boring mills and machining centers used for sale (3,202)

General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm  ...

Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment.

A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment.

A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.

A Hurco CNC vertical machining center is available. Spindle power: 15kW, torque: 238Nm, travel X/Y/Z: 1060mm/510mm/610mm, table dimensions X/Y: 1020mm/610mm, tool holder: SK40, tool stations: 24, spindle speed: 10000rpm. Machine dimensions X/Y/Z: approx. 2800mm/3050mm/2800mm, weight: approx. 5900kg, control system: Ultimax. An on-site inspection is possible.

CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2015 Internal Machine No: 67 Travels: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Swivel range A-axis: +120/-95° C-axis rotation range: 360° Mount: SK 40 DIN69871 Tool magazine: 40-fold Spindle speed: 1 – 12,000 rpm Spindle swivel range: +5 / -92° - Coolant system - IKZ - Electronic handwheel HR 510 FS - Chip auger

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

YCM TV2110BYear of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpmMovement X/Y/Z : 2100/1020/762 mmTool holder : SK 50 ____________Description:In General:Year of manufacture:2012Control system:Fanuc MXP-200FP ManualGuideTraverse paths X/Y/Z:2,100/1020/762 mmSpindle speed:6,000 rpmTool holder:SK 50Clamping surface:2,300 x 1020 mmSpindle:Technology:Geared spindleSpeed:6,000 rpmMax. power:approx. 22 kWMax. torque:approx. 550 NmTool holder:SK 50Work table:Clamping surface:2,300 x 1020 mmMax. table load:3,000 kgT-slots:6x 22 mm, spacing 150 mmTool magazin:Technology:Chain magazineTool changer:Double gripperNumber of stations:40 piecesTool diameter max.:120/240 mmTool length max.:350 mmEquipment:Chip disposal: Chip conveyorCoolant supply:IKZ pump with filterEmulsion mist extraction:MechanicalSet-up mode:Electronic handwheelAccessories:2x magnetic clamping plate 800 ...

Icon 6-250Year of manuf. : 2011 Control : Fanuc 30i ____________Description:In General:Year of manufacture:2011Control system:Fanuc 30iMaximum table load:100 kgTravel range X/Y/Z:300/300/370 mmInstallation weight:approx. 33,000 kgMachining station I (X/Y/Z/B):Technology:1 x vertical spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clamping forceTool diameter/length:125/250 mmMachining station II (X/Y/Z/B):Technology:1 x vertical spindle + 1 x horizontal spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clamping forceTool diameter/length:125/250 mmMachining station III (X/Y/Z/B):Technology:1 x vertical spindleSpeed:8,000 rpmTool holder:HSK-A 63Power:31 kWTorque:197 NmTool changer:12 stationsB-axis:0.001°, pneumatic indexing, clampi ...

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible.

A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible.

CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of manufacture: 12/2010 Travel : X 800 Y 600 Z 500 Speed range : 20 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) IKZ 40 bar Scraper belt conveyor Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3D Probe Renishaw Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler 4 Pieces Height Adjustable Machine Shoes Operating Instructions

Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe / FW, Adjustable machine reamers, 11 pieces -Diameter: Ø 35 to 65 mm -Recording: MK3/MK4 -Submission/Price: complete -Transport dimensions: 520/400/H80 mm -Weight: 27 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 55.2 mm -Reamer: Type H3 52.1-65 -Recording: MK5 -Dimensions: Ø 55 x 315 mm -Weight: 2.3 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: Extension sleeve MK5 -Dimensions: Ø 52/340 mm -Weight: 2.8 kg

CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0.001) B-axis degrees: -5 / +110º Spindle nose distance - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time: 4.5 Equipment  ...

x-travel: 600 mmy-travel: 700 mmz-travel: 600 mmControl: Heidenhain Millplus total power requirement: kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible.

A vertical CNC machining center is offered. Table diameter: 320mm, travels X/Y/Z: 1270mm/660mm/610mm, spindle speed: 16000rpm, tool holder: SK40, number of axes: 4, rapid traverse: 30000mm/min, max. feed rate: 15240mm/min, rotary table spindle bore: 105mm, rotary table center height: 225mm, control system: WINMAX MIL, overall dimensions X/Y/Z: approx. 4750mm/3200mm/3000mm, weight: approx. 9000kg, operating hours: approx. 61762h. Including a Yaskawa spindle motor and Hurco transport equipment. Documentation available. Inspection possible by appointment. Expected to be available from December 2026.

Column Drill MAXION / IXION BS 25 ST - G -Well-groomed general condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Tapping device up to M20 -Spindle holder / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Projection 260mm -Speed range / infinitely variable 120-2160 rpm -Automatic feed - Work table size 500x365mm -Column diameter 110mm -Spacing/Spindle Table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: LxWxH 0.8x0.5x2 meters / Weight 300Kg

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center -CE marking -Year of construction 2011 -Control Fanuc Oi-MD -Travel X / Y / Z 720x480x530mm -Distance spindle nose / table 100-630mm -Table size 800x480mm -Max. table load 500Kg -Spindle holder BT-40 -Spindle speed 8000 rpm -Spindle motor 7.5 / 5.5 KW -Rapid traverse X / Y / Z each 48 M/min -Feed speed 1-10000 MM/min -Tool changer / 24 compartment -Tool change time (T-T) 3 sec. -Max. tool weight 7Kg -Max. tool diameter 80mm -Work light -Coolant device -Chip conveyor -Electric handwheel Dimensions: LxWxH 2.8x2.2x2.8 meters / Weight 4400Kg

EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions LxWxH 0.8x0.6x2 meters / Weight 450Kg

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg