boring mills and machining centers used for sale (3,238)

Quick radials with: - Feed - Tapping device Drilling capacity in steel 32 mm Projection 1230 mm Table surface 1200 x 500 mm Drilling stroke 180 mm Feed - automatic 0.10 - 0.15 - 0.20 mm Speed 45 - 1370 rpm Recording MK 4 Total power requirement 2.7 kW Machine weight approx. 1.8 t Dimensions approx. 2.2 x 1.8 x 2.3 m Auction-ID: A7-49782-405

Fast radials with - Tapping device - Table vertical 750 x 620mm - Horizontal table 1200 x 510mm - Emergency stop facility - Documentation Machine No. 445 Drilling capacity in steel 32 mm Projection 950 mm Speed range 51 - 1000 rpm Speed levels 12 Drill spindle Morse taper MK 4 Quill stroke 160 mm Feed range 0.075 x 0.3 mm/min Table surface 1200 x 510 mm Total power requirement 2 kW Machine weight approx. 1.9 t Space requirement approx. 1.8 x 1.2 x 2.25 m Auction-ID: A7-49782-423

Table dimensions: 1100 x 400 mmwith three grooves Throat: approx. 907 mmSpeed: from 35 to 1800 rpm Auction-ID: A7-49089-393

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-49302-3000

Manufacturer: FIL FRESATRICI (Italy ) Model: FCM Type: FCM 600 Serial Number: L1090 Year of Manufacture: 2000 Controler: Heidenhain TNC426 Machine Type Category: CNC Milling Machine Bed-type / moving table milling machine Or travelling column machining center Travels X (longitudinal): 6000 mm Y (cross): 600 mm Z (vertical): 1000 mm Spindle Taper: ISO 50 Spindle Speed: 6000 rpm Motor Power: ~10 – 25 kW Auction-ID: A1-49190-16

Machine number: 48305083Operating voltage: 400 VFrequency: 50 HzRated current: 3.2 AConnection: 0.9/1.45 kWTable dimensions: 350 x 260 mmSpeed: from 80 to 4000 rpm Auction-ID: A7-49089-480

Unused, handbook available Auction-ID: A1-40397-186

- Voltage 380 V. - Drilling capacity 18 mm. - 0.50 KW motor. - 10 speeds from 490 rpm to 2000 rpm. - Table dimensions 370 x 400 mm. - Vertical table travel approx. 200 mm. - Vertical head stroke approx. 120 mm. - Column diameter 105 mm. - Mounted on a metal table. - A jaw is included. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-9

General Description Horizontal CNC turning center designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a 12-station hydraulic turret, hydraulic chuck and chip conveyor for efficient production machining. Technical Details Machine type: CNC turning center Horizontal CNC lathe 12-station hydraulic turret Hydraulic chuck Older monochrome CNC control Chip conveyor Coolant system Condition Used industrial condition. The machine appears complete with hydraulic chuck, 12-station turret, chip conveyor and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-49124-32

Column drill with: Tapping function. Digital depth display Coolant system 2 Stage Motor Spindle protection Swivel table Swivel drill head LED lighting Packaging Dimensions: 730 x 760 x 188mm Weight 340Kg Drilling capacity in steel 40 mm Projection 300 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 500 x 460 mm Column diameter 115 mm Speed 75- 3200 rpm Feeds 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.5 kW Machine weight approx. 350 kg Dimensions L-W-H 2.2 x 0.8 x 0.7 mm Condition: never used / new (5) Auction-ID: A7-49782-430

Machine is equipped with: - chip conveyor - through spindle coolant Machine can easily be dismantled to fit in a normal trailer! Auction-ID: A1-49370-7

Technical data Manufacturer: GILLARDON Model: GT 16 Configuration Column drill with height-adjustable work table and T-slots. Manual quill delivery. Drilling depth scale available. Speed adjustment available; Machine note: Speeds can only be adjusted while running. Tool holder / drill chuck mounted. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-160

Condition:good Table clamping surface 800x500 mm X-axis travel 630 mm Y-axis travel 500 mm Z-axis travel 500 mm Spindle speed 10 - 10000 /min. Number of controlled axes 3 Central cooling no Spindle clamping taper SK 40. Max. table load 500 kg 29Heb8Zqm Total power consumption 33 kVA Sinumerik control system. sn: 28850021282 Auction-ID: A7-49260-3

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demonstration machine! Pneumatically driven tapping machine for M3 - M12 threads with: - Stable and flexible working arm. - 6 quick-change chuck with slipper clutch. Documentation in English Thread diameter M3 - M12 mm Speed infinitely variable 400 rpm. Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-49782-410

Machine number: 1863Operating voltage: 3 x 400 VFrequency: 50 HzNominal current: 14 AThroat: approx. 500 mmSpeed: from 25 to 3000 rpmTable dimensions: 560 x 480 mm, with three grooves and a three-jaw chuck, diameter: 210 mm Auction-ID: A7-49089-266

Horizontal CNC machining center for milling, drilling, boring and tapping operations on the same workpiece, with automatic pallet exchange. The horizontal design promotes rigidity, productivity, and chip evacuation. OKK HM600 machine, serial no. 444, manufacturing no. MA75865. BT50 spindle according to JIS B6339, 7/24 taper. Dimensions marked: Ø69.85 mm, 136.8 mm, 146.8 mm, 38 mm. Maximum tool carrier load: 20 kg. Power supply: AC380V, 3 phases, 50 Hz, effective power 76 kVA, current 115 A / 133 A, interrupting capacity 18 kA, electrical diagram E61-0679/A. Visible equipment: BIG-PLUS spindle system, Renishaw OMI-2 probing system, HABOR HBO-V2RPTSBM5 oil cooler (3PH 200-220V, 3750W, 75L tank, R410A, weight 185 kg). Auction-ID: A1-49171-5

RADIAL DRILL SASS mod. TRL 1600 Drilling/tapping in steel diameter mm 50 Quill taper CM 5 Vertical quill travel mm 400 Sliding quill travel mm 85 16 rotation speed values rpm 32 ÷ 1945 Max. reach (column center to spindle axis) mm 1.600 Head movement along arm mm 1.295 Vertical arm movement mm 810 Min. max. height (spindle nose to base plate) mm 390 - 1.600 Column diameter mm 380 Approximate net weight Kg 4.500 Complete with: - Hub Auction-ID: A1-48745-26

DECKEL MAHO - DMU 125 T Stock number 1039-8230 Machining Center - Vertical Control TNC 430 Heidenhain Country of origin Germany Additional information: Machine is delivered with new discs. Technical details: x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Control TNC 430 Heidenhain Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 15 / 10 kW Max. torque 500 Nm Tool holder SK 40 Work table: Table clamping area 1,500 x 1,050 mm Max. table load 2,500 kg Number of T-slots 10 T-slots - width 18 H7 mm T-slots - spacing 100 mm Tool Changer: Number of tool positions 60 pos. max. tool diameter 80 mm max. tool diameter. with free neighboring box. 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg Feeds: Rapid traverse ( X / Y / Z ) 15 m/min Feed speed 10,000 mm/min Total power requirement 29 kW Space requirements appr ...

Manufacturer: HELLER Model: MCH 250 Machine Type: Horizontal Machining Center Application Type: Milling Year: 2007 Control Unit: • Control Brand: SIEMENS • Control Model: 840D Movement: • Number of Axes: 4 • X-Axis Travel: 800 mm • Y-Axis Travel: 800 mm • Z-Axis Travel: 800 mm Technical Specifications: • Spindle Speed: 6,000 RPM • Tool Holder: BT50 • Number of Tool Positions: 100 Additional Information: • 4th-axis rotary table with 1 degree indexing • Workpiece/tool probing system (touch probe) Find more here - .ucymachines/ Contact us at - sales@ucymachines

OPTIMUM Opti B 23 Pro bench drill, built in 1998, in robust 400 V version Equipped with 12 speed levels, MK2 spindle mount and height-adjustable work table Drilling capacity approx. 25 mm Auction-ID: A1-49712-11

Technical details Type: CNC turning center Control system: ZIT Sistema 500T Configuration: - Horizontal CNC lathe - Fully enclosed machining area - 10-station hydraulic indexing turret - Tailstock installed - CNC-controlled longitudinal and cross axes - Electrical control cabinet - Hydraulic unit - Coolant enclosure Application: - CNC turning - Facing - Boring - Thread cutting - Precision machining of rotational components Construction: - Heavy-duty cast-iron machine bed - Early-generation CNC control system - Automatic turret indexing Dimensions: - Length: Approx. 3300 mm - Width: Approx. 1900 mm - Height: Approx. 2100 mm Weight: Approx. 4200 kg Condition: Used Observed condition: - Machine appears substantially complete - 10-station hydraulic turret installed - Tailstock present - CNC electronics and electrical cabinet installed - Hydraulic chuck missing - Heavy chip and coolant residu ...

Auction-ID: A1-49000-26

General Description CNC flat-bed turning center manufactured by HAWCTON, model CP632. Designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a FANUC CNC control, hydraulic chuck and tailstock for general production machining. Technical Details Manufacturer: HAWCTON Model: CP632 Machine type: CNC flat-bed turning center FANUC operator panel and CNC control 3-jaw hydraulic chuck Tailstock Hydraulic unit Complete electrical cabinet FANUC electronics Full safety enclosure Coolant system Condition Used industrial condition. The machine appears complete with FANUC control system, hydraulic chuck, tailstock, hydraulic unit, electrical cabinet, safety enclosure and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-49124-35

Table Ø 450mm, including drill bit Auction-ID: A1-49000-30

x-travel: 650 mmy-travel: 650 mmz-travel: 680 mmrotary table tiltable: 360 GradNumber of working hours: 55.000 htool taper: HSK 63 spindle turning speed range: 20.000 U/minmax. torque on the spindle: 85 table-size: 400 x 500 mmtable load: 0,5 t4-axis machineChain-type tool magazine: 60 positionsChip conveyorPallet changerCoolant filtration systemHigh-pressure coolant through the spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-49302-37

Machine already ready for transport, to be assessed on viewing day. Needed for transport 7.5 mtr Auction-ID: A1-48648-2

incl. additional indexing table 4/5 axis machining Not included clamps and chuck Auction-ID: A1-48648-128

Internal coolant system, coolant tank, chip conveyor, ATC 24 positions Auction-ID: A1-48648-33