lathes used for sale (2,968)

Machine is equipped with: - chip conveyor - sub spindle 6000rpm - tool setter - live tooling - part catcher - bar feeder - pallet with parts and tooling Auction-ID: A1-48522-4

Specifications: Control: Fanuc 0i-TD Hours: 2333 Capacity: - Max. turning diameter: 300mm - Max. turning length: 300mm Spindle: - Chuck size: 170mm - Spindle speed: 6000rpm - Spindle bore: 56mm - Bar capacity: 45mm - Motor power: 11/7,5kW - Bearing size: 90mm Turret: - Positions on turret: 12 - Tool size: AD: 25mm x 40mm Feedrates: - X-axis: 36m/min - Z-axis: 36m/min Machine is equipped with: - 8 static tools - Manuals - Chip conveyor - Tool pre-setter - Manual Guide i - Embedded Ethenet Interface Auction-ID: A1-48522-8

Turning diameter over support: 300mm. Equipped with \"Mitutoyo\" KA-200 digital X,Y-axis readout. Includes, fixed and guided glasses, tool holders, chuck exchange jaws and 2-door steel cabinet with various machine accessories Auction-ID: A1-48414-22

Machine is equipped with: - chip conveyor - 525mm chuck - EZ Guide - tool pre-setter - tailstock Inozet bridge not included Auction-ID: A1-48522-13

: neu : Bulgarien : 121770 €: 2301.45 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 turning length4.000 mm € 130410,00 turning length5.000 mm € 141610,00 turning length6.000 ...

Fanuc 18i-T, live tooling, sub-spindle Max turning diameter: 390 mm Recommended turning diameter: 170 mm Max bar capacity: 65 mm X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° Chuck size: 210 mm Spindle nose: ASA A2-6 Spindle bore: 76 mm Spindle motor power: 15/11 kW Rapid traverse X/Z: 20/25 m/min Turret positions: 12 Bar capacity: 65 mm Coolant pump motor: 0.24 kW Electrical requirement: 25 kVA Machine height: 1740 mm Machine weight: 4240 kg Control system: FANUC FS18T-C / FS16T-C Auction-ID: A7-48385-27

turning diameter over bed: 340 mmturning diameter over slide rest: 260 mmturning length: 700 mmspindle bore: 48 mmspindle turning speed range: 25 - 2000 U/minspindle nose: DIN 55027 KK 5voltage: 380 Volttotal power requirement: 2,2/4,4 kWweight of the machine ca.: 1000 kg.dimensions of the machine ca.: 1.800 x 700 x 1.500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmturning speed range: 24 - 2800 U/minspindle bore: 38,0 mmcentre height: 155 mmtool adaptor: DIN 55022 total power requirement: 3,0 kWweight of the machine ca.: 850 kg.dimensions of the machine ca.: 1,9 x 0,7 Höhe: 1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Herrez Sculfort Model No.: MaxiCap Numerical control: Fagor 8025-TGI Control: Fagor 8025 12-position turret Hydraulic Plate Hydraulic tailstock Diameter on bed: 500 mm Diameter on trolley: 400 mm Distance between points: 1200 mm original machine (expandable to 2000 mm) Spindle speed: 0 - 1156 rpm CNC lathe supplied with hydraulic unit, 3-jaw self-centering plate, tool holder, clamping blocks and various accessories visible in the photographs. The machine has a work area protected by enclosure and Fagor CNC control. Includes: Self-centering 3-jaw plate Hydraulic unit Tool holder and lashing block set Accessories and tooling shown in the images Sold in the condition it is in. Auction-ID: A7-48385-32

FANUC CNC Lathe Serial Number: S2-1342 Power: 13 kW CNC Control: FANUC 0i-TA Spindle speed: up to 4500 rpm (max. 6000 rpm) 12-position turret Turning diameter: 180 mm Z-axis travel: 300 mm 160 mm hydraulic plate Bar pitch: 52 mm Coolant capacity: 40 L Suitable for the production of small and medium-sized parts Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-48385-41

OKUMA CNC Lathe Serial Number: 131693 Power: 45 kW Control: OKUMA OSP-P200L 2 axes + C Diameter on bed: 620 mm Diameter on trolley: 420 mm Distance between points: 1270 mm Chainring: 400 mm Bar capacity: 80 mm Spindle speed: 35–3500 rpm 12-position motorized turret type VDI Fast feeds: X 20 m/min, Z 25 m/min MT5 tailstock Includes chip extractor and presetting Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-48385-40

Travis TR-2 CNC lathe manufactured in 2006. Equipped with Fagor 8055T CNC control, hydraulic plate and 8-position tool turret. Technical characteristics: • Distance between points: 1,850 mm • Flip on bed: 630 mm • Trolley tipping: 400 mm • Maximum spindle speed: 2,500 rpm • 300 mm hydraulic chuck • 8-position turret • Tailstock included • Centralized automatic lubrication system The machine is supplied with various tool holders, turning tools and accessories visible in the photographs. Suitable for precision turning work and general metal machining. Used status. Sold in the condition it is in. Auction-ID: A7-48385-56

: neu : Bulgarien : 26210 €: 500.61 €: 325 mm: 750 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 2 : 85-405, 470-2200 U/Min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 0.1 - 1.75 : 70 - 4 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 53250 €: 1006.43 €: 500 mm: 1500 mm: 250 mm: 75 mm: 300 mm: 400 mm: 8 : 80 MK: 3 : 25-100, 100-400, 500-2000 U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60-1/4 Gänge/: 0.125 - 30 : 240-1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3100 mm: 1250 mm: 1400 mm: 2800 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 51870,00 tur ...

Included:Three-jaw chuck Turning diameter over support: 160 mmWeight: approx. 1000 kgNote: without emergency stop function. Auction-ID: A7-48614-22

Center width: approx. 500 mmCenter height above bed: approx. 120 mmCenter height over longitudinal support: approx. 75 mmCenter height over cross support: approx. 50 mmincl. Multifix base holderBar passage: approx. 20 mmwith stock of other jaw chucks, turning steels, clamping jaws and lathe steel holders Auction-ID: A7-48624-9

turning diameter over bed: 670 mmturning diameter over slide rest: 420 mmturning length: 2200 mmturning diameter in the gap: mmturning speeds: 7,1 - 1400 U/mincentre height: 340 mmspindle bore: 130 mmtotal power requirement: 22,0 KWweight of the machine ca.: 5,2 tdimensions of the machine ca.: 4,75 x 1,8 x 1,7 mCentre lathe - Forkardt F400 3-jaw chuck- Feed on top slide- Coolant system- Multifix tool post- 4 Multifix tool holders- Rapid traverse- Steady rest- Machine light- Live centre- 2 chip trays- Chip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mmturning diameter over slide rest: 320 mmturning length: 1500 mmturning diameter in the gap: mmturning speeds: 33 - 1500 U/mincentre height: 250 mmspindle bore: mmtotal power requirement: 5,5 KWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Control: SIEMENS 840 DNumber of axes: 2Max. turning diameter: 420 mmMax. turning length: 1000 mmX/Z axis strokes: 200 / 1000 mmSpindle bore: 82 mmSpindle speed: 0 – 3,000 rpmSpindle motor power: 14.5 kWTurret: VDI 40, 12 stationsChuck: Autoblok Ø 250 mmTailstock: Chip Conveyor: PresentRemarks: Machine in good working order.Weight (kg): approx. 5500Year & Manufacturer: 2001 – MENTI Auction-ID: A1-48609-254

Maximum passage diameter: 310 mm Maximum turning diameter: 190 mm Standard turning diameter: 170 mm Maximum turning length: 235 mm Bar passage: 65 mm Spindle speed: 50 to 5,000 rpm Spindle power: 22 kW / 18.5 kW Spindle nose: JIS A2-6 Spindle Bore: 73 mm Axis C: Indexation 0.001° Turrets: 2 independent turrets Tool capacity: 32 positions (16 per turret) Motorized tools: 16 positions per turret Motorized Tool Speed: 6,000 RPM Power with motorized tools: 5.5 / 2.2 kW Indexing time: 0.2 s X-axis: 140 mm Y-axis: ± 50 mm Z-axis: 700 / 690 mm B-axis: 775 mm Fast Advances: 18 m/min CNC Control: MSX 501 MAPPS II (Fanuc 30i) Weight: 6,600 kg Dimensions: 3,700 x 2,100 x 2,000 mm Equipment: Bar feeder included Auction-ID: A1-48609-15

Technical data Drive power: 10 kW Maximum spindle speed: 1,400 rpm Tip height: 270 mm Turning diameter over bed: 540 mm Turning diameter over support: approx. 320 mm Turning diameter in the bed offset: approx. 750 mm Center width: 1,000 mm Spindle bore: 62 mm Thread Types: Metric, Inch, Modulus, and Diametrical Pitch (DP) Transmission: quick-change gearbox for feeds and threads Equipment: four-jaw chuck, tailstock, top slide, hardened and ground bed guides Scope of delivery: Tool cabinet with contents Tool cabinet dimensions: 750 x 550 x 1700 mm Other tools Content may vary Auction-ID: A1-48591-6

Manufacturer: DMG GILDEMEISTERYear: 2008Type: CNC lathe with motorized tools with C and Y axesNumerical control: Heidenhain iT PlusMax. turning diameter: 400 mmMax. turning length: 600 mmDistance between tips: 615 mmMain spindle: 20–6,000 rpm – 16 kW – max. torque 155 NmBar capacity: Ø 52 mm – spindle bore 61 mmC-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW)Strokes: X 160 mm / Z 450 mm / Y ±32 mmFast feeds: X 60 m/min – Z 45 m/minAttachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic systemDimensions (mm): 8000 × 3000 × 2700Weight (kg): approx. 4500Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-48609-212

Incl. HEIDENHAIN PGM 246 112 05 digital display, FORKARDT F250 3-jaw chuck, 6 quick couplers WITHOUT turning chisel Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-79

WITHOUT tools and clamping devices Gearbox defective, the small feed gears can no longer be shifted Output via goods elevator Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-19

VDF Boehninger 640 Universal Lathe Type: Universal lathe Manufacturer: VDF Type: BOEHRINGER 640 Turning length: 1000 mm Turning Ø: 640 mm Spindle boring Ø: 385 mm Machine weight: 3500 kg Dimensions (L x W x H): approx. 3650 x 1100 x 1300 mm Distance between points: 1500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-16

Capabilities: Maximum turning diameter: 420 mm (standard 290 mm) Maximum turning length (Z-axis): 635 mm Bar passage: 65 mm Spindle Bore: 79 mm Spindle: Rotational speed: 25 to 5,000 rpm Power: 21 kW (100%) / 28 kW (40%) 3-jaw hydraulic chuck (Ø approx. 200–250 mm) Turret & tooling: Sauter Turret VDI 30 (DIN 69880) Capacity: 12 stations Motorized substations C-axis (pin indexing) CNC Control: Heidenhain Turn Plus Electrical data: Power supply: 400 V / 3~ / 50 Hz Installed effective power: 44 kVA Current rating: 64 A Protection: 80 A Auxiliary voltage: 230 V Control voltage: 24 V DC Auction-ID: A1-48609-262

CNC lathe for metal part turning operations. Numerical control: Fanuc 18TAxes: 3-axisTurret: 12 fixed positions + 6 rotating positionsChuck: Ø 200 mm (possibility of mounting clamps in the spindle)Distance between tips: 350 mmSpindle speed: 4,000 rpmSpindle passage: 51 mm Auction-ID: A1-48609-249

Manufacturer: YAMAZAKI MAZAKYear: 1994Type: CNC latheNumerical control: Mazatrol T32-2Axes: 2 axes (X, Z)Max. diameter above the bed: Ø 560 mmMax. turning diameter: Ø 410 mmMax. turning length: 1500 mmSpindle: 35–3500 rpm – main motor 22 kW – spindle nose A2-8 – bore 76 mmTurret: 12 positionsEquipment: Programmable tailstock, complete enclosureWeight: approx. 6900 kgOrigin: JapanCondition: used Auction-ID: A1-48609-230

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmCounter-spindle power: 3.7 / 5.5 kWCounter-spindle bar passage: 42 mmC-axis: 0.001°Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500Serial No.: 1105-02957 Auction-ID: A1-48609-238

GRAZIANO SAG210 Centre Lathe Type: Centre lathe Manufacturer: GRAZIANO Model: SAG210 Year of manufacture: 1995 Maximum speed: 1800 rpm Electric connection: 380 V Approx. machine weight: 2850 kg Approx. dimensions (L x W x H): 3200 x 1600 x 1500 mm Swing over bed: 500 mm Swing over carriage: 280 mm Distance between centers: 1500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-37