lathes used for sale (3,069)

Offered are 3 Fixed sticks for SUI 80 TOS TRENS SK bezels little used

faceplate diameter: 1250 mmturning diameter over slide rest: 2040 mmturning length: mmtotal power requirement: 55 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mBrand ZerbstMachine no D982Type DP 1 - 2.040 ØDigital readout Maximum turning diameter 2.040 mm øPassage 98 mm ø4-Jaw Chuck 1.250 mm øSpeed 4,5 - 224 RPMSeparate chisel support Engine power 55 kWExcluding slot table Quick-change holder Machine weight 12.000 kgDimensions:Head: 2.500 x 1.800 x 1.700 mmsupport: 2.200 x 1.800 x 2.000 mmElectrical panel: 2.200 x 600 x 2.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 381 mm

Victor Victor Vturn A26Y CNC lathe with Y-axis, driven tools and 2nd spindle CNC Control Fanuc Series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 rpm Spindle motor 22/15 Kw Travel X-axis 190 + 69.5 mm Y-axis travel +55 / -55 mm Travel Z-axis: 850 mm Travel of the W-axis (sub-spindle to main spindle) 830 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone VDI 40 Bar Feeder Irco-Breuning ILS MUK Spindle motor-driven tools 4000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Spindle and nut X-axis 1015037

Key data: 500 mm

804337 Spindle and nut X-axis TOS TRENS SN50 series

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 178 mm, 485 mm, 100 mm

Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg

Key data: 205 mm, 650 mm

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

Key data: 380 mm, 280 mm, 130 mm

Vest bezel range 200-380mm incl pins with rollers

1 fixed setting stick with roller quills 1 moving setting stick

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Göltebodt quick-change holder 21 x 300107 € 100,-- 3 x 300114 € 100,-- 1 x 300125 € 150,-- 1 x 300105 € 75,--

Clamping claw box made of solid steel GR 9 (new) 4 pieces

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

faceplate diameter: 1130 mmswing diameter: 1500 mmturning height: 1100 mmfaceplate diameter: mmswing diameter: mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: STANKOTYPEL 1512Build in: 1977with pneumatick 3-jaw stuck 1130 mmmax. turning diameter 1500 mmmax. turning height 1100 mmMotor 30 KWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1040/1900 mmturning length: 2000/3000/1250 mmswing diameter over bed slide: 740 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMake: EST-Ticinotype: 520/2000distance between centers min/max: 2000/3000 mmcenter height 520 mmMax. turning diameter over bed 1040 mmMax. turning diameter over support 710 mmmax. turning diameter/length 1900 x 1250 mmspindle passage 135 mmwith 3 jaw chuckwith 4-jaw chuckquick change holderin very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1250 mmturning length: 1500 mmswing diameter over bed slide: 850 mmtotal power requirement: 22 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3100x2150x1825 mBrand: JMTCLType: CW61125BDistance between centers: 1.500 mmCenterheight: 625 mmSwing over bed: 1.250 mm øSwing over support: 850 mm øMaximum turning diameter : 1.250ø x 1.500 mm øSpindle boring: 135 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 200 mmcontrol: Siemens Sinumerik total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1120 mmturning length: 6000 mmswing diameter over bed slide: 760 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: ColomboType: VUP 2SYear of make: 1978Distance between centers: 6.000 mmCentre height: 560 mmSwing over bed: 1.120 mm øSwing over support: 760 mm ø4-Jaw chuck: 1.000 mm øDigital read-out: SonyIncluding:1 x steady rest 520 mm ø1 x steady rest 950 mm ø1 x open steady restChisel holderChisel support automatic feedRapid traverse chisel supportElectrically movable counter centerDrilling bar:length 2046 mm x 170 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mmturning length: 1500 mmswing diameter over bed slide: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNext image can not be found: d833 tacchi mt400 (2)Brand: TacchiType: MT400Distance between centers: 1.500 mmCentre height: 400 mmSwing over bed: 800 mm øSwing over support: 250 mm øSwing in the gap: 550 mm øSpindle boring: 130 mm ø3-Jaw chuck: 390 mm øDigital read-outRapid traverse on longitudinal and cross travellingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 880 mmturning length: 6000 mmswing diameter over bed slide: 540 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: GeminisType: GE870Distance between centers: 6.000 mmCentre height: 440 mmSwing over bed: 880 mm øSwing over support: 540 mm øSwing in the gap: 1.100 mm øSpindle boring: 85 mm øSteadys: 400 mm ø + 600 mm ø3 jaw chuckDigital read-outThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 5000 mmturning diameter over bed: 4000 mmturning dia. in gap: 5000 mmspindle bore: 104 mmturning speeds: 1,4 - 71 (18x) U/mintotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw face plate Ø 3.150 mmmodular lathe!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mmturning length: 10000 mmturning diameter: 1250 mmspindle diameter: 105 mmspeed: 1,6 - 315 (x24) m/minvoltage: 380 Vtotal power requirement: 75 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw faceplatePower compoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: SIEMENS 850M total power requirement: 125 kWweight of the machine ca.: 38 tdimensions of the machine ca.: mStocknumber 1020042Type of machine CNC VTLMake PIETRO CARNAGHIType AC 10 CNCBuild in 1987Type of control Siemens 850 M/EFaceplate diameter 1000 mmMax. Swing diameter 1400 mmTurning height max. 1400 mmTotal Power (KW) totaal 125 Lenght (mm) 11000Width (mm) 8000Height (mm) 6000Weight 38000 kg Additional informationwith driven toolswith pallet changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3.000 mmswing diameter: 7.000 mmturning height: 3.000 mmControl: FANUC 18i-TB total power requirement: 60/75 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 8500 mmturning diameter over bed: 1070 mmturning diameter over slide rest: 800 mmspindle bore: 128 mmturning speeds: 1,12 - 1120 U/minControl: Alan Bradley 9-series total power requirement: 62 kWweight of the machine ca.: tdimensions of the machine ca.: m3 Shear Bed, Carriage can bypass Steady Rest and Tailstock6-position Sauter Turret360 mm Capacity Self Centering Hydraulic Steady Rest385 mm Capacity Rotaring Work Support (Used for Gun Barrels)800 mm 4-Jaw ChuckTailstock Quill diameter Ø 200 mmTailstock Taper M.T. 6Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.