lathes used for sale (3,074)

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mmturning length: 10000 mmturning diameter: 1250 mmspindle diameter: 105 mmspeed: 1,6 - 315 (x24) m/minvoltage: 380 Vtotal power requirement: 75 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw faceplatePower compoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: SIEMENS 850M total power requirement: 125 kWweight of the machine ca.: 38 tdimensions of the machine ca.: mStocknumber 1020042Type of machine CNC VTLMake PIETRO CARNAGHIType AC 10 CNCBuild in 1987Type of control Siemens 850 M/EFaceplate diameter 1000 mmMax. Swing diameter 1400 mmTurning height max. 1400 mmTotal Power (KW) totaal 125 Lenght (mm) 11000Width (mm) 8000Height (mm) 6000Weight 38000 kg Additional informationwith driven toolswith pallet changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3.000 mmswing diameter: 7.000 mmturning height: 3.000 mmControl: FANUC 18i-TB total power requirement: 60/75 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 8500 mmturning diameter over bed: 1070 mmturning diameter over slide rest: 800 mmspindle bore: 128 mmturning speeds: 1,12 - 1120 U/minControl: Alan Bradley 9-series total power requirement: 62 kWweight of the machine ca.: tdimensions of the machine ca.: m3 Shear Bed, Carriage can bypass Steady Rest and Tailstock6-position Sauter Turret360 mm Capacity Self Centering Hydraulic Steady Rest385 mm Capacity Rotaring Work Support (Used for Gun Barrels)800 mm 4-Jaw ChuckTailstock Quill diameter Ø 200 mmTailstock Taper M.T. 6Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmturning height: 1600 mmturning diameter over bed: 2150 mmturning speeds: 3,15 - 250 U/minvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 530 mmturning length: 8000 mmturning dia. in gap: 1080 mmspindle diameter: 95 mmspeed: 8-800 (21x) U/mintotal power requirement: 15/22 kWweight of the machine ca.: tdimensions of the machine ca.: m4-Jaw chuck3-Jaw chuck2x Steady Rest4-Way toolpostThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mmturning length: 2250 mmcontrol: CNCN 300 turning diameter over bed slide: 480 mm3-jaw-chuck diameter: 650 mmtotal power requirement: 44 kWweight of the machine ca.: tdimensions of the machine ca.: mVoltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1740 mmturning diameter over slide rest: 1300 mmturning length: 16000 mmturning speeds: 4-180 U/minRapid travel: chip conveyor: digital readout: steady: total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mmswing diameter: 1400 mmturning height: 1250 mmstroke of ram - solid: 750 mmSide head: 650 mmturning speeds: 4-210 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1800 mmturning diameter over slide rest: 1200 mmturning length: 16000 mmturning dia. in gap: 2300 mmspindle diameter: 150 mmspeed: 1 - 300 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mmturning diameter over slide rest: 1200 mmturning length: 7500 mmturning dia. in gap: 2500 mmspindle diameter: 105 mmspeed: 3,55 - 180 (x24) U/minvoltage: 380 Vtotal power requirement: 45 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Cooling pump for SN 71 C Trens lathe

Fixed bezel with roles Quill Used 400 mm forward

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details.

This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2018. It features a maximum turning diameter of 340 mm and a turning length of 570 mm. The machine includes a 12-station drum turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.

I'm selling a Mazak Multiplex 6200 lathe-mill. It's in very good condition, still powered up. Inspections are available by appointment. The machine is highly efficient, with two spindles, two independent heads, and a milling capability (C-axis). It's equipped with a partition wall that automatically closes from the control panel. When the wall is closed, the machine can operate as two independent lathes. It can also operate as a standard lathe with a retractable handle. I can send videos and more detailed photos of the machine. Transportation and training are available. I also have other machines for sale. Technical Specifications 640 Control (Windows) Milling Two spindles Two independent tool heads Mazatrol 640T Control Year of Manufacture: 2000 Spindle speed: 0-5000 rpm Milling speed: 0-4500 rpm Turning diameter: 320 mm Turning length: 440 mm Number of tools: 2 x 1 ...

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

AFM DEFUM TAE 35N HANKA CNC turning center was built by AFM DEFUM S.A. in Poland in 2017. The machine is used for precision machining of workpieces with even the most complex geometries. In addition to standard turning, the technical solutions used also allow, for example, the machining of drunken threads or the staggering of non-circular surfaces. Workpieces with a maximum diameter of 530 mm and length of 490 mm are fitted bettwen the centres or in the chuck itself. The machining process is performed by means of cutting tools, taken from a 12-position turret. The spindle, thanks to its unique design, significantly increases the geometric stability of the TAE-35N HANKA machine. It is made up of two parts, which enable mutual compensation of thermal deformations, created as a result of the heating of the machine during cutting. The AFM DEFUM TAE 35N CNC lathe is offered with equipme ...

This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, its ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine.

This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine.

This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine.

This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.