lathes used for sale (3,069)

- HeidenHain ND-780 with 3 axis Read-outX, Zo, Z - HeidenHain LS388C Scales- 2 x CE-Chuck cover for 500 & 900 mm- SCHUNK 3 chuck Ø 400-102 - Bison 4 chuck - Steady rest Ø   30 - 210 mm- Steady rest Ø 210 - 370 mm

- Multi-Tasking Machining in a Single Machine Setup- Sub spindle for overtaking with full C-Axis- The INTEGREX IV series can finish all machining processes.- High speed, advanced milling spindle that can tilt up to 240 degrees swiveling.- Lower turret with rotary tool spindle so livew tooling- Chip conveyor with coolant and 15 Bar iKZ- Double chuck KNCS-N 210-53 SMW Autoblock- MAZAK Flex -GL150F Gantry Loader- Gripping range 200 x 120 length x 15 Kg

- Please note: not original pictures its only 3000 length not 5000 mm - 3 Guide way construction- 2 Axis HeidenHain Digital readout- Feed in 3 directions all tool post slide- Central lubrication - Work load flying in chuck 2500 Kg- Work load NOT supported 8500 Kg- Work load supported 10000 Kg - Optional 4 chuck ca 1200 mm- Optional 4 chuck ca 1500 mm- Optional package with 3 steady rest fixed model from   to  

- 3 chuck 1200 mm- Heidenhain Digital read out syhstem X / Z Axis- Feeds in 2 directions- Multi fix Tool systems with inserts

- X Stroke 1835 mm- Z Stroke 1000 mm- Table load 20 Ton- Ram size 230 x 230 mm - Stroke crossrail 800 mm - Stroke crossrail in 5 steps each 200 mm- Live tools 2000 Rpm- Power live tools 15 kW- ATC 18 station max L = 450 mm- Taper BT50 BIG PLUS- Full C-Axis 360.000 - Under power in AEROSPACE precision plant- 2020 Table bearing replaced- 2020 Ram bearing replaced- 2025 new chip conveyor

- Doubled support carriage- CNC controlled measuring and correction probe- Chip conveyor - internal and external clamping jaws (wheel clamp in and out)- overhauling cost 850k EUR- Under power free 02.2026

- C-Axis rapid traverve 400 Min- Turret indecing time 0,2 sec for 1 station- Heavy duty cutting (depth cut 6mm) 162.7 mL/Min- LNS Bar feeder new 2017- Large package tooling driven / live tools- 8 axis controlled with 2 spindles and turrets

- Chip conveyor - SMW Front and Rear chuck 700 mm - Double revolver 6+8 positions- Big Bore 360 mm- Tailstock with power quill- Tooling package included with inserts and jaws

- 4 Chuck 1400 mm- Steady rest 3 units Ø 100-1050- Roller steady open 2 units Ø 1120- KNOLL Chip conveyor 2022- Boring bar Ø 260 x 3500 mm- Boring bar Ø 200 x 1500 mm- Boring bar Ø 150 x 1100 mm

- Full C-Axis 360.000- Driven tools Axiaal & Radial - Driven tailstock-  Steady rest C-Type- Front chuck with 180 bore- Rear chuck with 180 bore- 3 guide way bed width 750 mm

Kitagawa Collet Chuck DHP65 A6

Collet Chuck Kitagawa DHP65 A8 New in the box For type Hainbuch collets

turning diameter over bed: 800 mmturning diameter over slide rest: 860 mmturning length: 6000 mmturning diameter: 800 mmswing diameter over bed slide: 800 mmswing diameter over cross slide guide: 520 mmspindle bore: 71 mmspeeds: 11,2 - 1800 U/minvolt: 400 Vchuck: 315 mmchuck: 630 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 330 mm, 1000 mm, 330 mm

Turning length: 1,000 mm Turning diameter: 330 mm above bed 160 mm over cross slide Spindle Passage: 52 mm Spindle speeds: 70 - 2,000 rpm Equipped with: - 1x fixed bezel, 1x rotating bezel - Zahrade Theorem - Clamping pallet - Cheek chuck protection - Coolant device Country of origin: Netherlands Machine LxWxH: 1,800 x 650 x 1,400 mm Machine weight: 750 kg

Key data: 430 mm, 1000 mm, 430 mm

Turning length: 1,000 mm Turning diameter over bed: 430 mm Turning diameter over slide: 255 mm Spindle speeds: 19 - 2,000 rpm Spindle bore: 56 mm Equipped with: - Various Multifix tool containers - Coolant device Country of origin: Germany Motor power: 7.5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Key data: 270 mm, 470 mm, 270 mm

Turning length: 470 mm Turning diameter over bed: 270 mm Turning diameter over cross slide: 145 mm Spindle speeds: 56 - 4000 rpm Spindle Passage: 26 mm Digital Readout: On X and Y Axes Country of origin: Netherlands Engine power: 1.75 hp Machine weight: 900 kg Machine LxWxH: 1200 x 460 x 1200 mm

Key data: 3000 mm, 7000 mm, 3000 mm

Stock number 1020041 Machine Type: CNC Carousel Lathe Make HANKOOK Type VLC 30/70 Year of construction 2004/2016 retrofit Control type FANUC 18i-TB Face plate diameter 3,000 mm Max. turning diameter 7,000 mm Max. turning height 3,000 mm Max. workpiece weight 40 ton Max. speed of face plates (rpm) 1-80 Feed rate (mm/rev) max. 2,000mm/min Rapid traverse max. 8,000 mm/min. Total power (KW) 60/75 Kw Information With C-axis and driven tools Me WzW for 16 tools With chip conveyor

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

turning diameter: 500 mmturning length: 1500 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmturning diameter over slide rest: 2500 mmturning length: mmControl: FAGOR 8050 T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1010063Type of machine CNC FacelatheMake TADUType FS 1250Build in nbType of control FAGOR, 8050TTurnung diameter over bed 2500 mm Additional information4-jaws chuck 1800 mmfloorplate 3250 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.