lathes used for sale (2,968)

number of spindles:8

Lathe with 4 tools only for 3-cylinder crank shaft

turning diameter: 100 mmturning length: 100 mmMain Spindle:: spindle motor: 7,5 / 11 kWspindle passage: 42 mmcollet diameter: DIN 173E (A5) spindle turning speed range: 6000 U/minrapid traverse: 30 m/mintravel x / y / z: 300 / 770 / 250 mm2nd Spindle:: spindle motor: 2,2 / 3,75 kWspindle passage: 30 mmdia. of draw-in collets: DIN 173E (A5) mmspindle turning speed range: 6000 U/minrapid traverse: 30 m/mintravel x / y / z: 900 / 770 / 300 mmcontrol: Mitsubishi M830 tool taper: ER 20 total power requirement: kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,8 x 2,2 x 2 mSimultaneous machining on the main and counter spindles- Mitsubishi M830 CNC control with electronic handwheel- Main and counter spindles-- each with C- and Y-axes-- 173 E collet chuck (A5)- Swivel head (B-axis 0–360° in 0.001° increments) on the main and counter spindles- 36 tools (24 of which are dr ...

greates pass round over bed: 700 mmswing diameter over slide rest: 380 mmmax. turning diameter: 410 mmcontrol: HEIDENHAIN - 4290 max. Spindle speed: 5.000 U/min.centre distance: 975 mmtravel -x axis: 300 mmtravel -y axis: 120 (+/- 60) mmtravel -z axis: 850 mmnumbers of positions in the tool changer: 12 tool taper: VDI40 CNC Turning- and Milling Center | DMG - CTX 800 Beta equipped with a turret for driven tools, SCHUNK lathe chuck (Ø 315 mm) as well as tailstock and chip conveyor.An extensive tool package is in the Scope of delivery includes.The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX800beta | CTX800 beta | CTX-800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 89440 €: 1690.42 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 3 : 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine  ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 37910 €: 724.08 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 480 - 16 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgdriven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultisuissewith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGT ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 €: 2623.32 €: 1020 mm: 2000 mm: 510 mm: 358 mm: 770 mm: 560 mm: 361 MK: 12 : 6,3 - 315 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 505 mm: 270 mm: 105 mm: 6 MK: 225 mm: 18.5 kW: 6400 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type D1, system like Mult ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 86980 €: 1643.92 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",F ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 €: 1650.92 €: 540 mm: 1500 mm: 85 mm: 310 mm: 350 mm: D1-8 : 1/20 MK: 3 : 27 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6 40%) kW: 0.02 mm: 0.016 mm: ISO3655 : 3340 mm: 1905 mm: 2235 mm: 3400 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type tailstock.Manual tailstoc ...

Technical details Type: CNC turning center / CNC lathe Power supply: 400 V / 3 phases Installed power: 20 kVA Maximum turning diameter: 210 mm Maximum turning length: 460 mm Bar capacity: 42 mm Spindle speed: Up to 6000 rpm Hydraulic chuck: 6” / 3 jaws X-axis travel: 215 mm Z-axis travel: 520 mm Rapid traverse speed X/Z: 30 m/min Main motor power: 11 / 15 kW Bed configuration: 30° inclined heavy-duty bed Equipment: - Automatic turret - Manual pulse generator - Hydraulic chuck - Adjustable hydraulic quill - Automatic lubrication system - Cooling system Application: Precision CNC turning and bar machining operations Condition: Used Auction-ID: A7-48425-7

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 24500 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and funct ...

: neu : Bulgarien : 81780 €: 1545.64 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113720 €: 2149.31 €: 800 mm: 2000 mm: 400 mm: 315 mm: 560 mm: 560 mm: 318 MK: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6100 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix i ...

BIGLIA B565 SM (2014) is a two-spindle CNC turning center, equipped with a GE Fanuc Series 32i MODEL B control and an S+M configuration with sub-spindle and rotating tools. Capabilities: Maximum turning diameter: 290 mm Maximum turning length: 560 mm Main spindle bar passage: Ø 65 mm Passage diameter above the bed: 580 mm Main pin: Speed: 30 to 4,000 RPM Spindle Nose: ASA 6\" Spindle Bore: 76 mm Chuck: 210 / 250 mm Engine power: 26 kW / 15 kW C-axis resolution: 0.001° Sub-spindle (S): Speed: 30 to 5,000 rpm Spindle Nose: ASA 5\" Chuck: 165 mm Engine power: 11 kW B-axis stroke: approx. 560 mm Turret and rotating tools (M): 12 positions, all motorizable Index time: 0.15 s Rotating tool speed: 30 to 4,000 rpm (6,000 rpm optional) Rotating tool power: 5.5 kW Tool section: 25 x 25 mm  ...

Manufacturer: HanwhaModel: XD38II-R NHYYear: 2023Numerical Control: Fanuc Series 32i-Model BCapacity: Ø38 mm max.Strokes: X1 95 mm, Y1 350 mm, Z1 320 mm, X2 95 mm, Y2 350 mm, Z2 320 mmEquipment: LNS Alpha 342 S2 bar feeder, high pressure 120 bar, LNS suction, fire systemTime: Machining 970 h, spindle 1150 h, power-up 3400 hDimensions (mm): 7150 × 2650 × 1900Weight (kg): 4600Serial number: B560310 Auction-ID: A1-48830-6

: neu : Bulgarien : 140320 €: 2652.05 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning ...

: neu : Bulgarien : 128710 €: 2432.62 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 5 - 1000 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 8550 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length ...

: neu : Bulgarien : 42910 €: 819.58 €: 400 mm: 750 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 4 : 18-98, 48-265, 144-790, 3 U/Min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 7.5 kW: 1530 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

turning diameter: 200 mmturning length: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: FANUC Series 18i TB weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 mLT with driven toolsThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL3mLT | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: FANUC Series 32i Model A weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: SIEMENS SINUMERIK 840D sl weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3 YThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 36884 centre distance: 1000 mm: 520 mm weight of the machine ca.: 2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 160 mmturning length: 250 mmcontrol: Mazatrol T 32-2 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMazatrol T 32-2 CNC controlmain spindle: collet chuck devicesub spindle: collet chuck device8-fold revolverbar loading device Technische Daten / technical details:max. Drehdurchmesser / max. turning diameter 160 mmmax. Schwingdurchmesser / max. rotary diameter 300 mmDrehlänge / turning length 250 mmX-Weg / X-travel 100 mmZ-Weg / Z-travel 290 mmDurchlass / spindle hole 40 mmDrehzahl / spindle speed 45-4500 UpM /rpmGewicht der Maschine / weight 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

turning diameter: 300 mmturning length: 497 mmcontrol: Mazatrol PC Fusion 640T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMazatrol PC Fusion CNC 640T CNC control3-jaw chuck12-fold revolverC-axisdriven toolsY-axistool presetting device (tool eye)tail stockchip conveyorcoolant devicebar loading device for 3m barsTechnische Daten: / technical detailsmax. Dreh-Ø / max. turning Ø 300 mmmax. Schwing-Ø / max rotary-Ø 525 mmmax. Drehlänge / max. turning length 497 mmDrehzahl / spindle speed 35-4000 UpM/ rpmAnzahl der Revolverplätze / numbers of tool places 12 X-Verfahrweg / x-travel 180 mmZ-Verfahrweg / z-travel 575 mmY-Verfahrweg / y-travel +-50 mmFutterdurchlass / spindle hole diameter 62 mmEilganggeschwindigkeit X, Z / rapid feed X, Z 30, 30 m/min.Gewicht der Maschine ca. / weight  ...

: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Control: NUM Teach-InMax. diameter above the bed: 380 mmMax. diameter above the carriage: 200 mmDistance between tips: 750 mmMax. turning length: 600 mmStrokes X × Z: 180 × 610 mmSpindle type: A2-6\"Spindle power: 11 kWRotational speeds: 0–3000 rpmMax. bar diameter: 62 mmTailstock: Morse code N°4, Ø sheath 60 mm, stroke 175 mmPower supply: 400 V / 50 HzIncluded equipment: touch screen on carriage, LCD control screen, AMESTRA Ø 200 mm 3-jaw chuck, set of hard jaws, AMESTRA type B turret, 5 AMESTRA quick-change tool holders, CM4 rotating tailstock, coolant tray with automatically controlled pump, lighting, 4 feetDimensions (mm): 1950 × 1320 × 1820Weight (kg): 2000Year: 2000Manufacturer: CAZENEUVE Auction-ID: A1-48609-268

turning diameter: 168 mmturning length: 145 mmtravel -x axis: 130 mmtravel -z axis: 110 mmSpindle Speed: 45 - 6.000 U/min.control: spindle passage: mmspindle bearing diameter: mmbar material dia.: mmtotal power requirement: kWmachine weight ab.: kgrapid traverse x + z axis: 18 / 24 m/minrapid traverse X- and Y-axis: 24 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mmturning diameter: 210 mmswing diameter over bed slide: 300 mmcentre height: 167 mmspindle bore: 40 mmbed width: 210 mmturning speeds: 40 - 2500 U/mintotal power requirement: - kWweight of the machine ca.: 1000 kg.range L-W-H: 2000 x 1000 x 1700 mmFeatures:- Digital display- 3-jaw chuck- Chuck guard- Multifix quick-change tool holder- Chip deflector- Chuck guard- Coolant system- Bed stop- Instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 €: 1 : 22600 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgThis machine is used in our workshop for repair work,therefore it has only been used very little so far.(New price € 37,910.00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guard ...