boring mills and machining centers used for sale (3,225)

General Description Horizontal CNC turning center designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic turret, programmable tailstock and chip conveyor for efficient production machining. Technical Details Machine type: CNC turning center Horizontal CNC lathe 8-station hydraulic turret Hydraulic tailstock Fanuc-based CNC control Chip conveyor Coolant system Condition Used industrial condition. The machine appears complete with hydraulic turret, hydraulic tailstock, Fanuc-based CNC control, chip conveyor and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-50745-31

General Description CNC flat-bed turning center manufactured by HAWCTON, model CP632. Designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a FANUC CNC control, hydraulic chuck and tailstock for general production machining. Technical Details Manufacturer: HAWCTON Model: CP632 Machine type: CNC flat-bed turning center FANUC operator panel and CNC control 3-jaw hydraulic chuck Tailstock Hydraulic unit Complete electrical cabinet FANUC electronics Full safety enclosure Coolant system Condition Used industrial condition. The machine appears complete with FANUC control system, hydraulic chuck, tailstock, hydraulic unit, electrical cabinet, safety enclosure and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-50745-35

General Description Horizontal CNC turning center designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a 12-station hydraulic turret, hydraulic chuck and chip conveyor for efficient production machining. Technical Details Machine type: CNC turning center Horizontal CNC lathe 12-station hydraulic turret Hydraulic chuck Older monochrome CNC control Chip conveyor Coolant system Condition Used industrial condition. The machine appears complete with hydraulic chuck, 12-station turret, chip conveyor and coolant system. Operational status, spindle condition and CNC functionality have not been tested. Auction-ID: A7-50745-32

Auction-ID: A7-50745-18

Technical details Manufacturer: Csepel Type: Radial drilling machine Configuration: - Heavy-duty radial arm - Rotating column - Vertically adjustable drilling head - Geared spindle drive - Manual and power spindle feed - Drill chuck installed - Large T-slotted box table - T-slotted base plate - Speed and feed selector gearbox - Mechanical control system Application: - Drilling - Boring - Tapping - Reaming - Machining of large steel workpieces Construction: - Heavy-duty cast-iron frame - Conventional mechanical operation Estimated drilling capacity: Approx. 75 mm in steel Estimated arm reach: Approx. 1750–2000 mm Dimensions: - Length: Approx. 2500 mm - Width: Approx. 1200 mm - Height: Approx. 2900 mm Weight: Approx. 4500 kg Condition: Used Observed condition: - Machine appears substantially complete - Original gearbox and controls installed - Drill chuck fitted - Large cast T-slotted ta ...

General Description Vertical coordinate boring machine designed for precision boring, drilling and machining of tooling, molds, gauges and precision mechanical components. The machine is equipped with a precision coordinate table and rotary work table for accurate positioning and machining operations. Technical Details Machine type: Vertical coordinate boring machine Vertical precision spindle Large precision rotary table Precision graduated spindle feed Coordinate table with longitudinal and cross travel Enclosed column drive Heavy cast iron construction Condition Used industrial condition. The machine appears complete with precision spindle, rotary table, coordinate table and enclosed drive system. Operational status, spindle accuracy and positioning precision have not been tested. Auction-ID: A7-50745-42

General Description CNC turning center manufactured by MASHSTROY, model CT 161. Designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic chuck, programmable tailstock and fully enclosed machining area for production applications. Technical Details Manufacturer: MASHSTROY Model: CT 161 Machine type: CNC turning center Horizontal CNC lathe Hydraulic chuck 12-station turret Programmable tailstock Full safety enclosure Original CRT-based CNC control Chip conveyor / chip evacuation system Coolant system Original documentation included Condition Used industrial condition. The machine appears complete with hydraulic chuck, 12-station turret, programmable tailstock, chip conveyor, coolant system and original documentation. Operational status, spindle condition and CNC functionality have not been tested. Auction-I ...

General Description Twin-opposed spindle CNC turning center manufactured by Shanghai SIO Electromechanical Technology Co., Ltd., model FC-500. Designed for high-productivity machining of shafts and similar components by enabling simultaneous or sequential machining from both ends. The machine is equipped with Siemens CNC control, hydraulic workholding and automatic chip removal. Technical Details Manufacturer: Shanghai SIO Electromechanical Technology Co., Ltd. Model: FC-500 Machine type: CNC twin-spindle turning center Year: 2019 Serial number: 20191011 Power supply: 400 V, 50 Hz Connected load: 25 kVA Twin opposed spindle configuration Siemens SINUMERIK CNC control Siemens SINAMICS servo drives INVT frequency inverters Hydraulic workholding system Automatic lubrication Chip conveyor Electronic handwheel (MPG) Precision linear guideways Ball screw driven axes Condition Good used indus ...

Technical details Manufacturer: Csepel Type: Radial drilling machine Configuration: - Heavy-duty radial arm - Rotating column - Vertically adjustable drilling head - Geared spindle drive - Manual and power spindle feed - Large T-slotted box table - T-slotted base plate - Speed and feed selector gearbox - Integrated work light - Coolant system Application: - Drilling - Boring - Tapping - Reaming - Countersinking - Machining of large steel workpieces Construction: - Heavy-duty cast-iron frame - Conventional mechanical operation - Industrial radial drilling machine Estimated drilling capacity: Approx. 60–75 mm in steel Estimated arm reach: Approx. 1600–2000 mm Dimensions: - Length: Approx. 3000 mm - Width: Approx. 1300 mm - Height: Approx. 3300 mm Weight: Approx. 6500 kg Condition: Used Observed condition: - Machine appears substantially complete - Original gearbox and controls installe ...

General Description Horizontal metal-cutting band saw - honing machine designed for precision cutting of steel, stainless steel and other metal profiles, tubes and solid materials. The machine is equipped with a hydraulic feed system, hydraulic clamping vise and coolant system for production cutting applications. Technical Details Machine type: Horizontal metal-cutting band saw Hydraulic feed system Hydraulic clamping vise Automatic feed components Drive motor Coolant system Safety enclosure Condition Used industrial condition. The machine appears mechanically complete with hydraulic feed, clamping vise, coolant system and safety enclosure installed. Cosmetic wear, oil residue and metal swarf are visible, consistent with industrial use. Operational status and cutting accuracy have not been tested. Dimensions Length: Approx. 2,800 mm Width: Approx. 1,800 mm Height: Approx. 1,900 mm Wei ...

x-travel: 800 mmy-travel: 1050 mmz-travel: 850 mmcontrol: Siemens 840D Celos Main spindle:: power capacity - main spindel: 35/25 kWSpeed Mainspindle: 18000 min/-1max. Torque: 288 Nmtool taper: HSK 63 Swivel range: -30/+180 °work table:: table surface area: dia. 800 mmmax. table load: 1800 kg0: dia 950 x 1450 mmc-axis: 360 x 0,001 °Tool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 120 mmmax. size of tooling: 550 mmmax. tool weight: 15 kgfeeds:: rapid traverse ( X / Y / Z ): 60 m/mincapacity: - kVAweight of the machine ca.: 15 tdimensions of the machine ca.: 4,47 x 2,35 x 3,2 m5 Axis Machining Center - Universal- CNC Control Siemens 840D Celos- Automatic Swivel Milling Head wit B-Axis- ATC 30-fold (HSK 63)- Coolant with Paperbandfilter & IKZ 20 bar- Chip Conveyor- ProbeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmB - axis: -120 / + 30 °NC- swivellable rotary table - Ø: 700 mmcontrol: iTNC530 Heidenhainnumber of spindle speeds: 10.000 1/minspindle taper: SK 40 DIN 69871max. torque at 40% / 100% load: 28 / 19 kWtool change unit: 2 x 16 Pos.table-size: 1250 x 700 mmtable load capacity: 650 kptotal power requirement: 44 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 3,50 x 3,20 x 2,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 2200 mmy-axis: 1700 mmz-axis: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control: WinMaxTravel ranges:X/Y/Z: 2200 x 1700 x 750 mmSpindle speed: 12,000 rpmTool holder: SK 40 Big PlusDrive power: 18/26 kWTool changer: 40-stationTable clamping surface: 2100 x 1600 mmDistance from spindle nose to table: 150 – 900 mmEquipment/Accessories:Workpiece positioning detection and tool length calibration via probeDirect measuring system (X/Y/Z axes)Production package for high-performance chip removalInternal coolant supply (ICS) 20 barChip conveyorCoolant system (1050 liters) with belt filter unitCoolant spray gunChip splash guard enclosureMachine status signal lightLED machine lightSet of machine leveling padsParts list and circuit diagrams on CDProgramming and maintenance manuals via control help functionThe data for this ad was cre ...

: 0550 mm: 410 mm: 480 mm: 650x410 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 450 mm: 500 mm: 900x450 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 430 mm: 460 mm: 900x410 mm: SK 40 : 8.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 180 mmtable surface area: 765 x 620 mm0: 130 - 1750 U/minfeed: 0,1 - 0,2 - 0,3 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,8 x 2,15 mDrilling machine with:Power feed2 gear stagesTapping attachmentFootswitchMachine lightCoolant systemEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 1230 mmtable surface area: 1200 x 500 mmbore stroke: 180 mmfeed - independent: 0,10 - 0,15 - 0,20 - 0,30 mmturning speeds: 45 - 1370 U/mintaper MK: 4 total power requirement: 2,7 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x 2,3 mQuick radial with:- Feed- Thread cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 280 mmbore stroke: 145 mmtaper MK: 3 MKtable-size: 540 x 480 mmfeeds: 0,08 bis 0,32 mm/Uturning speeds: 180 - 2000 U/mintotal power requirement: 3,0 KWweight of the machine ca.: 0,9 tdimensions: 1,2 x 0,8 x 2,4 mColumn drilling machine with:- Power feed- Thread-cutting attachment- Coolant pump- Machine light- Incl. machine vice- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drilling capacity diameter max.: mmtable length: mmtable width: mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 11.200 x 5.550 mmtool taper: SK 100 total power requirement: 83 kWweight of the machine ca.: 173 tdimensions of the machine ca.: mSpindle diameter: 200 mmMachining width (X-axis): 6,000 mmMachining height: 3,150 mmMax. machining depth: 1,985 mmRam cross-section: 530 × 550 mmTable load capacity: 20 tFloor plate area: 11,200 × 5,550 mmTable model: S20 MPTable size: 2,200 × 2,500 mmTool holder: SK 100Total power requirement: 83 kWMachine weight: approx. 173 tIncludes large and small angular milling headsInternal reference (OB No.): 22979X-axis machining width: 6,000 mmIncludes 6 floor plates, each 5,600 × 1,850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWControl: Heindhain TNC 410 total power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,9 mmechan. Overhauled in 2002 and equipped with CNC control- CNC control Heidenhain TNC 410- RENISHAW sensor OMP 40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2017 : 3901 : China : 8490 €: 1 : 6790 €: 32 mm: MK 4 : 300 - 1.000 mm: 32 - 2.500 (16) U/min: 1760 mm: 800 mm: 2080 mm: 1600 kg: 530 - 1.000 mm: 2.2 kW: 240 mm: 250 mm: 0,75 kW: 0,10 - 1,25 (8) mm/Ubox table 600 x 455 x 455 mmcoolant equipmentmachine lampmechanical clamping for height adjustment and spindle stockelectr. clamping for arm rotationmachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machi ...

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 €: 1 : 12480 €: 42 mm: MK 4 : 280 - 1.100 mm: 44 - 1.500 (12) U/min: Stahl: M 25, Guss: M 38 : 1880 mm: 870 mm: 2210 mm: 1800 kg: 470 - 1.270 mm: 0,05 - 0,15 (3) mm/min: 2.2 kW: 260 mm: 280 mm: 1.725 x 715 x 180 mm: 0,75 kW: 635 x 520 x 415 mm: 2530 mmDEMO MACHINEleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with mechanical clampingelectric height adjustment of extension arm and mechanical clampingmechanical clamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum sec ...

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: total power requirement: --- kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 7800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 935 mmy-travel: 850 mmz-travel: 650 mmcontrol: Heidenhain TNC 640 Main spindle:: turning speed range - main spindle: 20000 min/-1power capacity - main spindel: 35 kWtool taper: SK 40 work table:: table surface area: 1000 x 750 (dia 850) mmmax. table load: 1500 kgtool magazin:: number of toolpositions: 60 pos.tool taper: SK40 feeds:: feed speeds: 40.000 mm/minrapid traverse: 40 m/minAccelaration: 5 m/s²c-axis: 360 °A-Axis: +/- 120 °total power requirement: 46 kVAweight of the machine ca.: 14 tdimensions of the machine ca.: 3,1 x 4,4 x 3,2 m5-axis universal machining centre equipped with:- Heidenhain TNC 640 CNC control- 60-position ATC (SK 40)- Heidenhain TS 460 touch probe- Chip conveyor with coolant- Paper belt filter- IKZ 40 bar- Blum laser tool measurement system- NC swivelling rotary table, diameter 850 x 750 mm16,800 spindle hours and 48,000 hours of operation.The d ...

x-travel: 800 mmy-travel: 950 mmz-travel: 1020 mmControl: SIN840D sl B - axis: 360 x 0,001 °A - axis: -180 / +45 x 0,001 °feed x-axis: 1 - 65.000 mm/minfeed y- axis: 1 - 50.000 mm/minFeed z- axis: 1 - 80.000 mm / min.rapid traverse X/Y/Z: 60 / 50 / 80 m/minspindle turning speed - stepless: 1 - 16.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 35,00 KWmax. torque at 40% / 100% load: 223 / 160 Nmspindle diameter in front bearing: 80 mmtool taper: HSK-A63 tool magazin:: 50 tool length - max.: 400 / 465 mmtool diameter: 72 mmtool diameter with 2 vacant positions: 160 mmtool total weight: 8,00 kgsize of pallet: 630x630 mmworkpiece weight: 700 kginterference diameter: 900 mmtotal power requirement: 50,00 kWweight of the machine ca.: 26,00 tdimensions of the machine ca.: 7,00 x 4,50 x H3,50 m5-axis machining center withSIEMENS Sinumerik 840D SL control,integrated  ...

: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.