boring mills and machining centers used for sale (3,287)

Auction-ID: A3-43547-1

x-travel:780 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:10 tNumber of axles:5 St.spindle turning speed range:20-12.000 U/minnumbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mmRound TableB-AxisTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 €: 141.86 €: 1 : 23 mm: MK 2 : 260 mm: 20 - 2000 U/min: 1.5 kW: M16x1 : 430 mm: 715 mm: 1800 mm: 290 kg: manuell mm/U: 110 mm: 230 - 850 mm: 420 x 340 mm: 100 mmDrilling capacity / normal drilling capacity 23/25 (in E335/ST60)Manual feedMain switchTapping attachementControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plugOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:700 mmy-travel:630 mmz-travel:700 mmweight of the machine ca.:15 tdimensions of the machine ca.:4,20 x 2,90 x 2,90 mpallet size::500 x 500 mmtool taper:SK 40 Tool taper:HSK-A 63 turning speed range:10.000 U/min

x-travel:2000 mmy-travel:1600 mmz-travel:1140 mmb-axis:0.0001° x 360° °number of pallets:4 table surface area:1000 x 1450 mmmax. table load:6.000 kgturning speed range:4 - 10000 U/minpower capacity at 100 % load:40 kW kWtool taper:HSK100 DIN69893A machine weight ab.:63.000 kgspace required L x W X H:12320 x 11000 x 4700 mmincl. 50 x HSK100 tool tapers

ul>CNC control: Heidenhain TNC 530 5-axis(B-axis head ±90°, C-axis table 360°)Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mmSpindle speed: 20 – 12,000 rpmSpindle power: 15 kWCone: ISO40Fast feeds: 30 m/minTable: 1500 x 795 mmMax table load: 900 kgTool magazine: 32 positionsSpindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-47716-207

CNC Control: Siemens 828D ShopMillCourses X/Y/Z: 1220 / 600 / 610 mmTotal power: 10 / 14 kWSpindle speed: 8,000 rpmSpindle taper: SK40Tool magazine: 20 positionsEquipment: Chip conveyor, coolant, technical documentationPower supply: 400 V – 50 HzManufacturer: HuronYear: 2012Serial number: M02741Estimated dimensions (mm): 3500 x 2800 x 3200Weight (kg): 10000 Auction-ID: A1-47716-275

CNC vertical machining center for machining metal parts. CNC control: Heidenhain TNC 410Axes: 3 axesStrokes: X 1,020 mm / Y 610 mm / Z 560 mmTable: 1,400 ×,650 mmMaximum load table: 2,000 kgSpindle taper: BT 40Spindle speed: 10,000 rpmSpindle power: 15 kWTool changer: 40 positionsHigh-pressure coolant: 20 bar through spindleEquipment: Chip conveyor, 2 augers, spindle cooling, closed cab, machine lighting Auction-ID: A1-47716-247

CNC control: Heidenhain TNC 530Machine 5 simultaneous axesStrokes: X = 730 mm, Y = 560 mm, Z = 560 mmSpindle speed: up to 12,000 rpmCone: SK40Feeds: 20 – 20,000 mm/minFast feeds: 30 m/minTable: 1000 x 600 mmMax load table: 800 kgTool changer: 24 / 30 positionsMachine hours≈ 31,481 hSpindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-47716-203

Technical data WEBO Column Drill / Stand Drill Type B16 Drilling capacity: 16 mm 26 speed levels Speed range: 245 - 4000 rpm Drilling depth: approx. 160 mm Table size approx. 600 x 500 mm Configuration With height-adjustable drill table Coolant equipment available Speed table and depth scale available Drill chuck mounted Heavy casting design Used condition Auction-ID: A7-47277-3019

Manufacturer: HERMLEYear: 1999Type: Universal CNC machining center Numerical control: Heidenhain TNC 430 PAAxes: 5 axes (3 linear axes + 2 rotary axes in positioning)Strokes: X 800 mm / Y 500 mm / Z 500 mmTable: integrated roto-pallet table – max. load 250 kgSpindle: ISO 40 – 20 to 15,000 rpmTool magazine: 30 tools SK40Equipment: remote crank, external coolant, external blowingWeight: approx. 8,500 kgNotes: Robust and precise CNC universal machining center, functional machine. Auction-ID: A1-47716-224

CNC vertical machining center for machining metal parts. Numerical control: Hurco WinMaxAxes: 4 axes (including 1 rotary axis)Strokes: X 660 mm / Y 355 mm / Z 457 mmTable: 762 × 355 mmMaximum load table: 500 kgSpindle taper: ISO 40Spindle speed: 10,000 rpmSpindle power: 11 kWTool changer: 24 tools (RANDOM type)Equipment: 1-axis divider with tailstock Auction-ID: A1-47716-245

x-travel:760 mmy-travel:760 mmz-travel:760 mmtotal power requirement:43 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:2,7 x 4,73 x 2,87 mmax. table loading capacity:500 kg

Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-47277-1008

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D PowerlineStrokes: X 640 mm / Y 600 mm / Z 500 mmTable: 850 × 600 mmMaximum table load: 600 kgSpindle taper: SK 40 (DIN 69871)Spindle speed: 1 – 8,000 rpmFast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Toolchanger: 30 positionsSpindle motor power: 12 / 17 kWEnergized hours: 43,000 hOperating hours: 15,000 hNote: Without tool holder Auction-ID: A1-47716-242

IXION TL 500 SVA Deep Hole Drilling Machine Manufacturer: IXION Model: TL 500 SVA Year of Manufacture: 1985 Serial Number: 113178 Origin: Germany Drilling Capabilities: Drilling diameter: 1.5 – 18 mm Advertised drilling depth: 600 mm Table and movements: Fixed table: 700 × 1,350 mm Circular tabletop: 1,000 × 500 mm Longitudinal stroke: 600 mm Stroke in the direction of drilling: 400 mm Swivel table: 180° Drilling unit: Vertical carriage stroke: 250 mm Unit orientation: ±15° Spindle Taper: CM3 Spindle and control: Number of speeds: 8 Speed range: 240 – 2,400 rpm CNC Control: Bosch Alpha Digital display: Heidenhain 3-axis Power and Size: Engine power: 1.0 / 1.6 kW Installed power: 10 kVA Dimensions (L × W × H): 2,000 × 1,500 × 1,800 mm Weight: approx. 1,350 kg Auction-ID: A1-47716-265

: neu : 2024 : 3982 : prompt, Zwischenverkauf v : Spanien : 10830 €: 207.94 €: 1 : 35 mm: MK 4 : 300 mm: stufenlos 100 - 2.000 U/min: 3 kW: bis M 27 : 1100 mm: 600 mm: 1950 mm: 360 kg: 0,10 / 0,20 / 0,30 (3) mm/U: 150 mm: 125 mm: 90-890 mm: 1250 mm: 480 x 480 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEcolumn drilling machine with vario gear1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display3 automatic feedschuck guardleft-right drillingT-Slots and integrated coolant equipment in base standintegrated lightingdrill guardHEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTSreverse for tappingfast and precise setting and control of the speed without switching operations and without defined levelsmore particularly robust parts for wear resistant operation and smooth runningcompact design with high performanceCE normsuser manual  ...

Hurco BMC 30 HT/M with Ultimax 3 control in compact form: Working area (X/Y/Z): 760 x 460 x 610 mm Table surface: 1,020 x 400 mm Table load: max. 500 kg (optionally up to 700 kg) Spindle speed: max. 8,000 rpm (high torque) Spindle holder: SK 40 Spindle power: 11 kW / 15 kW Tool Changer (ATC): 24 places Rapid traverse (X/Y/Z): 24 / 24 / 15 m/min Control: Ultimax 3 (Dual Screen) Machine weight: approx. 4,800 kg Space requirement: approx. 3.8 x 4.0 x 2.7 m (incl. work area) Auction-ID: A7-47277-1014

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 €: 12 mm: 19 mm Weldon : 0.45 kW: 316 mm: 235 mm: 328 mm: 115 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThe PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters.The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits.Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate currentcondition of the drill and give safety information.Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red)Features and benefits:• LED Monitoring System indicates current condition of the drill and gives safety information• LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece• dual bars guide  ...

Manufacturer: HEAD / KENTModel: CUV-10 (KMV 10)Year: 1999Robust CNC vertical machining center, Meehanite cast iron construction, suitable for machining single parts and small to medium series.Numerical control: FANUC OMDStructure: Meehanite cast ironTurcite B-coated slidesRigid threadPortable electronic crankFull protective guardSprinkler systemWork light and end-of-cycle lampToolboxRaces:X: 1,020 mmY: 510 mmZ: 510 mmDistance between spindle nose and table: 105 to 740 mmTable: Dimensions: 1,200 × 600 mmT-slots: 18 mm – 3 groovesMax. permissible load: 1,000 kgSpindle:Speed: 30 – 7,500 rpmTransmission: ZF gearbox – 2 rangesCone: BT 40Engine power: 11 kWFeeds:Fast feed (X,Y,Z): 24 m/minWorking feed: 1 – 10,000 mm/min Toolchanger: Capacity: 20 toolsMax. tool weight: 6 kgBidirectional selectionMachine dimensions: 2,880 × 2,420 × 2,980 mmFloor space required: 4,000 × 3,000 mmNet we ...

: neu : 3935 : ca. 10 Wochen ab Auftrags : Spanien : 18150 €: 348.48 €: 50 mm: MK 4 : 400 mm: 54 - 1032 (9) U/min: 2.9 kW: M36 : 600 mm: 1200 mm: 2500 mm: 710 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 230 mm: 200 mm: 50 - 850 mm: 1290 mm: 550 x 550 mm: 1060 x 600 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality gear drilling machinecooling equipmentVDE electricchuck protectionleft right drillinglightingfront handwheel for sensitive feedtable turn and tiltableuser manual in GERMANOPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBCALTERNATIVE:ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 €: 325.63 €: 40 mm: MK 4 : 360 mm: 61 - 1.169 (9) U/min: 2.2 kW: M33 : 550 mm: 950 mm: 2363 mm: 610 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 200 mm: 175 mm: 35 - 835 mm: 1240 mm: 550 x 550 mm: 950 x 550 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEautomatic feedgear drivefixed machine tabletiltable turntablefront wheel for sensitive fine feedcoolant equipmentlightingOPTION (PRICE ON REQUEST):Manual tapping system ALTERNATIVE:ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 €: 241.34 €: 50 mm: MK 4 : 350 mm: 93 - 152 - 204 - 298 - 44 U/min: 3 kW: M35 : 480 mm: 755 mm: 2265 mm: 435 kg: 0,1 / 0,18 / 0,24 mm/U: 180 mm: 150 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEGear drive3 aut. feedssliding machine tablesolid drill headtiltable turntablefront wheel for sensitive fine feed(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipment Lcoolant equipment and machine base with T-slots ERBReverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: CNC vertical machining center Manufacturer: Mikron / Haas Model: VCE 2000 / LCE 1100 Control: Haas CNC control system Year: 2000 Serial number: 18418 Tool changer: Automatic carousel tool changer Spindle taper: SK / ISO tool holder system Machine configuration: Traveling column vertical machining center Coolant system: Integrated coolant and chip evacuation system Chip conveyor: Integrated auger chip conveyor Voltage: 360 / 480 V Frequency: 50 / 60 Hz Table dimension 800 x 3100 mm; Lift crane not included; pack of tools included - as shown in the photo Remarks: Signs of normal industrial wear and usage visible Auction-ID: A7-45993-172

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 €: 138.19 €: 30 mm: MK 3 : 250 mm: 245 - 4000 U/min: M25 : 400 mm: 655 mm: 1185 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingautomatic tool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV1200 Year: 2010 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 1,200 mm - Y-axis travel: approx. 600 mm - Z-axis travel: approx. 600 mm - Table size: approx. 1,300 x 600 mm - Spindle speed: up to approx. 8,000–10,000 rpm (typical for model) - Power: 12 kVA (according to plate) Equipment: - Fully enclosed machining cabin with double doors - Heidenhain control panel with screen & keyboard - Electronic handwheel - Tool holders rack (side mounted) - Chip conveyor - Coolant system - Working light Application: - CNC milling and machining of metal components - Toolmaking and precision part production Condition: Used Auction-ID: A7-45993-42

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmContinuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerCoolant deviceLED lighting with pivot armDrill package 3 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the soft ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 €: 10 mm: B 16 : 180 mm: 250 - 3000 U/min: 0,45 kW: 400 mm: 248 mm: 460 mm: 30 kg: 50 mm: 105 - 245 mm: 300 x 200 mm: 50 mmContinuous/normal drilling performance 10/12 (in E335/ST60)Manual feedDigital speed displayRobust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15095.86 €: 289.84 €: 30 mm: MK 3 : 300 mm: 0 - 4000 U/min: 3 kW: M30x3,5 : 900 mm: 610 mm: 1980 mm: 385 kg: 0,10 / 0,16 / 0,25 mm/U: 125 mm: 150 - 700 mm: 590 x 450 mm: 125 mmDrilling capacity / normal drilling capacity 30/35 (in E335/ST60)Main switchDispositif de taraudageControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEmergency stop buttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationMechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed ratesDrilling cross with pushbutton (on/off) for feed rateIn tapping mode: Right-left lifting via drill cross switch or opti ...