lathes used for sale (2,968)

turning diameter: 600 mmswing diameter: 680 mmturning height: 600 mmz-axis: 500 mmx-axis: 560 mmdrive of main spindle: 65/80 kWmain spindle speeds:: 2800 workpiece tool changer: 12 Plätzefeeds z-axis: 0,01-30.000 mm/minfeeds x-axis: 0,01-45.000 mm/minchuck: Rota NCR 630 mmcoolant: voltage: 400 Vfrequency: 50 Hzcontrol: Siemens 840 D pl chip conveyor: kWtotal power requirement: 140 Aweight of the machine ca.: 18 tdimensions of the machine ca.: 6,5 x 3,8 x 4,20 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 390 mmturning length: 2250 mmcontrol: Sinumerik 840D swing diameter: 610 mmcross movement. (x-axis): 605 mmlongitudinal traverse (z-axis): 1.870 mmy-axis: 210 mmb-axis: 240 °Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mmLongitudinal travel (Z3): 1.840 mmmain spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: max 82 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 82 mmDiameter in front bearing: 180 mmCounter spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: 92 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 104 mmDiameter in front bearing: 180 mmMain spindle drives left and right: - power requirement: 45/47 kWspeed area: 20 - 3.200 1/minBuckling speed: 650 1/mintorque: 650/ 1.080 NmC-axis speed: 3.200 1/minTorque C-axis: 660 1/minPartial accuracy C-axis: 0,025 ° ...

turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 96240 €: 1818.94 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 MK: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachin ...

The range of application of this machine is in the single part and Small batch production from the simplest to the most complicated contours. It is characterized by: --> Ease of use <-- - All controls are ergonomically convenient and outside the chip area - The slides can be moved with handwheels, in addition to the Travel distance per handwheel rotation can be changed by the operator - Feed rate and speed or cutting speed can be adjusted during the editing can be changed using the correction switches. --> Precision <-- - Bed slide guides with adjustable wedge strips guarantee a long Long-term accuracy --> Workspace <-- - Wide speed range at high power, with and without gearbox - High feed forces allow the use of modern tool systems - Large rapid traverses minimize non-productive times. - 1x Tailstock - 1x bezel - Jaws for lathe chuck Auction-ID: A1-48483-112

turning diameter: 590 mmturning length: 1100 mmcontrol: Fanuc turning diameter over bed: 800 mmtotal power requirement: --- kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine body 1 Basic machine: VLC 200 GT (Siemens) Serial Number: 114718 Hours read: 6512 Additional equipment and expansion stages 18 kW main spindle, 3000 1/min Tool carrier unit 12 × D40 mm DIN 69880 2 motor grinding spindles type 140/45.000 Oil air lubrication device for max. 2 grinding spindles Dressing unit with sensors Workpiece transport system O-version Pallet fixing device 21 workpiece carriers for O-band Blowing off the workpiece and clamping device Hinged belt chip conveyor Emulsion mist extraction Coolant supply 8 bar (100 l) Paper belt filter with cooling unit Magnetic pre-separator Interface Paper Belt Filter Workpiece Measurement PROFINET interface Siemens HT8 hand-operated handset with handwheel Connection kit Siemens HTx Machine body 2 Basic machine: VLC 200 GT (Siemens) Serial Number: 114719 Hours read: 6179 Additional equipment and expansion stages 18 kW main spin ...

Production 1 CNC lathe Maier MLK32 D-5 2009 Control, Fabr. Maier/Fanuc, separate cooling /Lubricant preparation, Fabr. Knoll, type KF110, Belt filter, CO2 extinguishing system, Fabr. Kraft + Bauer, Bar Feeder, Fabr. FMB, Type Turbo 3-36, Ser.-Nr. 261209, L 4,200 mm, Accessories: Bar table, Sheet Steel Cabinet Control GE Fanuc 7 axes (X1,Z1,Y1,C1 X2,Z2,C2) Auction-ID: A7-48452-4

General description CNC lathe WEILER 120 CNC, designed for precision turning operations in toolroom and small batch production environments. Compact and robust German-built machine suitable for prototyping and workshop use. Technical details Manufacturer: Weiler (Germany) Model: 120 CNC Type: CNC / teach-in lathe Control: Siemens SINUMERIK System 3 Tooling system: Multifix quick-change toolpost Working area: Enclosed with splash guard Cooling: Coolant hoses visible Operation: CNC with manual access doors and chip tray Control panel: Screen, keypad, feed/speed controls, emergency stop Application: Precision turning, prototyping, and small series production Equipment - Siemens SINUMERIK System 3 control - Multifix quick-change toolpost - Coolant system - Enclosed working area - Chip tray Condition and remarks Used machine, untested. Shows signs of wear consistent with age but appears co ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 €: 897.13 €: 500 mm: 1500 mm: 250 mm: 80 mm: 300 mm: 400 mm: 8 : 80 MK: 21 : 20-2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3100 mm: 1250 mm: 1400 mm: 2820 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53 ...

turning diameter over bed: 460 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 600 mmturning speeds: 22 - 1500 U/mincentre height: 230 mmspindle bore: mmtotal power requirement: 6,5 KWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 mCentre lathe- Forkardt F200 3-jaw chuck- Multifix quick-change tool post- Steady rest- Chip tray- Tailstock centreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of build: 1998; Operating hours: 17632; Toolholder type: VDI 20; Live tooling: yes; X-axis travel: 160mm; Z-axis travel: 350mm; Auction-ID: A1-48232-22

Operating hours: 5774; Distance between centers: 975mm; Mill spindel speed: 0-7000 rpm; Spindel toolholder type: C4 Axis displacement X/Z - X2/Z2: 400/700 - 205/750mm; Axis displacement Y-axis: +/- 50mm; Amount of tool places: 48; Auction-ID: A1-48232-19

Maximum turning diameter : 140mm, turning length : 233,5mm, spindle bore: 31mm, 3-jaw chuck ø95mm. Equipped with Spandau coolant system and Vogel central lubrication. Auction-ID: A1-48232-20

Approximate size 800 × 2250 × 1700 mm equipped with DiTron D602V control Bar Passage: 65 mm Auction-ID: A7-48410-882

Operating hours: 14618; Tool shaft type: VDI 30; X-axis travel: 250mm; Z-axis travel: 635mm; Auction-ID: A1-48232-21

control: FANUC 18i TB turning diameter: 280 mmturning length: 400 mmc-axis: indexing: 0.001 °turning speeds: -6000 U/mintool taper: DIN ASA A2-5 Top turret tool hodler:: 12 rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 30 m/minOverall size: 5000 x 2000 x 2600 mmweight of the machine ca.: 6300 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 0i TC turning diameter: 520 mmturning length: 1090 mmturning speeds: -3500 U/minTop turret tool hodler:: 12 rapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 3000 x 1800 x 2000 mmweight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 21i TB turning diameter: 355 mmturning length: 1330 mmc-axis: indexing: 0.001 °turning speeds: -2800 U/mintool taper: BMT 65 Top turret tool hodler:: 12 rapid traverse X-axis: 16 m/minrapid traverse Z-axis: 24 m/minOverall size: 4000 x 2000 x 2100 mmweight of the machine ca.: 6700 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Manufacturer: FMS Drehtechnik Schaffhausen AG, Switzerland Type: NDL-40/130 Machine Type: CNC Lathe Year of Make: 2003 Control: Siemens SINUMERIK Machine No.: 16212-51 Turning length: 1500 mm Turning diameter: 400 mm Swing diameter over bed: 630 mm Swing diameter over face slide: 410 mm Speed range: 40 – 3200 rpm Main drive: 68 kW Spindle bore: 90 mm Hydr. Clamping Cylinder Passage: 86 mm Tailstock: MK5, quill stroke 120 mm Rapid traverse: 16,000 mm/min Coolant tank: 400 l Dimensions (L x W x H): approx. 5350 x 2270 x 2670 mm Machine weight: approx. 14,000 kg Configuration Siemens SINUMERIK CNC control Heidenhain Digital Display Hydraulic clamping system Tool turret Coolant system Chip conveyor Hydraulic power unit Various clamping devices and tool holders Extensive technical documentation available Machine dismantled in the production environment Included : Manufact ...

control: GE Fanuc Series 21i-T Distance between centres: 5000 mmcenter bore: 425 swing over bed: 850 mmbed width: 425 mmrapid feed: 10000 mm/minworking feed: 7000 mm/minmain spindle bore: 85 mmMain spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/minSpindle power: 11 KWtailstock quill diameter: 96 mmtailstock travel: 215 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 7.300x1.700x1.900 mSupport Guides 2Swing over cross carriage 560 mm.Automatic ranges 2Turret type AutomaticTurret positions 8Hydraulic tailstock quill stroke INCLUDEDTailstock taper MORSE 63 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED4 support steady rest Ø 450 mm. INCLUDED3 support steady rest Ø 250 mm INCLUDEDChuck protection INCLUDEDComplete rear protection INCLUDEDDual handwheel for carriage control INCLUDEDFoot pedals for hydraulic chuck opera ...

turning diameter: 370 mmturning length: 712 mmcontrol: Siemens Sinumerik 828D x-axis: 255 mmz-axis: 790 mmtotal power requirement: kWweight of the machine ca.: 3100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 640 mmturning length: 2.000 mmcontrol: 840D incl. Weiler SL1 Siemenscentre height: 320 mmswing diameter over face slide: 405 mmradial face slide travel: 380 mmtravel upper slide: 130 mmbed width: 380 mmturning tool - shaft cross cut: 32 x 25 mmMain spindle:: turning speed range - main spindle: 0 - 2.500 min/-1transmission ratio: 2 transmission ratio 1: 0 - 800 min/-1transmission ratio 2: 0 - 2.500 min/-1power capacity - main spindel: 20,5 / 17 kWmax. Torque: 1.400 Nmspindle head: Gr. 8 DIN 55027spindle diameter in front bearing: 120 mmspindle bore: 83 mmtaper bore: 90 metrischfeeds:: power feed longitudinal: 10.000 Npower feed coss: 9.000 Nfeed range: 0 - 20 mm/-1rapid traverse: 10/7 | 5/3,5 m/minthreading:: metric: 0,1 - 400 mminch: 1/4 - 56 G/1module: 0,125 - 28 mm . IITailstock:: dia. of quill: 100 mmquill stroke: 200 mmcapture: MK 5 total power requir ...

Diameter of the table: 3000 mmturning diameter: Max. 5500 mmcolumn travel: 1000 mmpassage: Querbalken 1000 max. mmPassage height: Vertikalschlitten 1854 ma mmtable turning speeds: 82 U/mintable load: max. 25 tweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of  ...

chuck diameter: 210 mmmax. swing diameter over bed: 500 mmswing diameter over slide rest: 290 mmturning diameter: 200 mmcentre distance: 700 mmturning length: 500 mmtravel -y axis: 80 (+/-40) mmtravel -x axis: 190 mmtravel -z axis: 525 mmspindle bearing diameter: 100 mmbar capacity: 65 mmspindle bore: 73 mmspindle turning speed range: 6000 U/minturret (x-stations): 12 work piece power: 4,18 kWspeeds of tool: 5000 U/min: VDI 30 control: Siermens 840D total power requirement: 20 kWweight of the machine ca.: 4,3 tdimensions of the machine ca.: TBH 2,2 x 4,5 x 1,82 mVery well-maintained machine from a training workshop that has closed down.Power-on hours: 14,944 h. Spindle hours: 2,233 h.Includes current measurement report (available upon request)Includes Y-axisIncludes C-axisIncludes approx. 10 tool holders (including 2 driven units: EWS axial/radial)Includes SMW 3-jaw chuckIncludes tailsto ...

turning diameter: 680 mmturning length: 600-635 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 6500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mmturning length: 500 mmcontrol: OSP 7000L total power requirement: kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 1000 mmturning diameter over bed: 420 mmturning diameter over bed slide: 235 turning length: 1000 mmspindle taper: DIN 55027 Gr. 6control: MANUALPlus 4110 spindle bore: 51 mmturning speed range: 3 - 3000 U/minfeed:: 5.000/10.000 mm / mindrive capacity - spindle motor: 11 kWtaper in tailstock-quill: MK 4 dia. of quill: 70 mmquill stroke: 110 mmcoolant: ja/yes voltage: 400 VNumber of working hours: 6.908 hweight of the machine ca.: 3 tdimensions of the machine ca.: 3,4 x 2 x 2,2 mBOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006-Control system: Heidenhain ManualPlus 4110-11 kW AC main drive with 2-stage gearbox-Work area cover with chip guard door-Control panel mounted on the support, moves with the machine-Holding brake-Programmable cycles-4-position quick-change turret-Size 2 tool holder on fixed base-With 1 WD ‘/25’ tool holder-Tailstock-Rapid traverse ...

Maximum turning diameter: 2800 mmMaximum swing diameter: 3000 mmdiameter of spindle flange: 1100 mmcontrol: Siemens 840 D sl Table rpm: 230 1/minMaximum speed of driven tools: 6000 1/minx-travel: 2700 mmz-travel: 1000 mmFeed - X: 24 m/minfeed capacity - x: 22 kNtool taper: CAPTO C8 total power requirement: 200 kVAdimensions of the machine ca.: 10,4 x 6.3 x 5,7 mweight of the machine ca.: 120 tEquipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions- 2 x chip conveyors- Coolant system, 6 bar- High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply- Hydraulic unit - Automatic door - Electric handwheel - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.