boring mills and machining centers used for sale (3,233)

x-travel:450 mmy-travel:450 mmz-travel:450 mmweight of the machine ca.:14 tsize of pallet:320 x 320 mmnumber of spindles:2 Double spindle 4-axis machining center Horizontal4 machine platesRenishaw probeControl Siemens Sinumerik 840DWorking space (X / Y / Z): 450x450x450 mmLoad pallet / table max .: 300 kgAcceleration: 10 m / s²Rapid traverse: 60 m / minPallet size: 320 x 320 mmChip-to-chip time: 2.6 sWorkpiece height max .: 700 mmTool holder: HSK 63Tool places: 2x 60Tool spindle: 10,000 rpm, 95 NmSpeed increase to 18,000 rpmInfrared receiver for probe,Make Renishaw Vaf72a0pTool magazine with 60 placesControl panel on the workstationControl panel on the tool installation siteWorkpiece positioning stations can be rotated manuallywith hydraulic workpiece clamping 60 barPneumatic support control on the workstationAutomatic swing gateExtended coolant layer 70 bar / 1500I /VF 250 Coolant Cool ...

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 82.000 h "machine on", approx. 48.800 h "spindle on"

x-travel:700 mmy-travel:550 mmz-travel:500 mmtool taper:SK40 spindle speed max.:12.000 U/minTool changer:30 fach electronic handwheel chip conveyor

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 €: 10 mm: B 16 : 180 mm: 250 - 3000 U/min: 400 mm: 248 mm: 460 mm: 30 kg: 50 mm: 105 - 245 mm: 300 x 200 mm: 50 mmContinuous/normal drilling performance 10/12 (in E335/ST60)Manual feedDigital speed displayRobust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmContinuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerCoolant deviceLED lighting with pivot armDrill package 3 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the soft ...

x-travel:1.250 mmy-travel:710 mmz-travel:710 mmtable surface area:1500 x 800 mmtable load capacity:800 kgturning speeds:12000 1/minspindle drive:15 / 10 kWcontrol:MILLPLUS iT HEIDENHAINspindle taper:SK 40 tool change unit:60 Pos.capacity:44 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:3,5 x 2,65 x 2,65 m5 axis simultaneously machining center,B-axis (-120° / +30°),NC-rotary-table integrated in rigid table,direct measuring system,3D probe infrared, HEIDENHAIN TS 640,internal coolant supply 40 bar, 600l,flushgun,chipconveyor,mode 4,3D quickset software (no hardware),Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 €: 141.86 €: 1 : 23 mm: MK 2 : 260 mm: 20 - 2000 U/min: 1.5 kW: M16x1 : 430 mm: 715 mm: 1800 mm: 290 kg: manuell mm/U: 110 mm: 230 - 850 mm: 420 x 340 mm: 100 mmDrilling capacity / normal drilling capacity 23/25 (in E335/ST60)Manual feedMain switchGewindeschneideinrichtungControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plugOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 257.02 €: 80 mm: 28 mm: 120 mm: 12 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serial Number: SH501AG0061 Power: 22 kW Type: CNC Horizontal Machining Center with Pallet Changer (2 Pallets) Routes: X 800 mm, Y 700 mm, Z 700 mm Pallet size: 500 x 500 mm Maximum load per pallet: 500 kg Spindle speed: up to 12000 rpm Tool Holder Cone: MORE BT-40 Tool Capacity: 40 Fast Feed: 50000 mm/min Voltage: 200 V Description: Machine suitable for high-precision machining with automatic tool changer and pallet system Manufactured in: Japan Auction-ID: A7-44864-11

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 5309.85 €: 102.48 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: 0.75 kW: M12 (steigungsabhängig) : 705 mm: 355 mm: 1825 mm: 195 kg: manuell mm/U: 82 mm: 180 - 870 mm: 340 x 280 mm: 100 mmDrilling capacity / normal drilling capacity 18/20 (in E335/ST60)Thread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobManual feedEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:2300 mmy-travel:1200 mmz-travel:600 mmturning speeds:30-10.000 1/minmax. torque on the spindle:254 / 159 Nmcontrol:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos.spindle:40 / 25 kWfixed working table:surface area:1.100 x 1.100 mmrotary table:1.100 x 1.100 mmrapid traverse:30 m/mintotal power requirement:69 kVAweight of the machine ca.:20 tuniversal machining center with indexing head (2,5°),NC-rotary table, max. table load 1.500kg,internal coolant supply 30 bar, paper filter,el. handwheel,chipconveyor,automatic doors,flush gun,no touch probe available,approx. 81.400 h main swich onapprox. 72.200 h control onapprox. 26.700 h program running on machine under power , for functional testing

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15095.86 €: 289.84 €: 30 mm: MK 3 : 300 mm: 0 - 4000 U/min: 3 kW: M30x3,5 : 900 mm: 610 mm: 1980 mm: 385 kg: 0,10 / 0,16 / 0,25 mm/U: 125 mm: 150 - 700 mm: 590 x 450 mm: 125 mmDrilling capacity / normal drilling capacity 30/35 (in E335/ST60)Main switchDispositif de taraudageControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEmergency stop buttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationMechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed ratesDrilling cross with pushbutton (on/off) for feed rateIn tapping mode: Right-left lifting via drill cross switch or opti ...

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:30000 1/mintool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,laser,prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe),mode 4,oilmist suction,spindle chiller,no internal coolant supply,approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in totalmachine in good condition (test report available)

x-travel:1000 mmy-travel:610 mmz-travel:600 mmtable-size:1150 x 600 mmtable load capacity:1000 kgrapid traverse X- and Y-axis:24 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:10.000 1/minspindle drive:15/22,5 kWtool change unit:30 Pos.CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mmweight of the machine ca.:7 tdimensions of the machine ca.:3,2 x 2,2 x 2,7 mvertical machining center,- internal coolant supply 30 bar- chipconveyor- cartridge filter- flat tracks- el. handwheel- prepared for 4th axis- 3D touchprobe RENISHAW OMP 60- indirect measuring system- accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray)approx. 6.000h "spindle on"

x-travel:800 mmy-travel:700 mmz-travel:600 mmtable load capacity:800 kgcontrol:SIEMENS 840D shopmill turning speeds:12.000 1/mintool adaptor:HSK 63 rapid traverse:50 m/mintool change unit:30 Pos.electr. connected load with add. coolant:56 kVAweight of the machine ca.:9,5 ttransport measurements machine:4 x 2,5 x 2,75 m5 Axis simultaneously machining center,Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm,internal cooling device 40 bar, 600lprepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe),prepared for el. handwheel (without handwheel),mode 4,approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h)

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 21.200h "machine on", approx. 1.300h "spindle on"

x-travel:2600 mmy-travel:1100 mmz-travel:900 mmtable surface area:3200 x 1100 mmrotary table diameter:1050 mmtable load:1,2 tcontrol:Heidenhain iTNC 530 ergoline 19" turning speeds:20 - 10.000 1/mintaper ISO:SK 50 max. torque on the spindle:288 / 187 Nmtool change unit:60 Pos.rapid traverse:40 m/minspindle:44 / 32 kWweight of the machine ca.:25 tdimensions of the machine ca.:6,70 x 3,40 x 2,95 m5-axis universal machining center,rigid table with integrated NC-rotary table left side and B-axis in milling head,direct measuring system,internal Coolant 40 bar, coolant tank 600 l,Swarf Conveyer Rotoclearairblast through spindle,3D Touch probe HEIDENHAIN TS 649,mode 4,prepared for 3D quick set (software yes, hardware no),new milling spindle in 2022 at 25.584happrox. 60.000 h machine ON, approx. 31.000 h Programm ON in total

x-travel:8500 mmy-travel:2000 mmz-travel:1500 mmrapid travel x/y/z:25 m/mintable-size:10.000 x 1.350 mmtable load:max. 5 t/qmuniversal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/minpower capacity:37 kWmax. torque on the spindle:900 Nminternal coolant system feed:15 barcontrol:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KWdimensions of the machine ca.:12,7 x 5,2 x 4,6 mweight of the machine ca.:35 tuniversal travelling column - universal machining center,orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer)3D touch probe M&H 20.41,dividing wall for 2 table machining,internal air blast,15bar high pressure pump,prepared for HSC milling heads incl. torque support,moveable operator-cabin/panel,chipconveyor,handwheel HR 410,controlled security fence,miscellaneous accessories (angle ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 €: 241.34 €: 50 mm: MK 4 : 350 mm: 93 - 152 - 204 - 298 - 44 U/min: 3 kW: M35 : 480 mm: 755 mm: 2265 mm: 435 kg: 0,1 / 0,18 / 0,24 mm/U: 180 mm: 150 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEGear drive3 aut. feedssliding machine tablesolid drill headtiltable turntablefront wheel for sensitive fine feed(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipment Lcoolant equipment and machine base with T-slots ERBReverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:1000 mmy-travel:1100 mmz-travel:810 mmcontrol:iTNC 530 HEIDENHAINturning speeds:18000 1/mintool taper:HSK 63 table surface area:1.000 x 800 mmmax. swing dia.:1350 mmmax. table load:1.000 kgtool magazin::273 Pos.rapid traverse:60 m/mintotal power requirement:86 kWweight of the machine ca.:18 tdimensions of the machine ca.:4,3 x 6 x 3,4 m5-axis simultan universal machining center,NC-rotary-table (C-axis) and B-axis (milling head),DDT-spindle for high torque (HT - max. 3000 rpm - 291/226Nm) and high speed (HS max. 18.000 rpm - 83/63Nm ),- internal coolant supply 50bar with chipconveyor and paperfilter,el. handwheel,oilmist suction,DCM collision control,Hours on counter:approx. 45.000h "machine on", approx. ca. 2.000h " HT-spindle on", approx. ca. 12.000h " HS-spindle on"NEW SPINDLE IN 09/2025 !

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmcontrol: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: 6100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmcontrol: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 8300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:1400 mmy-travel:1200 mmz-travel:1350 mmcontrol:MSX- 701 Mapps III table surface area:800 x 800 mmrapid traverse:50 m/mintable rotating:360.000 x 0,001 B-Achse °table load:2,0 tnumbers of pallets:2 turning speed range:8000 1/minpower capacity - milling spindle:37 kWno. of tools in the magazine:60 Stücktool taper:HSK-A 100 weight:31 tdimensions:5,9 x 3,48 x 3,68 mEquipment:- Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping- Parts program memory 1 MB - Knoll 70 bar high pressure and filter system- Electrostatic oil dust collector LTA- elect. hand wheel- renishaw probe- abso- scale i X/Y/Z- axis- 5 free m- funktions- 48 extra off sets- dual ballscrews on X/Y/Z- axis

x-travel:560 mmy-travel:560 mmz-travel:660 mmcontrol:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/minspindle drive:25/ 35 kWmax. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mmTool diameter with no neighbouring tools:170 mmtool length - max.:450 mmweight of tools max.:12 kgnumbers of pallets:2 Pallet dimension:400 x 400 mmmax. workpiece diameter:630 mmworkpiece height max.:900 mmtable load:400 kgrapid travel x/y/z:60 m/minFeed x/y/z:60 m/mininternal coolant system feed:70 barweight of the machine ca.:8,5 tdimensions:3200 x 4800 x 2900 mmRenishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar.The machine has just received a new milling spindle.

x-travel:1530 mmy-travel:530 mmz-travel:465 mmside by side, right side fixed table X =:925 mmside by side left side 2 axis table X =:780 mmcontrol:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/minSpindle Torque:120 Nmpower capacity:22 kWFixed Table Dimensions:920 x 540 mmTable load fixed table:2000 kgMax. parts size on fixed table:900 x 500 x 400 mmDiameter of integrated 2-axis rotary table:650 mmTable load rotary table:500 kgB-axis swivel angle:-90°/+110° ° / degMax. parts size on rotary table:600 x 500 x 400 mmMax. Parts size over both tables:1500 x 500 x 400 mminternal coolant system feed:70 bar barweight of the machine ca.:10,5 tdimensions of the machine ca.:3,65 x 2,53 x 2,81 mpendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent con ...

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/minSpindle power:26/20 kWmax. torque on the spindle:340/262 Nmtool taper:HSK-A 100 tool change unit:120 (2x60) Pos.Pallet changer 2x:630 x 630 mmtable load capacity:800 kgweight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyorCNC controlled U-axis enables radial movement of tool for variable spindling diamenter.twin pallet changer 630 x 630 mm6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axisspecial hydraulic pump for fixturecoolant through spindle (10-80bar), one ...