar 3D probe OMP 40 Electronic handwheel Chip conveyor

X-axis: 880 mm, Y-axis: 630 mm, Z-axis: 630 mm, table dimensions: 1250 × 700 mm, table load capacity: approx. 500 kg, B-axis (milling head): manually or NC swiveling up to 103°, maximum spindle speed: 12,000 rpm, power: 15 kW, torque: 130 Nm, tool holder: SK 40, tool magazine capacity: 32 positions, control system: Heidenhain TNC 430 MillPlus, length: 4073 mm, width: 3323 mm, height: 2375 mm, weight: approx. 9.5 t. An on-site inspection is possible.

Offered is a Hurco CNC vertical machining center including spare parts. Travel X/Y/Z: 1270mm/660mm/610mm, table dimensions X/Y: 1500mm/660mm, max. table load: approx. 1360kg, spindle speed: 10000rpm, spindle taper: SK40, main drive power: approx. 18.5kW, tool pockets: 24, feed X/Y: 30m/min, feed Z: 20m/min, rapid traverse X/Y: 30m/min, rapid traverse Z: 20m/min, spindle operating hours counter: approx. 7676h, control: Hurco Ultimax. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, machine weight: approx. 9000kg. Inspection possible by arrangement.

Control Siemens Sinumerik 828D Travel X/Y/Z: 1020 x 560 x 510 mm Spindle speed 8000 min-1 Tool magazine for 24 Wkzg. SK 40 IKZ Chip conveyor

A repair-required Matsuura CNC horizontal machining center is offered. Travel X/Y/Z: 660mm/660mm/660mm, feed rate X/Y/Z: 60m/min, rapid traverse X/Y/Z: 60m/min, number of pallets: 2/6/12/24/36, pallet size X/Y: 500mm/500mm, max. pallet load: 400kg, max. workpiece diameter: 700mm, max. workpiece height: 850mm, max. spindle speed: 12000rpm, spindle power: 15/22kW, max. torque: 187.3Nm at 1120rpm, tool interface: SK40/BT40/HSK63, tool magazine: 60-530 tools, max. tool diameter: 80mm/150mm, max. tool length: 350mm, max. tool weight: 10kg, tool change time: 0.9s, control: Fanuc Matsuura G-Tech 31iB. The machine is integrated into an automation line. The loading-side door is missing. Broken auger for transverse chip transport from the machine bed to the main chip conveyor. The machine is available from calendar week 37. Inspection by appointment is possible. Established machine-tool terminolog ...

A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement.

A CNC vertical machining center Quick Jet is offered. Travel X/Y/Z: approx. 1200mm/800mm/700mm, spindle taper: HSK-A80, max. spindle speed: 14000rpm, spindle power: 25kW, spindle torque: 170Nm, tool magazine: 16, max. tool length: approx. 300mm, max. tool diameter: 100mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 24m/min, distance between table surface and spindle nose: 100mm-800mm, table size X/Y: 1350mm/1300mm, max. workpiece weight: 8000kg, control: Heidenhain TNC 530. Including HSK-A80 tool holder inventory. Machine dimensions X/Y/Z: approx. 3335mm/2780mm/3595mm, weight: approx. 11050kg. Inspection possible by appointment.