boring mills and machining centers used for sale (3,260)

Control: Manufacture: SIEMENS 840D x-travel: 600 mmy-travel: 560 mmz-travel: 510 mmtable-size: 900 x 560 mmspindle turning speed range: 12000 U/mintool magazin:: 30 weight of the machine ca.: 5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 x-travel: 885 mmy-travel: 800 mmz-travel: 520 mmB-axis (table): +30/-120 °c-axis: 360 °table-size: 600x500 mmtool magazin:: 60 spindle taper ISO: 40 Big Plusspindle turning speed - stepless: 15000 U/mintotal power requirement: 25 kWrapid travel x/y/z: 36 mm/minrapid traverse (slewing motion): 60 U/minrapid traverse feeds rotary table: 100 U/mindimensions of the machine ca.: 3.8x3.6x3.0 mweight of the machine ca.: 12,1 tCoolant through spindle: pressure: 20 bar3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: FANUC 0iM x-travel: 620 mmy-travel: 470 mmz-travel: 400 mmtable-size: 700 x 450 mmspindle turning speed range: 10000 U/mintool magazin:: 20 weight of the machine ca.: 4.5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 16 mmbore depth: 485 mmswing diameter: x mmtable-size: 590x350 mmspindle turning speed range: 230-2300 U/minweight of the machine ca.: 0.4 tTable with digital read outMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 18 mmthroat: 225 mmbore stroke: 110 mmtable-size: 430x345 mmspindle turning speed - stepless: 135-4500 U/minDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 410 mmz-travel: 450 mmb-axis: +110/-110 °spindle turning speed range: -15000 U/minspindle taper: BT Big Plus 40 tool change unit: 40x size of pallet: 2x D-250 mmweight of the machine ca.: 8.6 t5 axes machining centerFANUC G-Tech 30iCoolant through spindle3D measuring probeTool measuring deviceMisc palletsMisc tool holdersMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: FANUC 18i-MB x-travel: 510 mmy-travel: 360 mmz-travel: 300 mmtable surface area: 600 x 360 mmspindle turning speed - stepless: 12000 U/mindimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmmweight of the machine ca.: 2.6 ttool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 276 mmbore stroke: 110 mmtable-size: 315 x 335 mmspindle turning speed - stepless: 50-6300 U/minDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 18 mmthroat: 225 mmbore stroke: 110 mmtable-size: 430x345 mmspindle turning speed - stepless: 135-4500 U/minDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW - Electronics 230V from spare parts warehouse.

NEW - Electronics 230V - from spare parts warehouse.

NEW electronics 230V - TB09050-1 - from spare parts warehouse

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

NEW drill motor with MK3 mount. Performance data according to type plate. The machine comes from a spare parts warehouse.

Key data: 35 mm

New drill motor 230V - Part No. TB02752

Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Machine No.: 306916 Type: U1 Combi Volts: 380 V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 760 kg

Machine No.: 311615 Type: U1 Volt: 380V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 310 kg

Machine No.: 405823 Drilling capacity: D25 mm Projection: 255 mm Drilling depth: 135 mm Tool holder: MK3 Engine power: 0.65 / 0.9 kW Speeds: 8 / 105 – 2900 rpm Table: 500x400 mm Weight: 180 kg

S. No.: 238828

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

For sale used angle head, angle milling head ŠKODA

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.