We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (7)
- Automatic Drillers (3)
- Automatic thread drills (3)
- Battery powered drilling machines (8)
- Bench Type Drilling Machines (57)
- Boring Mills (44)
- Centre Drilling Machines (3)
- CNC Boring Mills (31)
- Co-Ordinate Drilling Machines, Vertical (2)
- Column-Type Drilling Machines (149)
- Contracting Pods Panel Drills (12)
- Core-drilling machines (3)
- Deep Hole Drilling Machines (59)
- Drilling And Milling Machines (22)
- Drilling Centres (2)
- Drilling Machines (50)
- Gang Drilling Machines (5)
- High Performance Drilling Machines (8)
- High Speed Drilling Centres (HSC) (2)
- High Speed Machining Centres (HSC) (9)
- High Speed Radial Borers (17)
- Horizontal Boring And Milling Centres For Cubical Workpieces (5)
- Horizontal Numerically Controlled Machining Centres (52)
- Horizontal Processing Centers (35)
- Indexing Drum Drilling Automatics (1)
- Jig Borers (3)
- Jig boring machines (16)
- Jig Boring Machines, Vertical (2)
- Magnetic drilling machines (12)
- Metal processing centers (1)
- Milling machine centers (17)
- Milling machining centres (3)
- Multi Spindle Bar Maschines (1)
- Multi Spindle Drilling Machines (31)
- Multiway Drilling And Boring Machines (6)
- Numerically Controlled Machining Centres (282)
- Other Drilling And Boring Machines (2)
- Other Machining Centres (15)
- Panel Drills (17)
- Pillar-Type Drilling Machines (27)
- Portal machining centres (5)
- Processing Centers (246)
- Profile processing centres (1)
- Radial Drilling Machines (86)
- Round Turntables (7)
- Special drilling machines (49)
- Special Purpose Drilling And Boring Machines (1)
- Special Purpose Machining Centres (1)
- Standing Drills (2)
- Table Drills (55)
- Tapping Machines (25)
- Tool machining centres (1)
- Transmission drills (3)
- Turning-machining centres (9)
- Universal processing centres (68)
- Vertical Boring And Milling Centres For Cubical Workpieces (2)
- Vertical Numerically Controlled Machining Centres (111)
- Vertical Processing Centers (238)
- Vices For Machines (4)
- more
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABENE (1)
- ABM (8)
- ACCUWAY (1)
- Aciera (3)
- ADAM (1)
- AEG (3)
- AERRE (1)
- AES (1)
- AES GROUP (1)
- AGEMA (1)
- AGIE (1)
- AGIE CHARMILLES (5)
- AGW BOCKLENBERG (1)
- Akira Seiki (2)
- ALBERTI (1)
- ALBRECHT (1)
- ALKETT (1)
- ALLOY WHEEL M... (1)
- Alzmetall (71)
- AMADA (1)
- ANAYAK (3)
- ANGER (5)
- APRA NET (1)
- ARBOGA (8)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- Artykuly Techniczne (6)
- ASDORF (1)
- AUDAX (1)
- AUERBACH (1)
- AVIA (1)
- AWEA (6)
- AXA (19)
- AXON LITZ (1)
- BACCI (1)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECK (1)
- BECKHOFF (1)
- BERGMANN (1)
- Bergonzi (2)
- Bernardo (16)
- BERNHARD STEINEL (1)
- BERNSTAIN (1)
- BEYER (2)
- BFW (3)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIESSE (1)
- Bilz (3)
- Bimak (2)
- Bimatec Soraluce (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (6)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (3)
- BORNEMANN (1)
- Borsig (2)
- BOSTOMATIC (1)
- BREDA (1)
- BREDA / GI-EFFE-DI (1)
- BRIDGEPORT (11)
- BRIDGEPORT - HARD... (1)
- BRIDGEPORT HARDINGE (1)
- BROTHER (10)
- BUCKUHLY (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER BW (1)
- BüHRER (1)
- C.B.FERRARI (1)
- Caber (2)
- Castel (3)
- CB FERRARI (1)
- CERUTI (1)
- CHARMILLES (3)
- CHEMNITZER MASCHINENBAU (1)
- CHEMNITZER MB (1)
- Chiron (53)
- CINCINATI MILACRON (1)
- CINCINNATI (9)
- CINCINNATI MILACRON (2)
- CMA (6)
- CME (1)
- CNC-STEP (7)
- COBALM (1)
- COILTEC (1)
- COLGAR (3)
- Collet (4)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 101)
ABA 2
ABB 1
ABENE 1
ABM 8
ACCUWAY 1
Aciera 3
ADAM 1
AEG 3
AERRE 1
AES 1
AGEMA 1
AGIE 1
ALBERTI 1
ALBRECHT 1
ALKETT 1
Alzmetall 71
AMADA 1
ANAYAK 3
ANGER 5
APRA NET 1
ARBOGA 8
ASDORF 1
AUDAX 1
AUERBACH 1
AVIA 1
AWEA 6
AXA 19
BACCI 1
BATLIBOI 1
BECK 1
BECKHOFF 1
BERGMANN 1
Bergonzi 2
Bernardo 16
BEYER 2
BFW 3
Bierrebi 3
BIESSE 1
Bilz 3
Bimak 2
BIZERBA 1
BLANSKO 1
BMW 2
Borsig 2
BREDA 1
BRIDGEPORT 11
BROTHER 10
BUCKUHLY 1
BUMOTEC 1
BüHRER 1
Caber 2
Castel 3
CERUTI 1
Chiron 53
CMA 6
CME 1
CNC-STEP 7
COBALM 1
COILTEC 1
COLGAR 3
Collet 4
CONDAIR 1
CORDIA 6
CORNAC 1
Csepel 3
CYBERNET 1
DAEWOO 1
DAHLIH 1
DART 1
DECKEL 10
DECKEL MAHO 84
Deckel-MAHO 17
DEFUM 5
DEGEN 1
Depo 2
DEUMA 1
DIHART 1
DIVERS 1
diverse 3
DIXI 1
DKF 1
DMC 3
DMG 47
DMG MORI 59
DMG-Mori 10
DMU 1
Donau 16
DOOSAN 21
DORMER 1
DUGARD 1
DUMETA 6
EBERLEI 1
Einhell 2
Elan 2
ELHA 5
ELMAG 6
ELU 1
elumatec 10
EMA 1
EMAG 1
EMCO 6
EMMEGI 2
ENSHU 3
ERD 2
Erlo 15
EUMACH 1
EWAG 2
FADAL 6
FAMU 1
Famup 5
FANUC 10
FEELER 2
FEHLMANN 12
FEIN 1
FELLER 1
FERVI 1
FIDIA 3
FIRST 2
FLOTT 47
FORMAT 2
FPT 4
FRORIEP 5
FSA 1
FUJITSU 1
GARANT 1
GEORG 1
GERARDI 1
GIANA 1
GILLARDON 21
GIRARDS 1
GOSMETA 1
GOTHA 1
GROB 1
GSP 1
Gühring 3
GüNTHER 1
HAAS 34
HACO 1
HAEFNER 1
Hardinge 2
HARTFORD 10
Hauser 3
HBM 16
HECKERT 6
HEDELIUS 25
HEGNER 1
HELLER 17
Hermle 27
HETTNER 1
HIMMEL 2
HKS 2
HOLZMANN 2
HTT 1
HURCO 39
HURON 6
HUVEMA 5
HWACHEON 7
HYUNDAI 3
IBARMIA 8
IMATEC 1
IMF 4
IMSA 2
INDEX 1
INNSE 1
approved
dealer
dealer
Inv. Num. : 8987 Type: WD 130 Producer: TOS Generated: Parameters: Maximum spindle speed: 2000 1/min X-axis travel: 6400 mm Y-axis travel: 2500 mm Z-axis travel: 430 mm Without a table.
approved
dealer
dealer
Inv. Num. : 8973 Type: MCFV 1680 Producer: ZPS Created: 2010 Parameters: Work table length: 1800 mm Work table width: 780 mm X-axis travel: 1650 mm Y-axis travel: 810 mm Travel Z axis: 810 mm
approved
dealer
dealer
Inv. Num. : 8972 Type: WD 130 A Producer: TOS Created: 1996 Parameters: Work table length: 2200 mm Work table width: 2200 mm X-axis travel: 4700 mm Y-axis travel: 1755 mm Travel distances Z-axis: 1100 mm Machine weight: 27 t
approved
dealer
dealer
Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Siemens Sinumerick 840D Total hours: 12,058 h Operating hours: 5,039 h Worktable length: 1200 mm Worktable width: 5 Spindle rotation: 8000 1/min Number of axes: 3 X-axis travel: 1035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:3,200 mm Y-axis travel:1,400 mm Z-axis travel:900 mm X-axis rapid traverse:16 m/min Y-axis rapid traverse:20 m/min Rapid traverse: m/min Y-axis feed rate:10 m/min Z-axis feed rate:10 m/min Nominal (apparent) power:50 kVA Controller manufacturer:Fanuc α 30/3000i 7.0 Workpiece length (max.):4,000 mm Workpiece width (max.): max. 000 kg Total height: 4,500 mm Total length: 8,130 mm Total width: 4,150 mm Table width: 1,200 mm Table length: 3,200 mm Table load: 8,000 kg Total weight: 17,000 kg Maximum spindle speed: 8,000 rpm Diameter: 50 mm Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Equipment: documentation / manual, chip conveyor, infinitely adjustable speed
approved
dealer
dealer
Key data: 762 mm, 508 mm, 508 mm
Inv. Num. : 8969 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Switch-on hours: 8496 h Hours: 6185 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm
Key data: 650 mm, 600 mm, 500 mm
Control Heidenhain ... TNC 530 Clamping table surface ... 630mm Axis X ... 650mm Axis Y ... 600mm Axis Z ... 500mm Spindle speed... 0-18000 rpm controlled axes ... 5 IKZ ... 80bar Spindle holder ... HSK-A63. Magazine spaces ... 32 Axis A ... +30/-115° Axis C ... 0,001° Machine weight ... 9500kg The machine is in good condition, possible to test under power.
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg
The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation
approved
dealer
dealer
Inv. Num. : 8930 Type: DMC 635 V eco Producer: DMG Created: 2008 Parameters: Control system: Siemens 810D Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 4500 kg
approved
dealer
dealer
Inv. Num. : 8929 Type: DMC 635 V Producer: DMG Created: 2007 Parameters: Control system: Heidenhain iTNC 530 Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 4500 kg
The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.
The machine is in good technical condition, testing is possible by prior arrangement.
approved
dealer
dealer
Inv. Num. : 8906 Type: MV 154 APC E 12B Producer: Quaser Created: 2012 Parameters: Control system: FANUC Oi-MD Work table length: 800 mm Work table width: 500 mm Maximum table load (even): 250 kg Spindle drive power: 11/18.5 kW Minimum vertical spindle speed: 50 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 700 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Cone: ISO 40 Machine height: 3080 mm Machine length: 4250 mm Machine width: 2850 mm Machine weight: 8500 kg Equipment: Chip conveyor Pallet Changer Workpiece Probe Tool probe
approved
dealer
dealer
Inv. Num. : 8902 Type: Vesta 1000 12K Producer: Hwacheon Created: 2016 Parameters: Control System: FANUC Series Oi-MF Hours: 15976 h Work table length: 1100 mm Work table width: 502 mm Spindle drive power: 11 kW Maximum spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 550 mm Travel Z axis: 500 mm Cone: BT40 Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool diameter: 80/150 mm Rapid traverse X/Y/Z: 36/36/30 m/min Machine height: 2670 mm Machine length: 3335 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool probe Workpiece Probe 4th axis TSUDAKOMA
approved
dealer
dealer
Inv. Num. : 8881 Type: PRO-1000 A Producer: Hartford Generated: Parameters: Control system: FANUC Work table length: 1150 mm Work table width: 600 mm Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Machine weight: 6000 kg Equipment: Tools
approved
dealer
dealer
Inv. Num. : 8880 Type: MCV 500 QUICK Producer: MAS Created: 2003 Parameters: Control System: FANUC Series 2ti-MB Work table length: 800 mm Work table width: 500 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2550 mm Machine length: 2085 mm Machine width: 1900 mm Machine weight: 3800 kg
The machine is in good technical condition, after prior agreement it is possible to test it. 3 axis machining center, X-axis repaired, bearing replacement, Y-axis bearing replacement. New Y-axis measurement
The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.
The machine is in good technical condition, after prior agreement possible to test. 2 workstation machining center. Workstation 1: 3 axes. Workstation 2: 5 axes. Magazine: 22 tools. Heidenhein control system. Fully functional. type: DBZ X: 2 x 750 (+ 4/5 axis) Y: 500 Z: 600 Worktable 2 × (1000 × 500 mm), 3 T-slots Tool clamping SK 40 DIN 69871 A Renishaw probe adapter on both workstations
The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg
The machine is in good technical condition, testing is possible by prior arrangement.
approved
dealer
dealer
Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul
approved
dealer
dealer
Inv. Num. : 8870 Type: VTC-200B Producer: MAZAK Created: 1999 Parameters: Control system: Mazatrol PC-Fusion CNC 640 M Work table length: 2820 mm Work table width: 655 mm Maximum table load (uniform): 800 kg X-axis travel: 1120 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 6000 kg Equipment: Tool probe Workpiece Probe IKZ Chip conveyor
The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.
