We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- Automatics (Lathes) For Bars (6)
- Bench Lathes For Precision Mechanics (6)
- Carousel Turning Machines (Lathes) (49)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (41)
- CNC Cycle Turning Machines (45)
- CNC Double Spindel Turning Maschines (Lathes) (20)
- CNC Long Turning Automatics (34)
- CNC Long Turning Machines (33)
- CNC Multiple Spindel Turning Lathes (12)
- CNC Sloping Beds (2)
- CNC Turning Automatics (26)
- CNC Turning Centers (240)
- CNC Turning Machines (550)
- Cutting-Off Machines (8)
- Cycle Lathes (36)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (265)
- Facing Disks (1)
- Facing Lathes (7)
- Facing Lathes With Tailstock (2)
- Feed Automatics (1)
- Heavy Lathes (30)
- High Precision Lathes (6)
- High Precision Turning Machines (Lathes) (6)
- Hollow Spindle Turning Machines (Lathes) (2)
- Horizontal Turning Centres (16)
- Horizontal Turning Machines (Lathes) (4)
- Longitudinal Turning Machines (Lathes) (6)
- Lunettes (17)
- Multi Spindle Automatics For Bars (31)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (35)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (23)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (14)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (1)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (17)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (96)
- Turning Machines (Lathes) And Turning Automatics (1)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (7)
- Universal Lathes > 800 Mm Diameter (7)
- Universal Lathes Up To 800 Mm Diameter (10)
- Universal Turning Machines (Lathes) (25)
- Vertical Turning Centres (2)
- Vertical Turning Machines (33)
- Vertical Turning Machines With Pick-Up Spindle (1)
- Vertical Turning Machines, Open Gap And Straight-Sided (1)
- Vertikal Turning Machines (Lathes) (46)
- Whirling And Thread Whirling Machines (1)
- more
- AB (1)
- abb (3)
- ACCUWAY (5)
- AFM DEFUM (1)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (1)
- ALEX TECH VIPER (1)
- AMUTIO-CAZENEUVE (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AVIA (1)
- AYEL-TECH (1)
- BAUER (2)
- Benzinger (9)
- BERG (1)
- Bernardo (20)
- BERTHIEZ (3)
- BIGLIA (20)
- BISON (1)
- BLANSKO (1)
- BOEHRINGER (21)
- BOEHRINGER-VDF (1)
- BOLEY (5)
- BRAUN ZERBST (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- Bulmak (2)
- BUMOTEC (1)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (30)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (2)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN MUELLER (1)
- CHIRON (1)
- CHUN ZU (1)
- CITIZEN (27)
- CKD (1)
- CKD BLANSKO (3)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (7)
- Colchester (39)
- COLCHESTER HARRISON (1)
- COLOMBO (2)
- COMEC (1)
- CONTUR (1)
- CRAWFORD SWIFT (2)
- CS (1)
- D (1)
- DAEWOO (10)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (22)
- DMG GILDEMEISTER (20)
- DMG GILDEMISTER (1)
- DMG MORI (44)
- DMG MORI SEIKI (1)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-MORI (1)
- DMT (3)
- DMT / KERN (1)
- DMT KERN (1)
- DMTG (1)
- DN SOLUTIONS (1)
- Doerries Scharmann (2)
- DOOASN (1)
- DOOSAN (63)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DREHMA (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (10)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (1)
- E/D/E, WUPPERTAL (1)
- EBOSA (2)
- ECHEA (1)
- ECOCA (1)
- ELMAG (8)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
AB 1
abb 3
ACCUWAY 5
AJAX 1
ARAD 1
AVIA 1
BAUER 2
BERG 1
Bernardo 20
BERTHIEZ 3
BIGLIA 20
BISON 1
BLANSKO 1
BOEHRINGER 21
BOLEY 5
Bulmak 2
BUMOTEC 1
CAORLE 1
CARNAGHI 1
CAZENEUVE 30
Celoria 2
CERUTI 1
CHIRON 1
CHUN ZU 1
CITIZEN 27
CKD 1
CLOVIS 1
CMT 3
CMZ 7
Colchester 39
COLOMBO 2
COMEC 1
CONTUR 1
CS 1
D 1
DAEWOO 10
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 22
DMG MORI 44
DMG-MORI 1
DMT 3
DMT KERN 1
DMTG 1
DOOASN 1
DOOSAN 63
DORMAC 1
DORRIES 1
DORRIES. 1
DREHMA 1
DUGARD 1
DÖRRIES 10
EBOSA 2
ECHEA 1
ECOCA 1
ELMAG 8
EMAG 34
Emco 45
Ergomat 5
ESCO 1
EUBAMA 1
EXcello 2
FALCON 1
FAMAR 5
FANUC 2
FARREL 1
FAT 3
FEELER 2
Feinbau 3
FELSOMAT 1
FMB 1
Forkardt 2
FORMAT 1
FRORIEP 3
GALLIC 1
GDW 2
GE 1
GEMA 2
GEMINIS 11
Gildemeister 141
Goodway 6
Graziano 3
GURUPTZE 1
GURUTZPE 9
GURUZTPE 1
Guss 2
GWM-TECH 2
HAAS 33
HANKOOK 5
HANWHA 10
HAPREMEC 1
HARDINGE 11
HARDINGS 1
Harrison 8
HARTFORD 1
HBM 9
HEID 1
HERKULES 2
HESSAP 1
HESSAPP 2
HNK 1
HOESCH 1
HOFFMAN 1
HUNGER 1
HURCO 7
HUVEMA 10
HWACHEON 11
Hyundai 20
HYUNDAI WIA 10
ICOCA 1
IEMCA 2
IMT 1
INDEX 90
INNSE 2
IRLE 1
JENN-WEI 1
JESSEY 7
JMTCL 1
JOHNFORD 4
KAMI 5
KEKEISEN 1
Kern 8
KERN-DMT 1
Kitagawa 2
KITAMURA 1
Klaaßen 3
Klopfer 2
KME 1
KMT 1
KNUTH 7
KOLOMNA 8
Kovosvit 3
LABOR 2
LACFER 3
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 2
LEINEN 3
LIEBER 1
LORCH 1
LÖW 2
M+M 1
MACMATIC 1
MAE 1
MAG IAS 1
MAHO 1
MAIER 2
MAMMUT 1
MANURHIN 6
MARTIN 7
MAS 11
MATEC 1
MATRA 5
Mazak 116
MCM 4
MERLI 1
METOSA 1
MEUSER 15
MEXPOL 3
MFD 2
MICROCUT 2
MIOTAL 4
MISAL 1
MIYANO 11
MNT 1
MONDIALE 8
MONFORTS 28
approved
dealer
dealer
MEISTER MASCHINEN
turning diameter: mmswing diameter: mmturning height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 400 mmturning diameter over slide rest: 245 mmturning length: 800 mmtotal power requirement: 4.5 kWweight of the machine ca.: 1.25 trequired space: 1.96x1.69x1.06 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 1500 mmspindle bore: 55 mmfaceplate: 550 mmsteady: 140 turning speeds: 40-1800 U/mindigital readout: Haidenhain bed width: 340 mmsteady: 140 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 1500 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 40-1800 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 520 mmturning diameter over slide rest: 340 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 33,5-1600 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 2500 mmswing diameter: 2800 mmturning height: 2200 mmtable load: 15 tturning speeds: U/minFeed: mm/Udigital readout: Rest: 2 Side head: total power requirement: 55 kWweight of the machine ca.: 56 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 5300 mmswing diameter: 6300 mmturning height: 2800 mmslide adjustment: 1700 mmtable load: 50 tturning speeds: 0,3-14 U/minFeed: 0,056-10 mm/Udigital readout: Sony Rest: 2 Side head: chip conveyor: total power requirement: 120 kWweight of the machine ca.: 187 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
swing diameter: 520 mmcentre height: 500 mmwidth: 130 mmquill:: 3 St.diameter of quill: 70 mmbearing diameter: 65 mmwidth: 20 mmbase plate: 415x270 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 1320 mmswing diameter: 1400 mmturning height: 800 mmworkpiece weight: 6000 kgcross rail adjustment: 800 mmTools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 Dtransmission ratio: 3 daylight table - ram: 950 mmslide adjustment: 750 mmtotal power requirement: 60 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 7,5x5,5x4,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 1100 mmturning length: 6000 mmcontrol: Siemens 840D turning diameter over slide: 740 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mDie Maschine ist Überholt und hat eine neue SteuerungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
swing diameter: 475 mmcentre height: 510 mmwidth: 110 mmloading area: 360x310 mmdiameter of quill: 80 mmbearing diameter: 75 mmWheel width: 36,5 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7500 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 1320 mmturning diameter over slide rest: 820 mmturning length: 4400 mmControl: faceplate: 1200 mmbed width: 800 mmspindle passage: 167 mmsteady: 480 control: IMS total power requirement: 76 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 1100 mmswing diameter: 1250 mmturning height: 1300 mmControl: Siemens type: 805 workpiece weight: 4000 kgTool changer: 10 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 2200 mmturning diameter over slide rest: 2200 mmturning length: 10000-11000 mmcontrol: Sinumerik 840 Dworkpiece weight: 70.000 kgfaceplate: 2000 mmsteady: 2 Torque: 125000 Nmfeed: 0,3-4000 mm/minrapid traverse: 4000 mm/minroll stand: total power requirement: 110 kWweight of the machine ca.: 120 tdimensions of the machine ca.: 22x6,2x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 20 mmturning length: 230 mmcontrol: Fanuc 16iT total power requirement: 0,55 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 2275 x 1300 x 1760 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 2200 mmswing diameter: 2500 mmturning height: 1600 mmControl: Siemens chip conveyor: total power requirement: 100 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mvertical lathe with two RAM, faceplate Ø 2000 mm, SPS supportedcontrol for storable cycles, RAM/channel 1 two Capto recordings C8 withInternal tool cooling, RAM/channel 2, two Capto mounts C8 withinternal tool cooling, Chip conveyor / spindle Z-axis as new / without KSSFilter unit / 3 glass scales are missing / control panel is disconnected but complete andOK, a 90 degree angle is missing from the control panel armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 1200 mmswing diameter: 1400 mmturning height: 1190 mmControl: Siemens type: 840C max. ram stroke: 1250 mmTool changer: 12 PosTable load: 9000 kgcross rail - adjustment: 800 mmturning speeds: 2,5-250 U/minrapid traverse: 4 m/mintotal power requirement: 55 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 3,95x3,6x5,56 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 820 mmturning length: 5000 mmturning diameter over slide: 460 mmcontrol: B2T max. torque on the spindle: 3400 Nmturning speeds: 5,6-1120 U/minFeed: 1-5000 mm/minRapid movement: 5000 mm/mintailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mmsteady: 525 mmsteady: 335 mmmain drive motor: 50 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 630 mmturning diameter over slide rest: 380 mmturning length: 400 mmspindle passage: 105 mmturning speeds: 24-1800 U/minRapid travel: steady for max. workpiece diameter from: 340 mm3 jaw chuck Forckrath: 315 mmthroat: 700 mmlength of gap: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
machine: 15 Pos.accessories:: Pos. electric measuring devices: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: mmspindle passage: 23 mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 8000 mmspeed: 800 U/minspindle passage: 105 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 1000 mmturning diameter over slide rest: 640 mmturning length: 6300 mmturning dia. in gap: 1250 mmspindle diameter: 50 mmspeed: 6-925 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 1150 mmturning diameter over slide rest: 800 mmturning length: 6300 mmspindle diameter: 100 mmspeed: 4-800 (x24) U/minturning dia. in gap: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 710 mmturning length: 2000 mmcontrol: Heidenhain type: Manuel Plus turning diameter over slide: 410 mmx-travel: 385 mmturning speeds: 9-1800 U/mintransmission ratio: 2 drive capacity - workpiece: 22 kWTorque: 2500 Nmspindle diameter: 160 mmspindle passage: 92 mmtotal power requirement: 49 KVAweight of the machine ca.: 5,6 tdimensions of the machine ca.: 5x2x2,2 mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 300 mmturning length: 1500 mmcontrol: FanucSystem 6 T total power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4x2x1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 60 mmcross-slide: 4 turret head: 6 Pos.thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 800 mmturning length: 2000 mmcontrol: Monfort R&D turning diameter over slide: 520 mmspindle hollow: 88 mmtotal power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: 4,2x2,2x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 290 mmturning length: 450 mmcontrol: CNC spindle passage: 65 mmturning diameter over slide: 185 mmturning speeds: 3000 U/minTool changer: 12 work piece power: VDI 40 live tooling: chip conveyor: kWcoolant: swing diameter: 600 mmtotal power requirement: 45 kWweight of the machine ca.: 4,7 tdimensions of the machine ca.: 4,5x2,5x2,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
