boring mills and machining centers used for sale (3,234)

Key data: 900 mm, 850 mm, 700 mm

5 Axis Machining Center Manufacturer: Hedelius Type Acura 85 Control Heidenhain iTNC640 Year of construction 2022 Clamping area 850 x 750 Max. table load 1000kg Travel X/Y/Z 900/850/700 max speed 18,000rpm Tool holder HSK63 80 Compartment Tool Changer IKZ 70bar Chip conveyor Electronic handwheel Hydraulic zero point clamping system pssend also a magnetic plate 600 x 800mm adapted to the NP clamping system. Hydraulic Vise Schunk 2 x Schunk center clamps 60 HSK 63 Recordings Machine comes from a company liquidation and is in perfect TOP condition. All information without guarantee

1 gebr. DMG DMU 50 M machining centre, built in 2001 X-axis travel: approx. 500 mm Y-axis travel: approx. 400 mm Z-axis travel: approx. 400 mm Table diameter approx. 630 mm T-slots 6 pieces B-axis can be swivelled manually (-5° to +95°) C-axis manually rotatable 360° Max. workpiece weight approx. 200 kg Tool holder SK40 (DIN 69871) Speed range up to approx. 8,000 rpm Spindle power approx. 7.5 – 10 kW Torque approx. 40 – 60 Nm Control: HH 124 Weight approx. 3.8 t.

BAZ Matec 30 HV BJ 2001

BAZ lid Maho DMF 250 linear BJ 2002 BAZ Cover Maho DMC 63 H BJ 2002

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions

Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System

Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar

Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Hagen & Göbel HC22E Tapping Machine - Product type HC22E -Brand Hagen & Göbel -Speed range 56-355 rpm -Table dimensions approx. 600x500mm -Year of construction 1988 Dimensions: LxWxH 1.1x0.7x2.0 meters / Weight 1000Kg

Hagen & Göbel HG22EB Tapping Machine -Type HG22EB -Brand Hagen & Göbel -Speed range 180-1120 rpm -Table dimensions approx. 600x500mm Dimensions: LxWxH 1.1x0.7x2.0 meters / Weight 1000Kg

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

Gillardon GB16 Column Drill -Drilling capacity 22mm -Tool holder adapted to MK 3 -Quill stroke 120mm -Stand projection 250mm -Distance from spindle table (min./max.) 30/380mm -Spindle speeds 400-2500 rpm -Power 0.37 kW Dimensions: LxWxH 0.7x0.7x1.8 meters / Weight 400Kg

In-line drilling machine - GILLARDON GR 20-3 -From training workshop -3x drilling units -Speed range 150-3000 rpm -Stepless speed regulation -Right/counterclockwise rotation -Morse taper MK3 -Speed display -Footswitch -Drill chuck Dimensions LxWxH 1.6x1.2x1.8 meters / Weight 1800Kg

ERD Column Drill Type B35/40 -Manufacturer Ing. Ewald Riens, Junior, Bodenburg via Hildesheim -Machine type ERD B35/40 -Column drilling machine design with gear drive -Drilling performance in steel up to 50 mm -Spindle holder MK 4 (Morse taper 4) -Quill stroke 190 mm -Projection (spindle to column) 325 mm -Column diameter 140 mm -Table size approx. 565 × 565 mm -Table adjustment height-adjustable, rotatable (360°) -Speeds (spindle) 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm -Note on speed switching: Switching only in the outlet -Feed types: Manual and automatic feed -Feed speeds 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during the run) -Motor power 2.2 kW (three-phase current) -Supply voltage 400 V -Cutting speed table SS drill for material ST60 available (operating note) Dimensions: LxWxH: 0.9x0.5x2.05 meters / Weight 800 ...

Key data: 560 mm, 560 mm, 660 mm

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

Key data: 620 mm, 800 mm, 650 mm

Horizontal BAZ LID MAHO DMC 60H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.

Key data: 1020 mm, 610 mm, 610 mm

Technical data: Manufacturer: Spinner Type: VC1020 Year of Make: 2001 Control: Siemens 810D ShopMill Travel distances: X 1,020 mm, Y 610 mm, Z 610mm Switch-on hours: 31,983 h Spindle Speed: 8,000 rpm Torque: 105/70 Nm Work table Dimensions L/W: 1,200 x 600 mm Table load: 1,000 kg Tools Tool holder: SK40 Tool changer: 32-fold Dimensions and weight Dimensions L/W/H: 2,900 mm x 2,300 mm x 2,600 mm Weight: 6,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Internal mould cooling with high-pressure system Workroom with LED work lights Chip conveyor

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 326 ...

Table: 450 x 500 mm 60 Way Tool Changer IKZ Breakage control lasers 5 axes Further technical information on request

CNC Machining Center Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Travels: X-axis 2,000 mm Y-axis 620 mm Z-axis 520 mm Clamping area 2,500 x 600 mm Mount: SK 40 Tool Magazine: 56 – Tray Spindle speed: 8,000 rpm Accessories: - Chip conveyor AME KB 448 - Paper belt filter AME PS 120 - LTA suction - Machine hood

Cutting range: M3-M10 in Steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm incl. 1 piece of new tap chuck Everything works smoothly and well

Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement.

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

Drilling Ø in St 60/GG 20: 28/32 mm Spindle holder: MK 3 Projection: 250 mm Spindle stroke: 120 mm Table size: 400 x 415 mm Largest distance between table and drilling quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Dimensions: 800 x 420/600 x 1790 mm