lathes used for sale (2,962)

Kitagawa Collet Chuck DHP65 A6

Collet Chuck Kitagawa DHP65 A8 New in the box For type Hainbuch collets

turning diameter over bed: 800 mmturning diameter over slide rest: 860 mmturning length: 6000 mmturning diameter: 800 mmswing diameter over bed slide: 800 mmswing diameter over cross slide guide: 520 mmspindle bore: 71 mmspeeds: 11,2 - 1800 U/minvolt: 400 Vchuck: 315 mmchuck: 630 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 330 mm, 1000 mm, 330 mm

Turning length: 1,000 mm Turning diameter: 330 mm above bed 160 mm over cross slide Spindle Passage: 52 mm Spindle speeds: 70 - 2,000 rpm Equipped with: - 1x fixed bezel, 1x rotating bezel - Zahrade Theorem - Clamping pallet - Cheek chuck protection - Coolant device Country of origin: Netherlands Machine LxWxH: 1,800 x 650 x 1,400 mm Machine weight: 750 kg

Key data: 430 mm, 1000 mm, 430 mm

Turning length: 1,000 mm Turning diameter over bed: 430 mm Turning diameter over slide: 255 mm Spindle speeds: 19 - 2,000 rpm Spindle bore: 56 mm Equipped with: - Various Multifix tool containers - Coolant device Country of origin: Germany Motor power: 7.5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Key data: 270 mm, 470 mm, 270 mm

Turning length: 470 mm Turning diameter over bed: 270 mm Turning diameter over cross slide: 145 mm Spindle speeds: 56 - 4000 rpm Spindle Passage: 26 mm Digital Readout: On X and Y Axes Country of origin: Netherlands Engine power: 1.75 hp Machine weight: 900 kg Machine LxWxH: 1200 x 460 x 1200 mm

Key data: 3000 mm, 7000 mm, 3000 mm

Stock number 1020041 Machine Type: CNC Carousel Lathe Make HANKOOK Type VLC 30/70 Year of construction 2004/2016 retrofit Control type FANUC 18i-TB Face plate diameter 3,000 mm Max. turning diameter 7,000 mm Max. turning height 3,000 mm Max. workpiece weight 40 ton Max. speed of face plates (rpm) 1-80 Feed rate (mm/rev) max. 2,000mm/min Rapid traverse max. 8,000 mm/min. Total power (KW) 60/75 Kw Information With C-axis and driven tools Me WzW for 16 tools With chip conveyor

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

turning diameter: 500 mmturning length: 1500 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmturning diameter over slide rest: 2500 mmturning length: mmControl: FAGOR 8050 T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1010063Type of machine CNC FacelatheMake TADUType FS 1250Build in nbType of control FAGOR, 8050TTurnung diameter over bed 2500 mm Additional information4-jaws chuck 1800 mmfloorplate 3250 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered are 3 Fixed sticks for SUI 80 TOS TRENS SK bezels little used

faceplate diameter: 1250 mmturning diameter over slide rest: 2040 mmturning length: mmtotal power requirement: 55 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mBrand ZerbstMachine no D982Type DP 1 - 2.040 ØDigital readout Maximum turning diameter 2.040 mm øPassage 98 mm ø4-Jaw Chuck 1.250 mm øSpeed 4,5 - 224 RPMSeparate chisel support Engine power 55 kWExcluding slot table Quick-change holder Machine weight 12.000 kgDimensions:Head: 2.500 x 1.800 x 1.700 mmsupport: 2.200 x 1.800 x 2.000 mmElectrical panel: 2.200 x 600 x 2.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 381 mm

Victor Victor Vturn A26Y CNC lathe with Y-axis, driven tools and 2nd spindle CNC Control Fanuc Series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 rpm Spindle motor 22/15 Kw Travel X-axis 190 + 69.5 mm Y-axis travel +55 / -55 mm Travel Z-axis: 850 mm Travel of the W-axis (sub-spindle to main spindle) 830 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone VDI 40 Bar Feeder Irco-Breuning ILS MUK Spindle motor-driven tools 4000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Spindle and nut X-axis 1015037

Key data: 500 mm

804337 Spindle and nut X-axis TOS TRENS SN50 series

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 178 mm, 485 mm, 100 mm

Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg

Key data: 205 mm, 650 mm

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

Key data: 380 mm, 280 mm, 130 mm

Vest bezel range 200-380mm incl pins with rollers

1 fixed setting stick with roller quills 1 moving setting stick

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Göltebodt quick-change holder 21 x 300107 € 100,-- 3 x 300114 € 100,-- 1 x 300125 € 150,-- 1 x 300105 € 75,--

Clamping claw box made of solid steel GR 9 (new) 4 pieces

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

faceplate diameter: 1130 mmswing diameter: 1500 mmturning height: 1100 mmfaceplate diameter: mmswing diameter: mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: STANKOTYPEL 1512Build in: 1977with pneumatick 3-jaw stuck 1130 mmmax. turning diameter 1500 mmmax. turning height 1100 mmMotor 30 KWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1040/1900 mmturning length: 2000/3000/1250 mmswing diameter over bed slide: 740 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMake: EST-Ticinotype: 520/2000distance between centers min/max: 2000/3000 mmcenter height 520 mmMax. turning diameter over bed 1040 mmMax. turning diameter over support 710 mmmax. turning diameter/length 1900 x 1250 mmspindle passage 135 mmwith 3 jaw chuckwith 4-jaw chuckquick change holderin very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.